devel

devel@uclibc-ng.org

1130 discussions

[PATCH] ld.so: Add support of DT_RELR relocation format.

by Dmitry Chestnykh

Nowadays modern libcs like Glibc and musl currently support processing of RELATIVE relocations compressed with DT_RELR format. However I have noticed that uClibc-ng doesn't support this feature and if the source will be linked with `-Wl,-z,pack-relative-relos` (bfd) or `-Wl,--pack-dyn-relocs=relr` (lld) then ld.so cannot properly load the produced DSO. This patch is intended to fix this issue and adds applying of DT_RELR relative relocation. Signed-off-by: Dmitry Chestnykh <dm.chestnykh(a)gmail.com> --- include/elf.h | 8 +++++- ldso/include/dl-elf.h | 38 ++++++++++++++++++++++++++ ldso/ldso/dl-elf.c | 3 ++ ldso/ldso/dl-startup.c | 3 ++ libc/misc/internals/reloc_static_pie.c | 1 + 5 files changed, 52 insertions(+), 1 deletion(-) diff --git a/include/elf.h b/include/elf.h index b7edbade2..c2efa9978 100644 --- a/include/elf.h +++ b/include/elf.h @@ -60,6 +60,9 @@ typedef uint16_t Elf64_Section; typedef Elf32_Half Elf32_Versym; typedef Elf64_Half Elf64_Versym; +/* Type for relative relocations in DT_RELR format */ +typedef Elf32_Word Elf32_Relr; +typedef Elf64_Xword Elf64_Relr; /* The ELF file header. This appears at the start of every ELF file. */ @@ -818,7 +821,10 @@ typedef struct #define DT_ENCODING 32 /* Start of encoded range */ #define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/ #define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */ -#define DT_NUM 34 /* Number used */ +#define DT_RELRSZ 35 /* Size in bytes, of DT_RELR table */ +#define DT_RELR 36 /* Address of Relr relocs */ +#define DT_RELRENT 37 /* Size in bytes of one DT_RELR entry */ +#define DT_NUM 38 /* Number used */ #define DT_LOOS 0x6000000d /* Start of OS-specific */ #define DT_HIOS 0x6ffff000 /* End of OS-specific */ #define DT_LOPROC 0x70000000 /* Start of processor-specific */ diff --git a/ldso/include/dl-elf.h b/ldso/include/dl-elf.h index 2b99958d9..10b895733 100644 --- a/ldso/include/dl-elf.h +++ b/ldso/include/dl-elf.h @@ -250,5 +250,43 @@ unsigned int __dl_parse_dynamic_info(ElfW(Dyn) *dpnt, unsigned long dynamic_info (((X) & PF_W) ? PROT_WRITE : 0) | \ (((X) & PF_X) ? PROT_EXEC : 0)) +/* Apply relocations in DT_RELR format */ +#define DL_DO_RELOCATE_RELR(load_addr, relr_start, relr_end) \ + do { \ + const ElfW(Relr) *relr = 0; \ + ElfW(Addr) *reloc_addr = 0; \ + for (relr = relr_start; relr < relr_end; relr++) { \ + ElfW(Relr) relr_entry = *relr; \ + if (!(relr_entry & 1)) \ + { \ + reloc_addr = (ElfW(Addr) *)DL_RELOC_ADDR(load_addr, relr_entry); \ + *reloc_addr = (ElfW(Addr))DL_RELOC_ADDR(load_addr, reloc_addr); \ + reloc_addr++; \ + } \ + else \ + { \ + for (long int i = 0; (relr_entry >>= 1) != 0; ++i) { \ + if ((relr_entry & 1) != 0) \ + reloc_addr[i] = (ElfW(Addr))DL_RELOC_ADDR(load_addr, reloc_addr[i]); \ + } \ + reloc_addr += CHAR_BIT * sizeof(ElfW(Relr)) - 1; \ + } \ + } \ + } while (0); + +/* The macro to prepare data for the above DL_DO_RELOCATE_RELR */ +#define DL_RELOCATE_RELR(dyn) \ + do { \ + if (dyn->dynamic_info[DT_RELRENT]) \ + _dl_assert(dyn->dynamic_info[DT_RELRENT] == sizeof(ElfW(Relr))); \ + if (dyn->dynamic_info[DT_RELR] && \ + dyn->dynamic_info[DT_RELRSZ]) { \ + ElfW(Relr) *relr_start = (ElfW(Relr) *)((ElfW(Addr))dyn->loadaddr + (ElfW(Addr))dyn->dynamic_info[DT_RELR]); \ + ElfW(Relr) *relr_end = (ElfW(Relr) *)((const char *)relr_start + dyn->dynamic_info[DT_RELRSZ]); \ + _dl_if_debug_dprint("Relocating DT_RELR in %s: start:%p, end:%p\n", \ + dyn->libname, (void *)relr_start, (void *)relr_end); \ + DL_DO_RELOCATE_RELR(dyn->loadaddr, relr_start, relr_end); \ + } \ + } while (0); #endif /* _DL_ELF_H */ diff --git a/ldso/ldso/dl-elf.c b/ldso/ldso/dl-elf.c index 8210a012e..cc42b904f 100644 --- a/ldso/ldso/dl-elf.c +++ b/ldso/ldso/dl-elf.c @@ -1027,6 +1027,9 @@ int _dl_fixup(struct dyn_elf *rpnt, struct r_scope_elem *scope, int now_flag) return goof; } + /* Process DT_RELR relative relocations */ + DL_RELOCATE_RELR(tpnt); + reloc_size = tpnt->dynamic_info[DT_RELOC_TABLE_SIZE]; /* On some machines, notably SPARC & PPC, DT_REL* includes DT_JMPREL in its range. Note that according to the ELF spec, this is completely legal! */ diff --git a/ldso/ldso/dl-startup.c b/ldso/ldso/dl-startup.c index 989711fcc..674c4b7b9 100644 --- a/ldso/ldso/dl-startup.c +++ b/ldso/ldso/dl-startup.c @@ -264,6 +264,9 @@ DL_START(unsigned long args) that once we are done, we have considerably more flexibility. */ SEND_EARLY_STDERR_DEBUG("About to do library loader relocations\n"); + /* Process DT_RELR relative relocations */ + DL_RELOCATE_RELR(tpnt); + { int indx; #if defined(ELF_MACHINE_PLTREL_OVERLAP) diff --git a/libc/misc/internals/reloc_static_pie.c b/libc/misc/internals/reloc_static_pie.c index ab1923024..7ad80f97b 100644 --- a/libc/misc/internals/reloc_static_pie.c +++ b/libc/misc/internals/reloc_static_pie.c @@ -53,6 +53,7 @@ reloc_static_pie(ElfW(Addr) load_addr) PERFORM_BOOTSTRAP_GOT(tpnt); #endif + DL_RELOCATE_RELR(tpnt); #if defined(ELF_MACHINE_PLTREL_OVERLAP) # define INDX_MAX 1 -- 2.43.0

9 months, 2 weeks

[PATCH] Fix redefinition of _GNU_SOURCE.

by Dmitry Chestnykh

libc/misc/getloadavg/getloadavg.c:26: warning: "_GNU_SOURCE" redefined 26 | #define _GNU_SOURCE | In file included from <command-line>: ./include/libc-symbols.h:52: note: this is the location of the previous definition 52 | #define _GNU_SOURCE 1 Signed-off-by: Dmitry Chestnykh <dm.chestnykh(a)gmail.com> --- libc/misc/getloadavg/getloadavg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/libc/misc/getloadavg/getloadavg.c b/libc/misc/getloadavg/getloadavg.c index 2aee565c0..0d98119a9 100644 --- a/libc/misc/getloadavg/getloadavg.c +++ b/libc/misc/getloadavg/getloadavg.c @@ -23,7 +23,9 @@ * Imported from musl C library */ +#ifndef _GNU_SOURCE #define _GNU_SOURCE +#endif /* _GNU_SOURCE */ #include <stdlib.h> #include <sys/sysinfo.h> -- 2.43.0

9 months, 2 weeks

[PATCH] ld.so: Add support of DT_RELR relocation format.

by Dmitry Chestnykh

Nowadays modern libcs like Glibc and musl currently support processing of RELATIVE relocations compressed with DT_RELR format. However I have noticed that uClibc-ng doesn't support this feature and if the source will be linked with `-Wl,-z,pack-relative-relos` (bfd) or `-Wl,--pack-dyn-relocs=relr` (lld) then ld.so cannot properly load the produced DSO. This patch is intended to fix this issue and adds applying of DT_RELR relative relocation. --- include/elf.h | 8 +++++- ldso/include/dl-elf.h | 38 ++++++++++++++++++++++++++ ldso/ldso/dl-elf.c | 3 ++ ldso/ldso/dl-startup.c | 3 ++ libc/misc/internals/reloc_static_pie.c | 1 + 5 files changed, 52 insertions(+), 1 deletion(-) diff --git a/include/elf.h b/include/elf.h index b7edbade2..c2efa9978 100644 --- a/include/elf.h +++ b/include/elf.h @@ -60,6 +60,9 @@ typedef uint16_t Elf64_Section; typedef Elf32_Half Elf32_Versym; typedef Elf64_Half Elf64_Versym; +/* Type for relative relocations in DT_RELR format */ +typedef Elf32_Word Elf32_Relr; +typedef Elf64_Xword Elf64_Relr; /* The ELF file header. This appears at the start of every ELF file. */ @@ -818,7 +821,10 @@ typedef struct #define DT_ENCODING 32 /* Start of encoded range */ #define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/ #define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */ -#define DT_NUM 34 /* Number used */ +#define DT_RELRSZ 35 /* Size in bytes, of DT_RELR table */ +#define DT_RELR 36 /* Address of Relr relocs */ +#define DT_RELRENT 37 /* Size in bytes of one DT_RELR entry */ +#define DT_NUM 38 /* Number used */ #define DT_LOOS 0x6000000d /* Start of OS-specific */ #define DT_HIOS 0x6ffff000 /* End of OS-specific */ #define DT_LOPROC 0x70000000 /* Start of processor-specific */ diff --git a/ldso/include/dl-elf.h b/ldso/include/dl-elf.h index 2b99958d9..10b895733 100644 --- a/ldso/include/dl-elf.h +++ b/ldso/include/dl-elf.h @@ -250,5 +250,43 @@ unsigned int __dl_parse_dynamic_info(ElfW(Dyn) *dpnt, unsigned long dynamic_info (((X) & PF_W) ? PROT_WRITE : 0) | \ (((X) & PF_X) ? PROT_EXEC : 0)) +/* Apply relocations in DT_RELR format */ +#define DL_DO_RELOCATE_RELR(load_addr, relr_start, relr_end) \ + do { \ + const ElfW(Relr) *relr = 0; \ + ElfW(Addr) *reloc_addr = 0; \ + for (relr = relr_start; relr < relr_end; relr++) { \ + ElfW(Relr) relr_entry = *relr; \ + if (!(relr_entry & 1)) \ + { \ + reloc_addr = (ElfW(Addr) *)DL_RELOC_ADDR(load_addr, relr_entry); \ + *reloc_addr = (ElfW(Addr))DL_RELOC_ADDR(load_addr, reloc_addr); \ + reloc_addr++; \ + } \ + else \ + { \ + for (long int i = 0; (relr_entry >>= 1) != 0; ++i) { \ + if ((relr_entry & 1) != 0) \ + reloc_addr[i] = (ElfW(Addr))DL_RELOC_ADDR(load_addr, reloc_addr[i]); \ + } \ + reloc_addr += CHAR_BIT * sizeof(ElfW(Relr)) - 1; \ + } \ + } \ + } while (0); + +/* The macro to prepare data for the above DL_DO_RELOCATE_RELR */ +#define DL_RELOCATE_RELR(dyn) \ + do { \ + if (dyn->dynamic_info[DT_RELRENT]) \ + _dl_assert(dyn->dynamic_info[DT_RELRENT] == sizeof(ElfW(Relr))); \ + if (dyn->dynamic_info[DT_RELR] && \ + dyn->dynamic_info[DT_RELRSZ]) { \ + ElfW(Relr) *relr_start = (ElfW(Relr) *)((ElfW(Addr))dyn->loadaddr + (ElfW(Addr))dyn->dynamic_info[DT_RELR]); \ + ElfW(Relr) *relr_end = (ElfW(Relr) *)((const char *)relr_start + dyn->dynamic_info[DT_RELRSZ]); \ + _dl_if_debug_dprint("Relocating DT_RELR in %s: start:%p, end:%p\n", \ + dyn->libname, (void *)relr_start, (void *)relr_end); \ + DL_DO_RELOCATE_RELR(dyn->loadaddr, relr_start, relr_end); \ + } \ + } while (0); #endif /* _DL_ELF_H */ diff --git a/ldso/ldso/dl-elf.c b/ldso/ldso/dl-elf.c index 8210a012e..cc42b904f 100644 --- a/ldso/ldso/dl-elf.c +++ b/ldso/ldso/dl-elf.c @@ -1027,6 +1027,9 @@ int _dl_fixup(struct dyn_elf *rpnt, struct r_scope_elem *scope, int now_flag) return goof; } + /* Process DT_RELR relative relocations */ + DL_RELOCATE_RELR(tpnt); + reloc_size = tpnt->dynamic_info[DT_RELOC_TABLE_SIZE]; /* On some machines, notably SPARC & PPC, DT_REL* includes DT_JMPREL in its range. Note that according to the ELF spec, this is completely legal! */ diff --git a/ldso/ldso/dl-startup.c b/ldso/ldso/dl-startup.c index 989711fcc..674c4b7b9 100644 --- a/ldso/ldso/dl-startup.c +++ b/ldso/ldso/dl-startup.c @@ -264,6 +264,9 @@ DL_START(unsigned long args) that once we are done, we have considerably more flexibility. */ SEND_EARLY_STDERR_DEBUG("About to do library loader relocations\n"); + /* Process DT_RELR relative relocations */ + DL_RELOCATE_RELR(tpnt); + { int indx; #if defined(ELF_MACHINE_PLTREL_OVERLAP) diff --git a/libc/misc/internals/reloc_static_pie.c b/libc/misc/internals/reloc_static_pie.c index ab1923024..7ad80f97b 100644 --- a/libc/misc/internals/reloc_static_pie.c +++ b/libc/misc/internals/reloc_static_pie.c @@ -53,6 +53,7 @@ reloc_static_pie(ElfW(Addr) load_addr) PERFORM_BOOTSTRAP_GOT(tpnt); #endif + DL_RELOCATE_RELR(tpnt); #if defined(ELF_MACHINE_PLTREL_OVERLAP) # define INDX_MAX 1 -- 2.43.0

9 months, 3 weeks

Fixes for Clang warnings

by Marius Melzer

Hi, I fixed two kinds of Clang warnings in uclibc-ng (see patches attached). Is that something you would be willing to include? Best regards, Marius -- Marius Melzer, marius.melzer(a)kernkonzept.com Kernkonzept GmbH, Dresden, Germany, HRB 31129, CEO Dr.-Ing. Michael Hohmuth

10 months, 3 weeks

new release 1.0.45

by Waldemar Brodkorb

Hi uClibc-ng users and devs, I released 1.0.45 today. It contains rather more changes than in the last cycle. Ben Wolsieffer (3): fork: generate stub on no-MMU systems arm: elf-fdpic.h: avoid void pointer subtraction libpthread/nptl: make default stack size configurable Greg Ungerer (1): elf: support ELF binaries in noMMU Marcus Haehnel (3): fnmatch: fix possible access beyond of parameter string getaddrinfo.c: Avoid misleading indentation warning linuxthreads: Avoid unused variable warning Marcus Hähnel (1): setjmp.h: Fix C++ build and avoid duplicate throw declaration Max Filippov (1): daemon.c: make _fork_parent static inline again Paul Iannetta (1): kvx: fix asm syntax Pavel Kozlov (6): setrlimit/getrlimit: fix prlimit64 syscall use for 32-bit CPUs Fix -Warray-parameter warning for __sigsetjmp prlimit: add name redirection and fix incorrect parameters to syscall arc: add acq/rel variants for atomic cmpxchg/xchg arc: remove read ahead in asm strcmp code for ARCHS rlimit: fix 64-bit RLIM64_INFINITY macro Waldemar Brodkorb (8): aarch64: add hwcap header file fcntl.h: declare f_owner_ex for all architectures arm: add hwcap header file lm32: disable ctor/dtor aarch64: disable lazy relocations riscv64: define __NR_riscv_flush_icache if not available depend on __UCLIBC_HAVE_STATX__ bump version for 1.0.45 release Yann Sionneau (9): fstatat64: define it as a wrapper of statx if the kernel does not support fstatat64 syscall fstat: add missing return value statement for the statx wrapping case add support for systems without legacy setrlimit/getrlimit syscalls fstatat: add wrapper that uses statx for non-legacy arch kvx: add support for kv3-2 (Coolidge v2 SoC) kvx: atomic: rework using compiler builtins kvx: align specification of user regs kvx: define that kvx port supports statx syscall kvx: use a custom stat.h header lordrasmus (8): add vsdo support fix file permissions fix getauxval() on aarch64 gcc 11 vdso support missing file c6x compile fix vdso support gettimeofday() only include ldso.h if vdso support is activated vdso support for x86_64 gitignore Happy Hacking! Waldemar

11 months, 2 weeks

[PATCH] elf: support ELF binaries in noMMU

by Greg Ungerer

The Linux kernels ELF-FDPIC binfmt program loader can support loading and running conventional ELF format binaries on noMMU kernels when compiled appropriately. That is when they are constant displacement binaries such as generated using the -pie compile option. Add a configure option to allow selecting ELF binary support in noMMU mode configurations on architectures that support this. The main requirement is to generate the ldso run-time loader to perform relocation at load time. These configurations do not support shared libraries, so there is no need to generate a full shared library, only the static version is required. The use of ELF format binaries does mean a slightly simpler toolchain generation (does not require a -uclinux- for some architectures) and does not require an extra tool like elf2flt. This initial support targets M68K, ARM and RISC-V architectures. No kernel changes are required, the required support for this is already in mainline kernels (certainly as of linux-6.6). Note that for the M68K and ARM architectures that the initialized registers and stack layout at process startup is slightly different for the flat format loader and the ELF/ELF-FDPIC loaders. So we need some changes to the startup code (crt1.S) for them. I have not done extensive testing outside of M68K, ARM and RISC-V. I had to make changes to a couple of the dl-startup.h architecture files to get them to build for this noMMU case. I did not dig down too deep on the reasons, but they still seem ok for the MMU case as well. Signed-off-by: Greg Ungerer <gerg(a)linux-m68k.org> --- Makerules | 3 +++ Rules.mak | 2 ++ extra/Configs/Config.in | 9 +++++++-- extra/Configs/Config.in.arch | 8 ++++++++ ldso/include/dl-defs.h | 2 -- ldso/include/ldso.h | 2 +- ldso/ldso/arm/dl-startup.h | 2 ++ ldso/ldso/m68k/dl-startup.h | 3 +++ ldso/ldso/m68k/dl-sysdep.h | 2 ++ ldso/ldso/riscv64/dl-startup.h | 2 ++ libc/sysdeps/linux/arm/crt1.S | 2 +- libc/sysdeps/linux/m68k/crt1.S | 10 +++++++--- 12 files changed, 38 insertions(+), 9 deletions(-) diff --git a/Makerules b/Makerules index 845d81897..1a7443c39 100644 --- a/Makerules +++ b/Makerules @@ -22,6 +22,9 @@ ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y) libs: $(lib-gdb-y) endif libs: $(lib-a-y) +ifeq ($(HAVE_LDSO),y) +$(lib-a-y): | $(ldso) +endif endif objs: all_objs $(lib-so-y) $(lib-a-y): | $(top_builddir)lib diff --git a/Rules.mak b/Rules.mak index 5b9154b72..2aacee521 100644 --- a/Rules.mak +++ b/Rules.mak @@ -167,6 +167,8 @@ endif ifneq ($(HAVE_SHARED),y) libc := +endif +ifneq ($(HAVE_LDSO),y) interp := ldso := endif diff --git a/extra/Configs/Config.in b/extra/Configs/Config.in index 287db13d2..18748d54b 100644 --- a/extra/Configs/Config.in +++ b/extra/Configs/Config.in @@ -333,8 +333,9 @@ config STATIC_PIE bool "Add support for Static Position Independent Executables (PIE)" default n depends on DOPIC && !UCLIBC_FORMAT_FDPIC_ELF && \ - (TARGET_arm || TARGET_i386 || TARGET_x86_64 || TARGET_aarch64 || \ - TARGET_mips || TARGET_xtensa || TARGET_powerpc) + (TARGET_aarch64 || TARGET_arm || TARGET_i386 || \ + TARGET_m68k || TARGET_mips || TARGET_powerpc || \ + TARGET_riscv64 || TARGET_x86_64 || TARGET_xtensa) config ARCH_HAS_NO_SHARED bool @@ -346,9 +347,13 @@ config ARCH_HAS_NO_LDSO config ARCH_HAS_UCONTEXT bool +config HAVE_LDSO + bool + config HAVE_SHARED bool "Enable shared libraries" depends on !ARCH_HAS_NO_SHARED + select HAVE_LDSO default y help If you wish to build uClibc with support for shared libraries then diff --git a/extra/Configs/Config.in.arch b/extra/Configs/Config.in.arch index 91b639493..4bcf3ff3f 100644 --- a/extra/Configs/Config.in.arch +++ b/extra/Configs/Config.in.arch @@ -10,6 +10,14 @@ if !ARCH_USE_MMU choice prompt "Target File Format" +config UCLIBC_FORMAT_ELF + bool "ELF (using ELF_FDPIC loader)" + depends on !ARCH_USE_MMU && (TARGET_arm || TARGET_m68k || \ + TARGET_riscv64) + select DOPIC + select STATIC_PIE + select ARCH_HAS_NO_SHARED + select HAVE_LDSO config UCLIBC_FORMAT_FDPIC_ELF bool "FDPIC ELF" depends on !ARCH_USE_MMU && (TARGET_bfin || TARGET_frv || TARGET_arm) diff --git a/ldso/include/dl-defs.h b/ldso/include/dl-defs.h index daa6685cb..e404f17ec 100644 --- a/ldso/include/dl-defs.h +++ b/ldso/include/dl-defs.h @@ -72,10 +72,8 @@ typedef struct { #endif #ifdef _LIBC -#ifndef __ARCH_HAS_NO_SHARED__ /* arch specific defines */ #include <dl-sysdep.h> -#endif #ifdef __TARGET_c6x__ #include <dl-sysdep.h> #endif diff --git a/ldso/include/ldso.h b/ldso/include/ldso.h index 8d9d057a0..80d5d5dd5 100755 --- a/ldso/include/ldso.h +++ b/ldso/include/ldso.h @@ -48,7 +48,7 @@ /* Pull in the MIN macro */ #include <sys/param.h> /* Pull in the ldso syscalls and string functions */ -#ifndef __ARCH_HAS_NO_SHARED__ +#if !defined(__ARCH_HAS_NO_SHARED__) || !defined(__ARCH_HAS_NO_LDSO__) #include <dl-syscall.h> #include <dl-string.h> /* Now the ldso specific headers */ diff --git a/ldso/ldso/arm/dl-startup.h b/ldso/ldso/arm/dl-startup.h index cacd461e1..d00e7b053 100644 --- a/ldso/ldso/arm/dl-startup.h +++ b/ldso/ldso/arm/dl-startup.h @@ -301,3 +301,5 @@ int raise(int sig) _dl_exit(1); } #endif /* __FDPIC__ */ + +#define DL_UPDATE_LOADADDR_HDR(LOADADDR, ADDR, PHDR) diff --git a/ldso/ldso/m68k/dl-startup.h b/ldso/ldso/m68k/dl-startup.h index dfece443f..9c3285e27 100644 --- a/ldso/ldso/m68k/dl-startup.h +++ b/ldso/ldso/m68k/dl-startup.h @@ -55,6 +55,9 @@ _dl_start_user:\n\ * do something a little more subtle here. */ #define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long *) ARGS) + 1) +/* We can't call functions earlier in the dl startup process */ +#define NO_FUNCS_BEFORE_BOOTSTRAP + /* Handle relocation of the symbols in the dynamic loader. */ static __always_inline void PERFORM_BOOTSTRAP_RELOC(ELF_RELOC *rpnt, unsigned long *reloc_addr, diff --git a/ldso/ldso/m68k/dl-sysdep.h b/ldso/ldso/m68k/dl-sysdep.h index 21937b259..5d2d7a097 100644 --- a/ldso/ldso/m68k/dl-sysdep.h +++ b/ldso/ldso/m68k/dl-sysdep.h @@ -83,3 +83,5 @@ elf_machine_relative (Elf32_Addr load_off, const Elf32_Addr rel_addr, *reloc_addr = load_off + rpnt->r_addend; } while (--relative_count); } + +#define DL_UPDATE_LOADADDR_HDR(LOADADDR, ADDR, PHDR) diff --git a/ldso/ldso/riscv64/dl-startup.h b/ldso/ldso/riscv64/dl-startup.h index dabe1bebd..82e525e66 100644 --- a/ldso/ldso/riscv64/dl-startup.h +++ b/ldso/ldso/riscv64/dl-startup.h @@ -88,3 +88,5 @@ void PERFORM_BOOTSTRAP_RELOC(ELF_RELOC *rpnt, ElfW(Addr) *reloc_addr, _dl_exit(1); } } + +#define DL_UPDATE_LOADADDR_HDR(LOADADDR, ADDR, PHDR) diff --git a/libc/sysdeps/linux/arm/crt1.S b/libc/sysdeps/linux/arm/crt1.S index fade1d25c..799f11080 100644 --- a/libc/sysdeps/linux/arm/crt1.S +++ b/libc/sysdeps/linux/arm/crt1.S @@ -245,7 +245,7 @@ _start: mov fp, #0 mov lr, #0 -#ifdef __ARCH_USE_MMU__ +#if defined(__ARCH_USE_MMU__) || defined(__UCLIBC_FORMAT_ELF__) #ifdef L_rcrt1 /* We don't need to save a1 since no dynamic linker should have run */ ldr a1, .L_GOT /* Get value at .L_GOT + 0 (offset to GOT)*/ diff --git a/libc/sysdeps/linux/m68k/crt1.S b/libc/sysdeps/linux/m68k/crt1.S index 815a6076f..e7292682b 100644 --- a/libc/sysdeps/linux/m68k/crt1.S +++ b/libc/sysdeps/linux/m68k/crt1.S @@ -78,9 +78,13 @@ _start: sub.l %fp, %fp #if !defined __ARCH_USE_MMU__ && defined __PIC__ +#ifdef UCLIBC_FORMAT_ELF + move.l #_GLOBAL_OFFSET_TABLE_, %a5 +#else /* Set up the global pointer. The GOT is at the beginning of the data segment, whose address is in %d5. */ move.l %d5,%a5 +#endif .equ have_current_got, 1 #endif @@ -92,11 +96,11 @@ _start: arguments for `main': argc, argv. envp will be determined later in __libc_start_main. */ move.l (%sp)+, %d0 /* Pop the argument count. */ -#ifndef __ARCH_USE_MMU__ - move.l (%sp)+, %a0 -#else +#if defined(__ARCH_USE_MMU__) || defined(__UCLIBC_FORMAT_ELF__) move.l %sp, %a0 /* The argument vector starts just at the current stack top. */ +#else + move.l (%sp)+, %a0 #endif /* Provide the highest stack address to the user code (for stacks -- 2.25.1

11 months, 2 weeks

[PATCH] linuxthreads: Avoid definiton without prototype warning

by Marcus Haehnel

The spurious_wakeup_count variable is set but is never actually used for the semaphore implementation. To avoid a clang warning for this case remove the unused variable. --- libpthread/linuxthreads/semaphore.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/libpthread/linuxthreads/semaphore.c b/libpthread/linuxthreads/semaphore.c index 9025dfee6..9464204a9 100644 --- a/libpthread/linuxthreads/semaphore.c +++ b/libpthread/linuxthreads/semaphore.c @@ -61,7 +61,6 @@ int sem_wait(sem_t * sem) volatile pthread_descr self = thread_self(); pthread_extricate_if extr; int already_canceled = 0; - int spurious_wakeup_count; /* Set up extrication interface */ extr.pu_object = sem; @@ -90,7 +89,6 @@ int sem_wait(sem_t * sem) } /* Wait for sem_post or cancellation, or fall through if already canceled */ - spurious_wakeup_count = 0; while (1) { suspend(self); @@ -98,8 +96,7 @@ int sem_wait(sem_t * sem) && (THREAD_GETMEM(self, p_woken_by_cancel) == 0 || THREAD_GETMEM(self, p_cancelstate) != PTHREAD_CANCEL_ENABLE)) { - /* Count resumes that don't belong to us. */ - spurious_wakeup_count++; + /* Resume does not belong to us. */ continue; } break; @@ -213,7 +210,6 @@ int sem_timedwait(sem_t *sem, const struct timespec *abstime) pthread_descr self = thread_self(); pthread_extricate_if extr; int already_canceled = 0; - int spurious_wakeup_count; __pthread_lock(&sem->__sem_lock, self); if (sem->__sem_value > 0) { @@ -250,7 +246,6 @@ int sem_timedwait(sem_t *sem, const struct timespec *abstime) __pthread_do_exit(PTHREAD_CANCELED, CURRENT_STACK_FRAME); } - spurious_wakeup_count = 0; while (1) { if (timedsuspend(self, abstime) == 0) { @@ -277,8 +272,7 @@ int sem_timedwait(sem_t *sem, const struct timespec *abstime) && (THREAD_GETMEM(self, p_woken_by_cancel) == 0 || THREAD_GETMEM(self, p_cancelstate) != PTHREAD_CANCEL_ENABLE)) { - /* Count resumes that don't belong to us. */ - spurious_wakeup_count++; + /* Resume does not belong to us. */ continue; } break; -- 2.42.0

1 year

[PATCH] getaddrinfo.c: Avoid misleading indentation warning

by Marcus Haehnel

When compiling getaddrinfo.c with clang the -Wmisleading-indentation option will cause a warning due to the indentation lining up with the previous statement in the if block above. For gcc the warning is blinded by the commented line. See also: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107162 Move the comment behind the function call to make both compilers happy. --- libc/inet/getaddrinfo.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/libc/inet/getaddrinfo.c b/libc/inet/getaddrinfo.c index a9000ae13..f34a4726c 100644 --- a/libc/inet/getaddrinfo.c +++ b/libc/inet/getaddrinfo.c @@ -959,8 +959,7 @@ getaddrinfo(const char *name, const char *service, last_i = i; if (hints->ai_family == AF_UNSPEC && (i & GAIH_OKIFUNSPEC)) continue; - /*if (p) - freeaddrinfo works ok on NULL too */ - freeaddrinfo(p); + freeaddrinfo(p); /* freeaddrinfo works ok on NULL too */ return -(i & GAIH_EAI); } if (end) -- 2.42.0

1 year

Problem with static linking an vDSO

by Ramin Moussavi

I would like to extend the functions that can be utilized from the vDSO to check for potential issues with combinations of config, architecture, kernel, and gcc. I've created GitHub workflows for this purpose at https://github.com/lordrasmus/uclibc-ng. Currently, the kvx port has shown the most success with the highest number of passed tests. I encountered an issue where busybox, when statically linked, fails with vDSO support. The problem lies in _dl__vdso_gettimeofday, which is present in ld-uClibc_so.a but not in libc.a. It seems that busybox cannot utilize ld-uClibc_so.a because it's not installed into the sysroot. I'm seeking suggestions on how to resolve this issue. If anyone has ideas or solutions, please share them. Additionally, if there are any suggestions for improving my workflows, I would appreciate the input. I'm currently developing a tool to simplify the download of files such as configuration and compilers used in the workflow for local checking. This tool also integrates the ability to run tests on qemu. You can find it at https://github.com/lordrasmus/uclibc-ng-dev.

1 year

[PATCH] rlimit: fix 64-bit RLIM64_INFINITY macro

by Pavel Kozlov

From: Pavel Kozlov <pavel.kozlov(a)synopsys.com> Linux kernel returns -1ULL as RLIM64_INFINITY for all cpus. Fix RLIM64_INFINTIY and 64-bit variant of RLIM_INFINITY macro for sparc, mips, alpha, as for these CPUs the library uses different value than what the kernel sets and it can cause incorrect RLIM64_INFINTY check. Because alpha is a 64-bit arch, fix the RLIM_INFINITY macro twice (the value should be the same with and without __USE_FILE_OFFSET64 definition) to match the prlimit64 syscall in the kernel. Previous implementation of setrlimit/getrlimit functions didn't use prlimit64 syscall and didn't receive RLIM64_INFINTIY from the kernel, RLIM64_INFINTY macro was used by the library itself to mimic the 64-bit rlimit in the getrlimit64/setrlimit64 functions, that allowed to have RLIM64_INFINTIY different from what the kernel sets. New implementation of setrlimit/getrlimit uses prlimit64 and checks for RLIM64_INFINITY value and must have equal RLIM64_INFINITY definition with what the kernel uses. This issue is indicated by the tst-rlim/tst-rlim64 tests on sparc/mips32/alpha, tests return 23 (UNSUPPORTED) because of incorrect RLIM_INFINTY check for available rlimit type. This patch will require rebuild of sparc/mips32/alpha binaries that explicitly use RLIM64_INFINTY or 64-bit variant of RLIM_INFINITY (if binary for 32-bit CPU was built with _FILE_OFFSET_BITS=64) to update the macro value. Signed-off-by: Pavel Kozlov <pavel.kozlov(a)synopsys.com> --- libc/sysdeps/linux/alpha/bits/resource.h | 6 +++--- libc/sysdeps/linux/mips/bits/resource.h | 4 ++-- libc/sysdeps/linux/sparc/bits/resource.h | 4 ++-- libc/sysdeps/linux/sparc64/bits/resource.h | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-) diff --git a/libc/sysdeps/linux/alpha/bits/resource.h b/libc/sysdeps/linux/alpha/bits/resource.h index 38f73961e99d..dba818714d84 100644 --- a/libc/sysdeps/linux/alpha/bits/resource.h +++ b/libc/sysdeps/linux/alpha/bits/resource.h @@ -113,13 +113,13 @@ enum __rlimit_resource /* Value to indicate that there is no limit. */ #ifndef __USE_FILE_OFFSET64 -# define RLIM_INFINITY ((long int)(~0UL >> 1)) +# define RLIM_INFINITY ((unsigned long int)(~0UL)) #else -# define RLIM_INFINITY 0x7fffffffffffffffLL +# define RLIM_INFINITY 0xffffffffffffffffULL #endif #ifdef __USE_LARGEFILE64 -# define RLIM64_INFINITY 0x7fffffffffffffffLL +# define RLIM64_INFINITY 0xffffffffffffffffULL #endif /* We can represent all limits. */ diff --git a/libc/sysdeps/linux/mips/bits/resource.h b/libc/sysdeps/linux/mips/bits/resource.h index 5690527bf9a3..97487d274f21 100644 --- a/libc/sysdeps/linux/mips/bits/resource.h +++ b/libc/sysdeps/linux/mips/bits/resource.h @@ -123,10 +123,10 @@ enum __rlimit_resource # ifndef __USE_FILE_OFFSET64 # define RLIM_INFINITY ((long int)(~0UL >> 1)) # else -# define RLIM_INFINITY 0x7fffffffffffffffULL +# define RLIM_INFINITY 0xffffffffffffffffULL # endif # ifdef __USE_LARGEFILE64 -# define RLIM64_INFINITY 0x7fffffffffffffffULL +# define RLIM64_INFINITY 0xffffffffffffffffULL # endif #endif diff --git a/libc/sysdeps/linux/sparc/bits/resource.h b/libc/sysdeps/linux/sparc/bits/resource.h index a5ec31e4e677..48e1049f41a6 100644 --- a/libc/sysdeps/linux/sparc/bits/resource.h +++ b/libc/sysdeps/linux/sparc/bits/resource.h @@ -114,11 +114,11 @@ enum __rlimit_resource #ifndef __USE_FILE_OFFSET64 # define RLIM_INFINITY ((long int)(~0UL >> 1)) #else -# define RLIM_INFINITY 0x7fffffffffffffffLL +# define RLIM_INFINITY 0xffffffffffffffffULL #endif #ifdef __USE_LARGEFILE64 -# define RLIM64_INFINITY 0x7fffffffffffffffLL +# define RLIM64_INFINITY 0xffffffffffffffffULL #endif /* We can represent all limits. */ diff --git a/libc/sysdeps/linux/sparc64/bits/resource.h b/libc/sysdeps/linux/sparc64/bits/resource.h index f1e11e239602..84c76878520d 100644 --- a/libc/sysdeps/linux/sparc64/bits/resource.h +++ b/libc/sysdeps/linux/sparc64/bits/resource.h @@ -128,11 +128,11 @@ enum __rlimit_resource #ifndef __USE_FILE_OFFSET64 # define RLIM_INFINITY ((long int)(~0UL >> 1)) #else -# define RLIM_INFINITY 0x7fffffffffffffffLL +# define RLIM_INFINITY 0xffffffffffffffffULL #endif #ifdef __USE_LARGEFILE64 -# define RLIM64_INFINITY 0x7fffffffffffffffLL +# define RLIM64_INFINITY 0xffffffffffffffffULL #endif #endif -- 2.25.1

1 year

← Newer
1
...
9
10
11
12
13
14
15
...
113
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

devel