devel

devel@uclibc-ng.org

3 participants
1149 discussions

problem with stack protection, threads and static binaries

by Daniel Fahlgren

Hi, I'm experiencing problems with uClibc-ng when creating static binaries that uses threads. I originally reported this to the buildroot mailing list but got redirected here instead. The problem is when using a combination of stack protection, threads and static binaries. The program will during start up get a sigsegv in __pthread_initialize_minimal_internal(), and gdb says the instruction is a mov %fs:0x28,%rax where %fs is 0x00. The reason for that is that the pthread library is compiled with stack protection but __pthread_initialize_minimal_internal is called before __libc_setup_tls in static binaries. I have created an ugly patch to verify my hypothesis (attached). With that patch the test program works, but what is the proper way to solve this issue? With uClibc 0.9.33.x the same thing happens. With glibc the program works. Best regards, Daniel Fahlgren

9 years, 5 months

uClibc-ng - small C library for embedded systems branch master updated. fc3d5dc9840b02e73a189fc4f830dd5ef76f8b75

by wbx＠helium.waldemar-brodkorb.de

9 years, 5 months

[PATCH] xtensa: support call0 ABI

by Max Filippov

Most changes are mechanical replacement of 'retw' instruction with 'abi_ret' macro, defined to 'retw' or 'ret' according to ABI. Assembly code that makes calls is duplicated for call0 ABI with changed register numbers for parameters/return value and call instruction. 'entry' instructions are replaced with 'abi_entry' macro. More interesting changes: - non-leaf assembly functions (e.g. _dl_tlsdesc_dynamic, _dl_linux_resolve, SYSCALL_ERROR_HANDLER, PSEUDO) now need to preserve registers around intermediate calls they make, use temporary stack frame for that; - setjmp/longjmp only need to save and restore return address, stack pointer and callee-saved registers in the jmpbuf; - __clone and syscall functions had hardcoded offsets to parameter passed on stack, on call0 ABI they don't need stack frame, so the offset is different. Replace these offsets with FRAMESIZE macro. Signed-off-by: Max Filippov <jcmvbkbc(a)gmail.com> --- ldso/ldso/xtensa/dl-startup.h | 12 ++++ ldso/ldso/xtensa/dl-tlsdesc.S | 45 ++++++++------- ldso/ldso/xtensa/resolve.S | 35 ++++++++++++ libc/string/xtensa/memcpy.S | 16 +++--- libc/string/xtensa/memset.S | 4 +- libc/string/xtensa/strcmp.S | 20 +++---- libc/string/xtensa/strcpy.S | 12 ++-- libc/string/xtensa/strlen.S | 8 +-- libc/string/xtensa/strncpy.S | 6 +- libc/sysdeps/linux/xtensa/__longjmp.S | 17 ++++++ libc/sysdeps/linux/xtensa/bits/setjmp.h | 9 +++ libc/sysdeps/linux/xtensa/clone.S | 21 +++++-- libc/sysdeps/linux/xtensa/crt1.S | 30 ++++++++++ libc/sysdeps/linux/xtensa/crti.S | 15 ++++- libc/sysdeps/linux/xtensa/crtn.S | 17 +++++- libc/sysdeps/linux/xtensa/mmap.S | 2 +- libc/sysdeps/linux/xtensa/setjmp.S | 17 ++++++ libc/sysdeps/linux/xtensa/syscall.S | 4 +- libc/sysdeps/linux/xtensa/sysdep.h | 45 +++++++++++++-- libc/sysdeps/linux/xtensa/vfork.S | 23 ++++++++ libc/sysdeps/linux/xtensa/windowspill.S | 3 + .../sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h | 64 ++++++++++++++++++++-- libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S | 14 ++--- .../nptl/sysdeps/xtensa/pthread_spin_trylock.S | 13 ++--- test/tls/tls-macros.h | 27 +++++++++ 25 files changed, 388 insertions(+), 91 deletions(-) diff --git a/ldso/ldso/xtensa/dl-startup.h b/ldso/ldso/xtensa/dl-startup.h index 8fe54a3..aece0cd 100644 --- a/ldso/ldso/xtensa/dl-startup.h +++ b/ldso/ldso/xtensa/dl-startup.h @@ -23,6 +23,7 @@ __asm__ ( " .align 4\n" "0: movi a3, _start+3\n" " sub a2, a0, a3\n" +#if defined(__XTENSA_WINDOWED_ABI__) " # Make sure a0 is cleared to mark the top of stack.\n" " movi a0, 0\n" " # user_entry_point = _dl_start(pointer to argument block)\n" @@ -32,6 +33,17 @@ __asm__ ( " callx4 a4\n" " # Save user_entry_point so we can jump to it.\n" " mov a3, a6\n" +#elif defined(__XTENSA_CALL0_ABI__) + " # user_entry_point = _dl_start(pointer to argument block)\n" + " movi a0, _dl_start\n" + " add a0, a0, a2\n" + " mov a2, sp\n" + " callx0 a0\n" + " # Save user_entry_point so we can jump to it.\n" + " mov a3, a2\n" +#else +#error Unsupported Xtensa ABI +#endif " l32i a7, sp, 0 # load argc\n" " # Load _dl_skip_args into a4.\n" " movi a4, _dl_skip_args\n" diff --git a/ldso/ldso/xtensa/dl-tlsdesc.S b/ldso/ldso/xtensa/dl-tlsdesc.S index 0638af4..6f417f6 100644 --- a/ldso/ldso/xtensa/dl-tlsdesc.S +++ b/ldso/ldso/xtensa/dl-tlsdesc.S @@ -23,16 +23,11 @@ #include "tlsdesc.h" .text - .align 4 - .hidden _dl_tlsdesc_return - .global _dl_tlsdesc_return - .type _dl_tlsdesc_return, @function -_dl_tlsdesc_return: - entry a1, 16 +HIDDEN_ENTRY (_dl_tlsdesc_return) rur.threadptr a3 add a2, a2, a3 - retw - .size _dl_tlsdesc_return, .-_dl_tlsdesc_return + abi_ret +END (_dl_tlsdesc_return) #ifdef SHARED @@ -57,12 +52,7 @@ _dl_tlsdesc_return: } */ - .align 4 - .hidden _dl_tlsdesc_dynamic - .global _dl_tlsdesc_dynamic - .type _dl_tlsdesc_dynamic, @function -_dl_tlsdesc_dynamic: - entry a1, 32 +HIDDEN_ENTRY (_dl_tlsdesc_dynamic) /* dtv_t *dtv = (dtv_t *)THREAD_DTV(); */ rur.threadptr a3 @@ -83,16 +73,31 @@ _dl_tlsdesc_dynamic: + td->tlsinfo.ti_offset - __builtin_thread_pointer(); */ l32i a6, a2, TLSDESC_MODOFF sub a2, a6, a3 - retw + abi_ret /* return __tls_get_addr (&td->tlsinfo) - __builtin_thread_pointer(); */ .Lslow: - mov a10, a2 - movi a8, __tls_get_addr - callx8 a8 - sub a2, a10, a3 +#if defined(__XTENSA_WINDOWED_ABI__) + mov a6, a2 + movi a4, __tls_get_addr + callx4 a4 + sub a2, a6, a3 retw - .size _dl_tlsdesc_dynamic, .-_dl_tlsdesc_dynamic +#elif defined(__XTENSA_CALL0_ABI__) + addi a1, a1, -16 + s32i a0, a1, 0 + s32i a3, a1, 4 + movi a0, __tls_get_addr + callx0 a0 + l32i a3, a1, 4 + l32i a0, a1, 0 + sub a2, a2, a3 + addi a1, a1, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif +END (_dl_tlsdesc_dynamic) #endif /* SHARED */ #endif diff --git a/ldso/ldso/xtensa/resolve.S b/ldso/ldso/xtensa/resolve.S index 8061af2..12a554d 100644 --- a/ldso/ldso/xtensa/resolve.S +++ b/ldso/ldso/xtensa/resolve.S @@ -31,6 +31,7 @@ .global _dl_linux_resolve .type _dl_linux_resolve, @function _dl_linux_resolve: +#if defined(__XTENSA_WINDOWED_ABI__) /* Call the fixup function. */ movi a8, _dl_linux_resolver callx8 a8 @@ -47,4 +48,38 @@ _dl_linux_resolve: /* Jump to the next instruction past the ENTRY. */ addi a10, a10, 3 jx a10 +#elif defined(__XTENSA_CALL0_ABI__) + /* Reserve stack space and save incoming arguments. */ + addi a1, a1, -32 + s32i a0, a1, 0 + s32i a2, a1, 8 + s32i a3, a1, 12 + s32i a4, a1, 16 + s32i a5, a1, 20 + s32i a6, a1, 24 + s32i a7, a1, 28 + + /* Move arguments for the _dl_linux_resolver to proper registers. */ + mov a2, a10 + mov a3, a11 + /* Call the fixup function. */ + movi a0, _dl_linux_resolver + callx0 a0 + mov a10, a2 + + /* Restore incoming arguments from stack and deallocate reservation. */ + l32i a0, a1, 0 + l32i a2, a1, 8 + l32i a3, a1, 12 + l32i a4, a1, 16 + l32i a5, a1, 20 + l32i a6, a1, 24 + l32i a7, a1, 28 + addi a1, a1, 32 + + /* Jump to the target function. */ + jx a10 +#else +#error Unsupported Xtensa ABI +#endif .size _dl_linux_resolve, . - _dl_linux_resolve diff --git a/libc/string/xtensa/memcpy.S b/libc/string/xtensa/memcpy.S index 2b23b41..2442056 100644 --- a/libc/string/xtensa/memcpy.S +++ b/libc/string/xtensa/memcpy.S @@ -91,7 +91,7 @@ __memcpy_aux: #if !XCHAL_HAVE_LOOPS blt a3, a7, 1b #endif -2: retw +2: abi_ret /* Destination is unaligned. */ @@ -181,7 +181,7 @@ ENTRY (memcpy) 3: bbsi.l a4, 2, 4f bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 4 bytes. */ 4: l32i a6, a3, 0 @@ -190,7 +190,7 @@ ENTRY (memcpy) addi a5, a5, 4 bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 2 bytes. */ 5: l16ui a6, a3, 0 @@ -198,14 +198,14 @@ ENTRY (memcpy) s16i a6, a5, 0 addi a5, a5, 2 bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 1 byte. */ 6: l8ui a6, a3, 0 s8i a6, a5, 0 .Ldone: - retw + abi_ret /* Destination is aligned; source is unaligned. */ @@ -276,7 +276,7 @@ ENTRY (memcpy) #endif bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 2 bytes. */ 5: l8ui a6, a3, 0 @@ -286,11 +286,11 @@ ENTRY (memcpy) s8i a7, a5, 1 addi a5, a5, 2 bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 1 byte. */ 6: l8ui a6, a3, 0 s8i a6, a5, 0 - retw + abi_ret libc_hidden_def (memcpy) diff --git a/libc/string/xtensa/memset.S b/libc/string/xtensa/memset.S index 435d6de..20bf14c 100644 --- a/libc/string/xtensa/memset.S +++ b/libc/string/xtensa/memset.S @@ -63,7 +63,7 @@ __memset_aux: #if !XCHAL_HAVE_LOOPS blt a5, a6, 1b #endif -2: retw +2: abi_ret /* Destination is unaligned. */ @@ -159,6 +159,6 @@ ENTRY (memset) /* Set 1 byte. */ s8i a3, a5, 0 -6: retw +6: abi_ret libc_hidden_def (memset) diff --git a/libc/string/xtensa/strcmp.S b/libc/string/xtensa/strcmp.S index 8ed1ed0..2dce590 100644 --- a/libc/string/xtensa/strcmp.S +++ b/libc/string/xtensa/strcmp.S @@ -108,7 +108,7 @@ ENTRY (strcmp) #endif .Lretdiff: sub a2, a8, a9 - retw + abi_ret /* s1 is word-aligned; s2 is word-aligned. @@ -229,7 +229,7 @@ ENTRY (strcmp) /* Words are equal; some byte is zero. */ .Leq: movi a2, 0 /* return equal */ - retw + abi_ret .Lwne2: /* Words are not equal. On big-endian processors, if none of the bytes are zero, the return value can be determined by a simple @@ -239,10 +239,10 @@ ENTRY (strcmp) bnall a10, a7, .Lsomezero bgeu a8, a9, .Lposreturn movi a2, -1 - retw + abi_ret .Lposreturn: movi a2, 1 - retw + abi_ret .Lsomezero: /* There is probably some zero byte. */ #endif /* __XTENSA_EB__ */ .Lwne: /* Words are not equal. */ @@ -263,14 +263,14 @@ ENTRY (strcmp) byte. Just subtract words to get the return value. The high order equal bytes cancel, leaving room for the sign. */ sub a2, a8, a9 - retw + abi_ret .Ldiff0: /* Need to make room for the sign, so can't subtract whole words. */ extui a10, a8, 24, 8 extui a11, a9, 24, 8 sub a2, a10, a11 - retw + abi_ret #else /* !__XTENSA_EB__ */ /* Little-endian is a little more difficult because can't subtract @@ -281,28 +281,28 @@ ENTRY (strcmp) extui a10, a8, 24, 8 extui a11, a9, 24, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff0: /* Byte 0 is different. */ extui a10, a8, 0, 8 extui a11, a9, 0, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff1: /* Byte 0 is equal; byte 1 is different. */ extui a10, a8, 8, 8 extui a11, a9, 8, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff2: /* Bytes 0-1 are equal; byte 2 is different. */ extui a10, a8, 16, 8 extui a11, a9, 16, 8 sub a2, a10, a11 - retw + abi_ret #endif /* !__XTENSA_EB */ diff --git a/libc/string/xtensa/strcpy.S b/libc/string/xtensa/strcpy.S index f9f5868..9f42b34 100644 --- a/libc/string/xtensa/strcpy.S +++ b/libc/string/xtensa/strcpy.S @@ -68,7 +68,7 @@ ENTRY (strcpy) s8i a8, a10, 1 /* store byte 0 */ addi a10, a10, 2 /* advance dst pointer */ bnez a8, .Lsrcaligned -1: retw +1: abi_ret /* dst is word-aligned; src is word-aligned. */ @@ -102,21 +102,21 @@ ENTRY (strcpy) #endif /* !XCHAL_HAVE_LOOPS */ .Lz3: /* Byte 3 is zero. */ - retw + abi_ret .Lz0: /* Byte 0 is zero. */ #ifdef __XTENSA_EB__ movi a8, 0 #endif s8i a8, a10, 0 - retw + abi_ret .Lz1: /* Byte 1 is zero. */ #ifdef __XTENSA_EB__ extui a8, a8, 16, 16 #endif s16i a8, a10, 0 - retw + abi_ret .Lz2: /* Byte 2 is zero. */ #ifdef __XTENSA_EB__ @@ -125,7 +125,7 @@ ENTRY (strcpy) s16i a8, a10, 0 movi a8, 0 s8i a8, a10, 2 - retw + abi_ret .align 4 /* (2 mod 4) alignment for loop instruction */ @@ -144,6 +144,6 @@ ENTRY (strcpy) #else bnez a8, 1b #endif -2: retw +2: abi_ret libc_hidden_def (strcpy) diff --git a/libc/string/xtensa/strlen.S b/libc/string/xtensa/strlen.S index 86fe113..e1c98c8 100644 --- a/libc/string/xtensa/strlen.S +++ b/libc/string/xtensa/strlen.S @@ -59,7 +59,7 @@ ENTRY (strlen) /* Byte 3 is zero. */ addi a3, a3, 3 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret /* String is word-aligned. */ @@ -88,16 +88,16 @@ ENTRY (strlen) .Lz0: /* Byte 0 is zero. */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret .Lz1: /* Byte 1 is zero. */ addi a3, a3, 1 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret .Lz2: /* Byte 2 is zero. */ addi a3, a3, 2 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret libc_hidden_def (strlen) diff --git a/libc/string/xtensa/strncpy.S b/libc/string/xtensa/strncpy.S index 115d44c..aa8db5d 100644 --- a/libc/string/xtensa/strncpy.S +++ b/libc/string/xtensa/strncpy.S @@ -67,7 +67,7 @@ __strncpy_aux: j .Lfill .Lret: - retw + abi_ret ENTRY (strncpy) @@ -129,7 +129,7 @@ ENTRY (strncpy) addi a10, a10, 1 bnez a4, .Lfillcleanup -2: retw +2: abi_ret .Lfill1mod2: /* dst address is odd */ s8i a9, a10, 0 /* store byte 0 */ @@ -235,6 +235,6 @@ ENTRY (strncpy) #endif 2: j .Lfill -3: retw +3: abi_ret libc_hidden_def (strncpy) diff --git a/libc/sysdeps/linux/xtensa/__longjmp.S b/libc/sysdeps/linux/xtensa/__longjmp.S index 4d55906..acc0b4f 100644 --- a/libc/sysdeps/linux/xtensa/__longjmp.S +++ b/libc/sysdeps/linux/xtensa/__longjmp.S @@ -48,6 +48,7 @@ ENTRY (__longjmp) +#if defined(__XTENSA_WINDOWED_ABI__) /* Invalidate all but the current window. Reading and writing special registers WINDOWBASE and WINDOWSTART are privileged operations, so user processes must call the @@ -120,6 +121,22 @@ ENTRY (__longjmp) movnez a2, a3, a3 retw +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, a2, 0 + l32i a1, a2, 4 + l32i a12, a2, 8 + l32i a13, a2, 12 + l32i a14, a2, 16 + l32i a15, a2, 20 + + /* Return v ? v : 1. */ + movi a2, 1 + movnez a2, a3, a3 + + ret +#else +#error Unsupported Xtensa ABI +#endif END (__longjmp) libc_hidden_def (__longjmp) diff --git a/libc/sysdeps/linux/xtensa/bits/setjmp.h b/libc/sysdeps/linux/xtensa/bits/setjmp.h index 183fa3e..5d3e550 100644 --- a/libc/sysdeps/linux/xtensa/bits/setjmp.h +++ b/libc/sysdeps/linux/xtensa/bits/setjmp.h @@ -23,6 +23,7 @@ # error "Never include <bits/setjmp.h> directly; use <setjmp.h> instead." #endif +#if defined(__XTENSA_WINDOWED_ABI__) /* The jmp_buf structure for Xtensa holds the following (where "proc" is the procedure that calls setjmp): 4-12 registers from the window of proc, the 4 words from the save area at proc's $sp (in case a @@ -30,5 +31,13 @@ proc. Everything else is saved on the stack in the normal save areas. */ typedef int __jmp_buf[17]; +#elif defined(__XTENSA_CALL0_ABI__) +/* The jmp_buf structure for Xtensa Call0 ABI holds the return address, + the stack pointer and callee-saved registers (a12 - a15). */ + +typedef int __jmp_buf[6]; +#else +#error Unsupported Xtensa ABI +#endif #endif /* bits/setjmp.h */ diff --git a/libc/sysdeps/linux/xtensa/clone.S b/libc/sysdeps/linux/xtensa/clone.S index 34d68a8..88cd6c1 100644 --- a/libc/sysdeps/linux/xtensa/clone.S +++ b/libc/sysdeps/linux/xtensa/clone.S @@ -51,7 +51,7 @@ ENTRY (__clone) mov a8, a6 /* use a8 as a temp */ mov a6, a4 mov a4, a8 - l32i a8, a1, 16 /* child_tid */ + l32i a8, a1, FRAMESIZE /* child_tid */ movi a2, SYS_ify(clone) /* syscall(NR_clone,clone_flags, usp, parent_tid, child_tls, child_tid) @@ -65,7 +65,7 @@ ENTRY (__clone) /* fall through for parent */ .Lpseudo_end: - retw + abi_ret .Leinval: movi a2, -EINVAL @@ -94,17 +94,26 @@ ENTRY (__clone) /* start child thread */ movi a0, 0 /* terminate the stack frame */ + +#if defined(__XTENSA_WINDOWED_ABI__) mov a6, a9 /* load up the 'arg' parameter */ callx4 a7 /* call the user's function */ /* Call _exit. Note that any return parameter from the user's function in a6 is seen as inputs to _exit. */ -#ifdef PIC - movi a2, _exit@PLT + movi a2, JUMPTARGET(_exit) + callx4 a2 +#elif defined(__XTENSA_CALL0_ABI__) + mov a2, a9 /* load up the 'arg' parameter */ + callx0 a7 /* call the user's function */ + + /* Call _exit. Note that any return parameter from the user's + function in a2 is seen as inputs to _exit. */ + movi a0, JUMPTARGET(_exit) + callx0 a0 #else - movi a2, _exit +#error Unsupported Xtensa ABI #endif - callx4 a2 PSEUDO_END (__clone) diff --git a/libc/sysdeps/linux/xtensa/crt1.S b/libc/sysdeps/linux/xtensa/crt1.S index 025ebd0..efbe264 100644 --- a/libc/sysdeps/linux/xtensa/crt1.S +++ b/libc/sysdeps/linux/xtensa/crt1.S @@ -76,6 +76,7 @@ .global _start .type _start, @function _start: +#if defined(__XTENSA_WINDOWED_ABI__) /* Clear a0 to obviously mark the outermost frame. */ movi a0, 0 @@ -104,6 +105,35 @@ _start: But let the libc call main. */ movi a4, __uClibc_main callx4 a4 +#elif defined(__XTENSA_CALL0_ABI__) + /* Setup the shared library termination function. */ + mov a7, a2 + + /* Load up the user's main function. */ + movi a2, main + + /* Extract the arguments as encoded on the stack and set up + the arguments for `main': argc, argv. envp will be determined + later in __uClibc_main. */ + l32i a3, a1, 0 /* Load the argument count. */ + addi a4, a1, 4 /* Compute the argv pointer. */ + + /* Push address of our own entry points to .fini and .init. */ + movi a5, _init + movi a6, _fini + + /* Provide the highest stack address to the user code (for stacks + which grow downwards). Note that we destroy the stack version + of argc here. */ + s32i a1, a1, 0 + + /* Call the user's main function, and exit with its value. + But let the libc call main. */ + movi a0, __uClibc_main + callx0 a0 +#else +#error Unsupported Xtensa ABI +#endif /* Crash if somehow `exit' does return. */ ill diff --git a/libc/sysdeps/linux/xtensa/crti.S b/libc/sysdeps/linux/xtensa/crti.S index a01c02c..ba804eb 100644 --- a/libc/sysdeps/linux/xtensa/crti.S +++ b/libc/sysdeps/linux/xtensa/crti.S @@ -5,12 +5,25 @@ .global _init .type _init, @function _init: +#if defined(__XTENSA_WINDOWED_ABI__) entry sp, 48 - +#elif defined(__XTENSA_CALL0_ABI__) + addi sp, sp, -16 + s32i a0, sp, 0 +#else +#error Unsupported Xtensa ABI +#endif .section .fini .align 4 .global _fini .type _fini, @function _fini: +#if defined(__XTENSA_WINDOWED_ABI__) entry sp, 48 +#elif defined(__XTENSA_CALL0_ABI__) + addi sp, sp, -16 + s32i a0, sp, 0 +#else +#error Unsupported Xtensa ABI +#endif diff --git a/libc/sysdeps/linux/xtensa/crtn.S b/libc/sysdeps/linux/xtensa/crtn.S index ab1a489..a3598da 100644 --- a/libc/sysdeps/linux/xtensa/crtn.S +++ b/libc/sysdeps/linux/xtensa/crtn.S @@ -1,8 +1,23 @@ /* glibc's sysdeps/xtensa/elf/initfini.c used for reference [EPILOG] */ .section .init +#if defined(__XTENSA_WINDOWED_ABI__) retw - +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, sp, 0 + addi sp, sp, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif .section .fini +#if defined(__XTENSA_WINDOWED_ABI__) retw +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, sp, 0 + addi sp, sp, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif diff --git a/libc/sysdeps/linux/xtensa/mmap.S b/libc/sysdeps/linux/xtensa/mmap.S index c05036a..b4dd7c5 100644 --- a/libc/sysdeps/linux/xtensa/mmap.S +++ b/libc/sysdeps/linux/xtensa/mmap.S @@ -48,7 +48,7 @@ ENTRY (__mmap) bltz a2, SYSCALL_ERROR_LABEL .Lpseudo_end: - retw + abi_ret PSEUDO_END (__mmap) diff --git a/libc/sysdeps/linux/xtensa/setjmp.S b/libc/sysdeps/linux/xtensa/setjmp.S index bf46912..862bf67 100644 --- a/libc/sysdeps/linux/xtensa/setjmp.S +++ b/libc/sysdeps/linux/xtensa/setjmp.S @@ -88,6 +88,7 @@ END (setjmp) ENTRY (__sigsetjmp) 1: +#if defined(__XTENSA_WINDOWED_ABI__) /* Flush registers. */ movi a4, __window_spill callx4 a4 @@ -146,6 +147,22 @@ ENTRY (__sigsetjmp) callx4 a3 mov a2, a6 retw +#elif defined(__XTENSA_CALL0_ABI__) + s32i a0, a2, 0 + s32i a1, a2, 4 + s32i a12, a2, 8 + s32i a13, a2, 12 + s32i a14, a2, 16 + s32i a15, a2, 20 + mov a12, a2 + movi a0, __sigjmp_save + callx0 a0 + l32i a0, a12, 0 + l32i a12, a12, 8 + ret +#else +#error Unsupported Xtensa ABI +#endif END(__sigsetjmp) weak_extern(_setjmp) diff --git a/libc/sysdeps/linux/xtensa/syscall.S b/libc/sysdeps/linux/xtensa/syscall.S index 0e1a5d0..790a8d0 100644 --- a/libc/sysdeps/linux/xtensa/syscall.S +++ b/libc/sysdeps/linux/xtensa/syscall.S @@ -26,7 +26,7 @@ */ ENTRY (syscall) - l32i a9, a1, 16 /* load extra argument from stack */ + l32i a9, a1, FRAMESIZE/* load extra argument from stack */ mov a8, a7 mov a7, a3 /* preserve a3 in a7 */ mov a3, a4 @@ -37,5 +37,5 @@ ENTRY (syscall) movi a4, -4095 bgeu a2, a4, SYSCALL_ERROR_LABEL .Lpseudo_end: - retw + abi_ret PSEUDO_END (syscall) diff --git a/libc/sysdeps/linux/xtensa/sysdep.h b/libc/sysdeps/linux/xtensa/sysdep.h index 4873a41..ce2b0a0 100644 --- a/libc/sysdeps/linux/xtensa/sysdep.h +++ b/libc/sysdeps/linux/xtensa/sysdep.h @@ -28,13 +28,24 @@ #define ASM_TYPE_DIRECTIVE(name, typearg) .type name, typearg #define ASM_SIZE_DIRECTIVE(name) .size name, . - name +#if defined(__XTENSA_WINDOWED_ABI__) +#define abi_entry(reg, frame_size) entry reg, frame_size +#define abi_ret retw +#elif defined(__XTENSA_CALL0_ABI__) +#define abi_entry(reg, frame_size) +#define abi_ret ret +#else +#error Unsupported Xtensa ABI +#endif + + #define ENTRY(name) \ ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME(name); \ ASM_TYPE_DIRECTIVE (C_SYMBOL_NAME(name), @function); \ .align ALIGNARG(2); \ LITERAL_POSITION; \ C_LABEL(name) \ - entry sp, FRAMESIZE; \ + abi_entry(sp, FRAMESIZE); \ CALL_MCOUNT #define HIDDEN_ENTRY(name) \ @@ -44,7 +55,7 @@ .align ALIGNARG(2); \ LITERAL_POSITION; \ C_LABEL(name) \ - entry sp, FRAMESIZE; \ + abi_entry(sp, FRAMESIZE); \ CALL_MCOUNT #undef END @@ -73,7 +84,13 @@ #endif #ifndef FRAMESIZE +#if defined(__XTENSA_WINDOWED_ABI__) #define FRAMESIZE 16 +#elif defined(__XTENSA_CALL0_ABI__) +#define FRAMESIZE 0 +#else +#error Unsupported Xtensa ABI +#endif #endif #define CALL_MCOUNT /* Do nothing. */ @@ -118,7 +135,7 @@ END (name) #undef ret_NOERRNO -#define ret_NOERRNO retw +#define ret_NOERRNO abi_ret /* The function has to return the error code. */ #undef PSEUDO_ERRVAL @@ -133,7 +150,7 @@ END (name) #undef ret_ERRVAL -#define ret_ERRVAL retw +#define ret_ERRVAL abi_ret #if defined _LIBC_REENTRANT # if defined USE___THREAD @@ -151,6 +168,8 @@ movi a2, -1; \ j .Lpseudo_end; # else /* !USE___THREAD */ + +#if defined(__XTENSA_WINDOWED_ABI__) # define SYSCALL_ERROR_HANDLER \ 0: neg a2, a2; \ mov a6, a2; \ @@ -159,6 +178,24 @@ s32i a2, a6, 0; \ movi a2, -1; \ j .Lpseudo_end; +#elif defined(__XTENSA_CALL0_ABI__) +# define SYSCALL_ERROR_HANDLER \ +0: neg a2, a2; \ + addi a1, a1, -16; \ + s32i a0, a1, 0; \ + s32i a2, a1, 4; \ + movi a0, __errno_location@PLT; \ + callx0 a0; \ + l32i a0, a1, 0; \ + l32i a3, a1, 4; \ + addi a1, a1, 16; \ + s32i a3, a2, 0; \ + movi a2, -1; \ + j .Lpseudo_end; +#else +#error Unsupported Xtensa ABI +#endif + # endif /* !USE___THREAD */ #else /* !_LIBC_REENTRANT */ #define SYSCALL_ERROR_HANDLER \ diff --git a/libc/sysdeps/linux/xtensa/vfork.S b/libc/sysdeps/linux/xtensa/vfork.S index 6aced0a..b8db5c1 100644 --- a/libc/sysdeps/linux/xtensa/vfork.S +++ b/libc/sysdeps/linux/xtensa/vfork.S @@ -51,6 +51,8 @@ HIDDEN_ENTRY (__vfork) + +#if defined(__XTENSA_WINDOWED_ABI__) .literal .Ljumptable, 0, .L4, .L8, .L12 mov a3, a0 # move return address out of the way @@ -163,6 +165,27 @@ HIDDEN_ENTRY (__vfork) PSEUDO_END (__vfork) .Lpseudo_end: retw +#elif defined(__XTENSA_CALL0_ABI__) + SAVE_PID(a5, a8, a3, a4) + + /* Use syscall 'clone'. Set new stack pointer to the same address. */ + movi a2, SYS_ify (clone) + movi a3, 0 + movi a6, CLONE_VM | CLONE_VFORK | SIGCHLD + syscall + + RESTORE_PID(a5, a8, a2) + + movi a3, -4096 + bgeu a2, a3, 1f + ret +1: + PSEUDO_END (__vfork) +.Lpseudo_end: + ret +#else +#error Unsupported Xtensa ABI +#endif weak_alias (__vfork, vfork) libc_hidden_def(vfork) diff --git a/libc/sysdeps/linux/xtensa/windowspill.S b/libc/sysdeps/linux/xtensa/windowspill.S index 4167b28..0130256 100644 --- a/libc/sysdeps/linux/xtensa/windowspill.S +++ b/libc/sysdeps/linux/xtensa/windowspill.S @@ -18,6 +18,7 @@ #include <bits/xtensa-config.h> +#ifdef __XTENSA_WINDOWED_ABI__ .text .align 4 .literal_position @@ -93,3 +94,5 @@ __window_spill: #endif #endif retw + +#endif diff --git a/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h b/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h index f82957d..02fe278 100644 --- a/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h +++ b/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h @@ -25,6 +25,7 @@ #if !defined NOT_IN_libc || defined IS_IN_libpthread || defined IS_IN_librt +#if defined(__XTENSA_WINDOWED_ABI__) /* CENABLE/CDISABLE in PSEUDO below use call8, stack frame size must be * at least 32. */ @@ -58,6 +59,64 @@ j SYSCALL_ERROR_LABEL; \ .Lpseudo_end: +# define CENABLE movi a8, CENABLE_FUNC; \ + callx8 a8 +# define CDISABLE movi a8, CDISABLE_FUNC; \ + callx8 a8 +#elif defined(__XTENSA_CALL0_ABI__) + +# undef PSEUDO +# define PSEUDO(name, syscall_name, args) \ + .text; \ + ENTRY (name) \ + SINGLE_THREAD_P(a10); \ + bnez a10, .Lpseudo_cancel; \ + DO_CALL (syscall_name, args); \ + bgez a2, .Lpseudo_done; \ + movi a4, -4095; \ + blt a2, a4, .Lpseudo_done; \ + j SYSCALL_ERROR_LABEL; \ + .Lpseudo_done: \ + ret; \ + .Lpseudo_cancel: \ + addi a1, a1, -32; \ + /* The syscall args are in a2...a7; save them */ \ + s32i a0, a1, 0; \ + s32i a2, a1, 4; \ + s32i a3, a1, 8; \ + s32i a4, a1, 12; \ + s32i a5, a1, 16; \ + s32i a6, a1, 20; \ + s32i a7, a1, 24; \ + CENABLE; \ + /* Move return value to a10 preserved across the syscall */ \ + mov a10, a2; \ + l32i a2, a1, 4; \ + l32i a3, a1, 8; \ + l32i a4, a1, 12; \ + l32i a5, a1, 16; \ + l32i a6, a1, 20; \ + l32i a7, a1, 24; \ + DO_CALL (syscall_name, args); \ + s32i a2, a1, 4; \ + mov a2, a10; \ + CDISABLE; \ + l32i a2, a1, 4; \ + l32i a0, a1, 0; \ + addi a1, a1, 32; \ + bgez a2, .Lpseudo_end; \ + movi a4, -4095; \ + blt a2, a4, .Lpseudo_end; \ + j SYSCALL_ERROR_LABEL; \ + .Lpseudo_end: + +# define CENABLE movi a0, CENABLE_FUNC; \ + callx0 a0 +# define CDISABLE movi a0, CDISABLE_FUNC; \ + callx0 a0 +#else +#error Unsupported Xtensa ABI +#endif # ifdef IS_IN_libpthread # define CENABLE_FUNC __pthread_enable_asynccancel @@ -74,11 +133,6 @@ # error Unsupported library # endif -# define CENABLE movi a8, CENABLE_FUNC; \ - callx8 a8 -# define CDISABLE movi a8, CDISABLE_FUNC; \ - callx8 a8 - # if defined IS_IN_libpthread || !defined NOT_IN_libc # ifndef __ASSEMBLER__ extern int __local_multiple_threads attribute_hidden; diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S index 1e220a8..10b1c00 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S @@ -16,13 +16,10 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 - - .globl pthread_spin_lock -pthread_spin_lock: +#include <sysdep.h> - entry a1, 16 + .text +ENTRY (pthread_spin_lock) movi a3, 0 wsr a3, scompare1 @@ -31,7 +28,6 @@ pthread_spin_lock: bnez a3, 1b movi a2, 0 - retw + abi_ret - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +END (pthread_spin_lock) diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S b/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S index a736b01..4742bdb 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S +++ b/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S @@ -18,14 +18,10 @@ #define _ERRNO_H 1 #include <bits/errno.h> +#include <sysdep.h> .text - .align 4 - - .globl pthread_spin_trylock -pthread_spin_trylock: - - entry a1, 16 +ENTRY (pthread_spin_trylock) movi a3, 0 wsr a3, scompare1 @@ -34,7 +30,6 @@ pthread_spin_trylock: movi a2, EBUSY moveqz a2, a3, a3 - retw + abi_ret - .type pthread_spin_trylock, @function - .size pthread_spin_trylock, .-pthread_spin_trylock +END (pthread_spin_trylock) diff --git a/test/tls/tls-macros.h b/test/tls/tls-macros.h index 7d89274..315f0e2 100644 --- a/test/tls/tls-macros.h +++ b/test/tls/tls-macros.h @@ -887,6 +887,7 @@ register void *__gp __asm__("$29"); #elif defined __xtensa__ +#if defined(__XTENSA_WINDOWED_ABI__) #define TLS_GD(x) \ ({ int *__l; \ __asm__ ("movi a8, " #x "@TLSFUNC\n\t" \ @@ -909,6 +910,32 @@ register void *__gp __asm__("$29"); : \ : "a8", "a9", "a10", "a11", "a12", "a13", "a14", "a15"); \ __l; }) +#elif defined(__XTENSA_CALL0_ABI__) +#define TLS_GD(x) \ + ({ int *__l; \ + __asm__ ("movi a0, " #x "@TLSFUNC\n\t" \ + "movi a2, " #x "@TLSARG\n\t" \ + "callx0.tls a0, " #x "@TLSCALL\n\t" \ + "mov %0, a2\n\t" \ + : "=r" (__l) \ + : \ + : "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "a10", "a11");\ + __l; }) + +#define TLS_LD(x) \ + ({ int *__l; \ + __asm__ ("movi a0, _TLS_MODULE_BASE_@TLSFUNC\n\t" \ + "movi a2, _TLS_MODULE_BASE_@TLSARG\n\t" \ + "callx0.tls a0, _TLS_MODULE_BASE_@TLSCALL\n\t" \ + "movi %0, " #x "@TPOFF\n\t" \ + "add %0, %0, a2\n\t" \ + : "=r" (__l) \ + : \ + : "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "a10", "a11");\ + __l; }) +#else +#error Unsupported Xtensa ABI +#endif #define TLS_IE(x) TLS_LE(x) -- 1.8.1.4

9 years, 5 months

uClibc-ng - small C library for embedded systems branch 1.0 updated. v1.0.6-9-g4d8e548

by wbx＠helium.waldemar-brodkorb.de

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "uClibc-ng - small C library for embedded systems". The branch, 1.0 has been updated via 4d8e5484afb4978f672a8568ddd12e628fb02724 (commit) from e78a0f58f23347c822c182d1c01f6eb9b9866d60 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 4d8e5484afb4978f672a8568ddd12e628fb02724 Author: Waldemar Brodkorb <wbx(a)openadk.org> Date: Thu Oct 8 20:28:39 2015 +0200 add new architecture support for or1k Information about Openrisc: http://opencores.org/or1k/Main_Page Integrated from: https://github.com/openrisc/uClibc-or1k ----------------------------------------------------------------------- Summary of changes: extra/Configs/Config.in | 11 +- extra/Configs/Config.or1k | 35 ++ extra/Configs/defconfigs/or1k/defconfig | 245 +++++++++++ include/elf.h | 26 +- ldso/ldso/or1k/dl-debug.h | 53 +++ ldso/ldso/or1k/dl-startup.h | 106 +++++ ldso/ldso/{avr32 => or1k}/dl-syscalls.h | 0 ldso/ldso/or1k/dl-sysdep.h | 105 +++++ ldso/ldso/or1k/elfinterp.c | 333 +++++++++++++++ ldso/ldso/or1k/resolve.S | 54 +++ libc/sysdeps/linux/{alpha => or1k}/Makefile | 0 libc/sysdeps/linux/or1k/Makefile.arch | 9 + libc/sysdeps/linux/or1k/__init_brk.c | 28 ++ libc/sysdeps/linux/or1k/__longjmp.S | 81 ++++ libc/sysdeps/linux/or1k/__syscall_error.c | 30 ++ libc/sysdeps/linux/or1k/bits/endian.h | 25 ++ libc/sysdeps/linux/or1k/bits/fcntl.h | 236 +++++++++++ libc/sysdeps/linux/or1k/bits/kernel_stat.h | 59 +++ libc/sysdeps/linux/or1k/bits/kernel_types.h | 1 + libc/sysdeps/linux/or1k/bits/machine-gmon.h | 31 ++ libc/sysdeps/linux/or1k/bits/setjmp.h | 32 ++ libc/sysdeps/linux/or1k/bits/sigcontextinfo.h | 24 ++ libc/sysdeps/linux/or1k/bits/stackinfo.h | 28 ++ libc/sysdeps/linux/or1k/bits/syscalls.h | 101 +++++ .../sysdeps/linux/or1k/bits/uClibc_arch_features.h | 44 ++ libc/sysdeps/linux/or1k/bits/uClibc_page.h | 35 ++ libc/sysdeps/linux/{metag => or1k}/bits/wordsize.h | 0 libc/sysdeps/linux/or1k/brk.c | 23 ++ libc/sysdeps/linux/or1k/clone.c | 88 ++++ libc/sysdeps/linux/or1k/crt1.S | 144 +++++++ libc/sysdeps/linux/or1k/crti.S | 11 + libc/sysdeps/linux/or1k/crtn.S | 9 + libc/sysdeps/linux/or1k/jmpbuf-offsets.h | 8 + libc/sysdeps/linux/or1k/jmpbuf-unwind.h | 24 ++ libc/sysdeps/linux/or1k/sbrk.c | 27 ++ libc/sysdeps/linux/or1k/setjmp.S | 96 +++++ libc/sysdeps/linux/or1k/spr_defs.h | 429 ++++++++++++++++++++ libc/sysdeps/linux/or1k/sys/procfs.h | 116 ++++++ libc/sysdeps/linux/or1k/sys/ucontext.h | 26 ++ libpthread/linuxthreads/sysdeps/or1k/pt-machine.h | 55 +++ 40 files changed, 2786 insertions(+), 2 deletions(-) create mode 100644 extra/Configs/Config.or1k create mode 100644 extra/Configs/defconfigs/or1k/defconfig create mode 100644 ldso/ldso/or1k/dl-debug.h create mode 100644 ldso/ldso/or1k/dl-startup.h copy ldso/ldso/{avr32 => or1k}/dl-syscalls.h (100%) create mode 100644 ldso/ldso/or1k/dl-sysdep.h create mode 100644 ldso/ldso/or1k/elfinterp.c create mode 100644 ldso/ldso/or1k/resolve.S copy libc/sysdeps/linux/{alpha => or1k}/Makefile (100%) create mode 100644 libc/sysdeps/linux/or1k/Makefile.arch create mode 100644 libc/sysdeps/linux/or1k/__init_brk.c create mode 100644 libc/sysdeps/linux/or1k/__longjmp.S create mode 100644 libc/sysdeps/linux/or1k/__syscall_error.c create mode 100644 libc/sysdeps/linux/or1k/bits/endian.h create mode 100644 libc/sysdeps/linux/or1k/bits/fcntl.h create mode 100644 libc/sysdeps/linux/or1k/bits/kernel_stat.h create mode 100644 libc/sysdeps/linux/or1k/bits/kernel_types.h create mode 100644 libc/sysdeps/linux/or1k/bits/machine-gmon.h create mode 100644 libc/sysdeps/linux/or1k/bits/setjmp.h create mode 100644 libc/sysdeps/linux/or1k/bits/sigcontextinfo.h create mode 100644 libc/sysdeps/linux/or1k/bits/stackinfo.h create mode 100644 libc/sysdeps/linux/or1k/bits/syscalls.h create mode 100644 libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h create mode 100644 libc/sysdeps/linux/or1k/bits/uClibc_page.h copy libc/sysdeps/linux/{metag => or1k}/bits/wordsize.h (100%) create mode 100644 libc/sysdeps/linux/or1k/brk.c create mode 100644 libc/sysdeps/linux/or1k/clone.c create mode 100644 libc/sysdeps/linux/or1k/crt1.S create mode 100644 libc/sysdeps/linux/or1k/crti.S create mode 100644 libc/sysdeps/linux/or1k/crtn.S create mode 100644 libc/sysdeps/linux/or1k/jmpbuf-offsets.h create mode 100644 libc/sysdeps/linux/or1k/jmpbuf-unwind.h create mode 100644 libc/sysdeps/linux/or1k/sbrk.c create mode 100644 libc/sysdeps/linux/or1k/setjmp.S create mode 100644 libc/sysdeps/linux/or1k/spr_defs.h create mode 100644 libc/sysdeps/linux/or1k/sys/procfs.h create mode 100644 libc/sysdeps/linux/or1k/sys/ucontext.h create mode 100644 libpthread/linuxthreads/sysdeps/or1k/pt-machine.h diff --git a/extra/Configs/Config.in b/extra/Configs/Config.in index 5166efb..a9c01f1 100644 --- a/extra/Configs/Config.in +++ b/extra/Configs/Config.in @@ -34,6 +34,7 @@ choice default TARGET_mips if DESIRED_TARGET_ARCH = "mips" default TARGET_nios if DESIRED_TARGET_ARCH = "nios" default TARGET_nios2 if DESIRED_TARGET_ARCH = "nios2" + default TARGET_or1k if DESIRED_TARGET_ARCH = "or1k" default TARGET_powerpc if DESIRED_TARGET_ARCH = "powerpc" default TARGET_sh if DESIRED_TARGET_ARCH = "sh" default TARGET_sh64 if DESIRED_TARGET_ARCH = "sh64" @@ -107,6 +108,9 @@ config TARGET_mips config TARGET_nios2 bool "nios2" +config TARGET_or1k + bool "or1k" + config TARGET_powerpc bool "powerpc" @@ -208,6 +212,10 @@ if TARGET_mips source "extra/Configs/Config.mips" endif +if TARGET_or1k +source "extra/Configs/Config.or1k" +endif + if TARGET_powerpc source "extra/Configs/Config.powerpc" endif @@ -474,7 +482,7 @@ config LDSO_NO_CLEANUP Unless you know you need this, you should answer N. config UCLIBC_CTOR_DTOR - boolean + bool default y help If you wish to build uClibc with support for global constructor @@ -576,6 +584,7 @@ config UCLIBC_HAS_THREADS_NATIVE !TARGET_m68k && \ !TARGET_microblaze && \ !TARGET_nios2 && \ + !TARGET_or1k && \ !TARGET_vax help If you want to compile uClibc with NPTL support, then answer Y. diff --git a/extra/Configs/Config.or1k b/extra/Configs/Config.or1k new file mode 100644 index 0000000..45e6f0a --- /dev/null +++ b/extra/Configs/Config.or1k @@ -0,0 +1,35 @@ +# +# For a description of the syntax of this configuration file, +# see extra/config/Kconfig-language.txt +# + +config TARGET_ARCH + default "or1k" + +config ARCH_CFLAGS + string + +config ARCH_LDFLAGS + string + +config LIBGCC_CFLAGS + string + +choice + prompt "Target Architecture Type" + default CONFIG_OR1K + help + This is the architecture type of your CPU. This information is used for + optimizing purposes. + + These are the possible settings: + - or1k Generic support for OpenCores OpenRISC/or1k architecture. + +config CONFIG_OR1K + select ARCH_HAS_MMU + select UCLIBC_HAS_FPU + select ARCH_BIG_ENDIAN + select HAS_NO_THREADS + bool "or1k" + +endchoice diff --git a/extra/Configs/defconfigs/or1k/defconfig b/extra/Configs/defconfigs/or1k/defconfig new file mode 100644 index 0000000..f8b8d2b --- /dev/null +++ b/extra/Configs/defconfigs/or1k/defconfig @@ -0,0 +1,245 @@ +# +# Automatically generated make config: don't edit +# Version: 0.9.34-git +# Wed Oct 10 16:27:15 2012 +# +# TARGET_alpha is not set +# TARGET_arm is not set +# TARGET_avr32 is not set +# TARGET_bfin is not set +# TARGET_c6x is not set +# TARGET_cris is not set +# TARGET_e1 is not set +# TARGET_frv is not set +# TARGET_h8300 is not set +# TARGET_hppa is not set +# TARGET_i386 is not set +# TARGET_i960 is not set +# TARGET_ia64 is not set +# TARGET_m68k is not set +# TARGET_microblaze is not set +# TARGET_mips is not set +# TARGET_nios is not set +# TARGET_nios2 is not set +TARGET_or1k=y +# TARGET_powerpc is not set +# TARGET_sh is not set +# TARGET_sh64 is not set +# TARGET_sparc is not set +# TARGET_v850 is not set +# TARGET_vax is not set +# TARGET_x86_64 is not set +# TARGET_xtensa is not set + +# +# Target Architecture Features and Options +# +TARGET_ARCH="or1k" +CONFIG_OR1K=y +TARGET_SUBARCH="" + +# +# Using ELF file format +# +ARCH_BIG_ENDIAN=y + +# +# Using Big Endian +# +ARCH_HAS_MMU=y +ARCH_USE_MMU=y +UCLIBC_HAS_FLOATS=y +UCLIBC_HAS_FPU=y +DO_C99_MATH=y +# DO_XSI_MATH is not set +# UCLIBC_HAS_FENV is not set +KERNEL_HEADERS="${SYSROOT}/usr/include" +HAVE_DOT_CONFIG=y + +# +# General Library Settings +# +DOPIC=y +HAVE_SHARED=y +# FORCE_SHAREABLE_TEXT_SEGMENTS is not set +LDSO_LDD_SUPPORT=y +LDSO_CACHE_SUPPORT=y +LDSO_PRELOAD_ENV_SUPPORT=y +# LDSO_PRELOAD_FILE_SUPPORT is not set +LDSO_BASE_FILENAME="ld.so" +# LDSO_STANDALONE_SUPPORT is not set +# LDSO_PRELINK_SUPPORT is not set +UCLIBC_STATIC_LDCONFIG=y +LDSO_RUNPATH=y +LDSO_SEARCH_INTERP_PATH=y +LDSO_LD_LIBRARY_PATH=y +# LDSO_NO_CLEANUP is not set +UCLIBC_CTOR_DTOR=y +# LDSO_GNU_HASH_SUPPORT is not set +# HAS_NO_THREADS is not set +LINUXTHREADS_OLD=y +# LINUXTHREADS_NEW is not set +# UCLIBC_HAS_THREADS_NATIVE is not set +UCLIBC_HAS_THREADS=y +# PTHREADS_DEBUG_SUPPORT is not set +UCLIBC_HAS_SYSLOG=y +UCLIBC_HAS_LFS=y +# MALLOC is not set +# MALLOC_SIMPLE is not set +MALLOC_STANDARD=y +# MALLOC_GLIBC_COMPAT is not set +# UCLIBC_DYNAMIC_ATEXIT is not set +COMPAT_ATEXIT=y +UCLIBC_SUSV3_LEGACY=y +# UCLIBC_SUSV3_LEGACY_MACROS is not set +UCLIBC_SUSV4_LEGACY=y +# UCLIBC_STRICT_HEADERS is not set +# UCLIBC_HAS_STUBS is not set +UCLIBC_HAS_SHADOW=y +UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y +UCLIBC_HAS___PROGNAME=y +UCLIBC_HAS_PTY=y +ASSUME_DEVPTS=y +UNIX98PTY_ONLY=y +# UCLIBC_HAS_GETPT is not set +# UCLIBC_HAS_LIBUTIL is not set +UCLIBC_HAS_TM_EXTENSIONS=y +UCLIBC_HAS_TZ_CACHING=y +UCLIBC_HAS_TZ_FILE=y +UCLIBC_HAS_TZ_FILE_READ_MANY=y +UCLIBC_TZ_FILE_PATH="/etc/TZ" +UCLIBC_FALLBACK_TO_ETC_LOCALTIME=y + +# +# Advanced Library Settings +# +UCLIBC_PWD_BUFFER_SIZE=256 +UCLIBC_GRP_BUFFER_SIZE=256 + +# +# Support various families of functions +# +UCLIBC_LINUX_MODULE_26=y +UCLIBC_LINUX_MODULE_24=y +UCLIBC_LINUX_SPECIFIC=y +UCLIBC_HAS_GNU_ERROR=y +UCLIBC_BSD_SPECIFIC=y +UCLIBC_HAS_BSD_ERR=y +# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set +# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set +# UCLIBC_NTP_LEGACY is not set +# UCLIBC_SV4_DEPRECATED is not set +UCLIBC_HAS_REALTIME=y +UCLIBC_HAS_ADVANCED_REALTIME=y +UCLIBC_HAS_EPOLL=y +UCLIBC_HAS_XATTR=y +UCLIBC_HAS_PROFILING=y +UCLIBC_HAS_CRYPT_IMPL=y +# UCLIBC_HAS_SHA256_CRYPT_IMPL is not set +# UCLIBC_HAS_SHA512_CRYPT_IMPL is not set +UCLIBC_HAS_CRYPT=y +UCLIBC_HAS_NETWORK_SUPPORT=y +UCLIBC_HAS_SOCKET=y +UCLIBC_HAS_IPV4=y +UCLIBC_HAS_IPV6=y +UCLIBC_HAS_RPC=y +UCLIBC_HAS_FULL_RPC=y +UCLIBC_HAS_REENTRANT_RPC=y +# UCLIBC_USE_NETLINK is not set +# UCLIBC_HAS_BSD_RES_CLOSE is not set +UCLIBC_HAS_COMPAT_RES_STATE=y +# UCLIBC_HAS_EXTRA_COMPAT_RES_STATE is not set +# UCLIBC_HAS_RESOLVER_SUPPORT is not set +# UCLIBC_HAS_LIBRESOLV_STUB is not set +# UCLIBC_HAS_LIBNSL_STUB is not set + +# +# String and Stdio Support +# +UCLIBC_HAS_STRING_GENERIC_OPT=y +UCLIBC_HAS_STRING_ARCH_OPT=y +UCLIBC_HAS_CTYPE_TABLES=y +UCLIBC_HAS_CTYPE_SIGNED=y +UCLIBC_HAS_CTYPE_UNSAFE=y +# UCLIBC_HAS_CTYPE_CHECKED is not set +# UCLIBC_HAS_CTYPE_ENFORCED is not set +UCLIBC_HAS_WCHAR=y +# UCLIBC_HAS_LOCALE is not set +# UCLIBC_HAS_HEXADECIMAL_FLOATS is not set +# UCLIBC_HAS_GLIBC_CUSTOM_PRINTF is not set +UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 +# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set +# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set +UCLIBC_HAS_STDIO_BUFSIZ_4096=y +# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set +UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set +# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set +UCLIBC_HAS_STDIO_GETC_MACRO=y +UCLIBC_HAS_STDIO_PUTC_MACRO=y +UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y +# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set +# UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE is not set +# UCLIBC_HAS_FOPEN_CLOSEEXEC_MODE is not set +# UCLIBC_HAS_GLIBC_CUSTOM_STREAMS is not set +# UCLIBC_HAS_PRINTF_M_SPEC is not set +UCLIBC_HAS_ERRNO_MESSAGES=y +# UCLIBC_HAS_SYS_ERRLIST is not set +UCLIBC_HAS_SIGNUM_MESSAGES=y +# UCLIBC_HAS_SYS_SIGLIST is not set +UCLIBC_HAS_GNU_GETOPT=y +UCLIBC_HAS_GNU_GETSUBOPT=y + +# +# Big and Tall +# +UCLIBC_HAS_REGEX=y +UCLIBC_HAS_REGEX_OLD=y +UCLIBC_HAS_FNMATCH=y +UCLIBC_HAS_FNMATCH_OLD=y +# UCLIBC_HAS_WORDEXP is not set +# UCLIBC_HAS_NFTW is not set +# UCLIBC_HAS_FTW is not set +# UCLIBC_HAS_FTS is not set +UCLIBC_HAS_GLOB=y +# UCLIBC_HAS_GNU_GLOB is not set +# UCLIBC_HAS_UTMPX is not set + +# +# Library Installation Options +# +RUNTIME_PREFIX="/" +DEVEL_PREFIX="/usr" +MULTILIB_DIR="lib" +HARDWIRED_ABSPATH=y + +# +# Security options +# +# UCLIBC_HAS_ARC4RANDOM is not set +# UCLIBC_HAS_SSP is not set +UCLIBC_BUILD_RELRO=y +# UCLIBC_BUILD_NOW is not set +UCLIBC_BUILD_NOEXECSTACK=y + +# +# Development/debugging options +# +CROSS_COMPILER_PREFIX="or1k-linux-uclibc-" +UCLIBC_EXTRA_CFLAGS="" +# DODEBUG is not set +# DODEBUG_PT is not set +# DOSTRIP is not set +# DOASSERTS is not set +# SUPPORT_LD_DEBUG is not set +# SUPPORT_LD_DEBUG_EARLY is not set +# UCLIBC_MALLOC_DEBUGGING is not set +# UCLIBC_HAS_BACKTRACE is not set +WARNINGS="-Wall" +# EXTRA_WARNINGS is not set +# DOMULTI is not set +# UCLIBC_MJN3_ONLY is not set diff --git a/include/elf.h b/include/elf.h index 18d286b..ed95266 100644 --- a/include/elf.h +++ b/include/elf.h @@ -257,7 +257,7 @@ typedef struct #define EM_MN10300 89 /* Matsushita MN10300 */ #define EM_MN10200 90 /* Matsushita MN10200 */ #define EM_PJ 91 /* picoJava */ -#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ +#define EM_OR1K 92 /* OpenRISC 32-bit embedded processor */ #define EM_ARCOMPACT 93 /* ARCompact ISA based Cores: ARC 700 */ #define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ #define EM_IP2K 101 /* Ubicom IP2022 micro controller */ @@ -3188,6 +3188,30 @@ typedef Elf32_Addr Elf32_Conflict; #define R_METAG_TLS_DTPMOD 57 #define R_METAG_TLS_DTPOFF 58 +/* OpenRISC 1000 specific relocs */ +#define R_OR1K_NONE 0 +#define R_OR1K_32 1 +#define R_OR1K_16 2 +#define R_OR1K_8 3 +#define R_OR1K_LO_16_IN_INSN 4 +#define R_OR1K_HI_16_IN_INSN 5 +#define R_OR1K_INSN_REL_26 6 +#define R_OR1K_GNU_VTENTRY 7 +#define R_OR1K_GNU_VTINHERIT 8 +#define R_OR1K_32_PCREL 9 +#define R_OR1K_16_PCREL 10 +#define R_OR1K_8_PCREL 11 +#define R_OR1K_GOTPC_HI16 12 +#define R_OR1K_GOTPC_LO16 13 +#define R_OR1K_GOT16 14 +#define R_OR1K_PLT26 15 +#define R_OR1K_GOTOFF_HI16 16 +#define R_OR1K_GOTOFF_LO16 17 +#define R_OR1K_COPY 18 +#define R_OR1K_GLOB_DAT 19 +#define R_OR1K_JMP_SLOT 20 +#define R_OR1K_RELATIVE 21 + /* ARCompact specific relocs */ #define R_ARC_NONE 0x0 #define R_ARC_8 0x1 diff --git a/ldso/ldso/or1k/dl-debug.h b/ldso/ldso/or1k/dl-debug.h new file mode 100644 index 0000000..d925577 --- /dev/null +++ b/ldso/ldso/or1k/dl-debug.h @@ -0,0 +1,53 @@ +/* OpenRISC 1000 shared library loader suppport + * + * Copyright (C) 2012 Stefan Kristansson + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. The name of the above contributors may not be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +static const char * const _dl_reltypes_tab[] = + { + "R_OR1K_NONE", + "R_OR1K_32", + "R_OR1K_16", + "R_OR1K_8", + "R_OR1K_LO_16_IN_INSN", + "R_OR1K_HI_16_IN_INSN", + "R_OR1K_INSN_REL_26", + "R_OR1K_GNU_VTENTRY", + "R_OR1K_GNU_VTINHERIT", + "R_OR1K_32_PCREL", + "R_OR1K_16_PCREL", + "R_OR1K_8_PCREL", + "R_OR1K_GOTPC_HI16", + "R_OR1K_GOTPC_LO16", + "R_OR1K_GOT16", + "R_OR1K_PLT26", + "R_OR1K_GOTOFF_HI16", + "R_OR1K_GOTOFF_LO16", + "R_OR1K_COPY", + "R_OR1K_GLOB_DAT", + "R_OR1K_JMP_SLOT", + "R_OR1K_RELATIVE", + }; diff --git a/ldso/ldso/or1k/dl-startup.h b/ldso/ldso/or1k/dl-startup.h new file mode 100644 index 0000000..3c99bcd --- /dev/null +++ b/ldso/ldso/or1k/dl-startup.h @@ -0,0 +1,106 @@ +/* Startup code for the OpenRISC 1000 platform, + based on microblaze implementation */ +/* + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +__asm__ ("\ + .text\n\ + .globl _start\n\ + .type _start,@function\n\ + .hidden _start\n\ +_start:\n\ + l.ori r3, r9, 0\n\ + l.ori r3, r1, 0\n\ + l.movhi r11, 0\n\ +1:\n\ + l.addi r3, r3, 4\n\ + l.lwz r12, 0(r3)\n\ + l.sfnei r12, 0\n\ + l.addi r11, r11, 1\n\ + l.bf 1b\n\ + l.nop\n\ + l.ori r3, r11, 0\n\ + l.ori r3, r1, 0\n\ + l.addi r11, r11, -1\n\ + /* store argument counter to stack */\n\ + l.sw 0(r3), r11\n\ + l.addi r1, r1, -24\n\ + l.sw 0(r1), r9\n\ +\n\ + l.jal .LPC0\n\ +#ifndef __OR1K_NODELAY__\n\ + l.nop\n\ +#endif\n\ + /* Load the PIC register */\n\ +.LPC0:\n\ + l.movhi r16, gotpchi(_GLOBAL_OFFSET_TABLE_+(.-.LPC0))\n\ + l.ori r16, r16, gotpclo(_GLOBAL_OFFSET_TABLE_+(.-.LPC0))\n\ + l.add r16, r16, r9\n\ +\n\ + l.jal _dl_start\n\ + l.nop\n\ + /* FALLTHRU */\n\ +\n\ + .globl _dl_start_user\n\ + .type _dl_start_user,@function\n\ +_dl_start_user:\n\ + l.movhi r12, gotoffhi(_dl_skip_args)\n\ + l.ori r12, r12, gotofflo(_dl_skip_args)\n\ + l.add r12, r12, r16\n\ + l.lwz r12, 0(r12)\n\ + l.lwz r3, 24(r1)\n\ +\n\ + l.movhi r9, gotoffhi(_dl_fini)\n\ + l.ori r9, r9, gotofflo(_dl_fini)\n\ + l.add r9, r9, r16\n\ +\n\ + l.addi r9, r9, -8\n\ + l.addi r1, r1, 24\n\ + l.jr r11\n\ + l.nop\n\ + .size _dl_start_user, . - _dl_start_user\n\ + .previous\n\ +"); +/* + * Get a pointer to the argv array. On many platforms this can be just + * the address of the first argument, on other platforms we need to + * do something a little more subtle here. + */ +#define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long*) ARGS)+1) + +/* The ld.so library requires relocations */ +#define ARCH_NEEDS_BOOTSTRAP_RELOCS + +static __always_inline +void PERFORM_BOOTSTRAP_RELOC(ELF_RELOC *rpnt, unsigned long *reloc_addr, + unsigned long symbol_addr, unsigned long load_addr, + attribute_unused Elf32_Sym *symtab) +{ + + switch (ELF_R_TYPE(rpnt->r_info)) + { + case R_OR1K_RELATIVE: + + *reloc_addr = load_addr + rpnt->r_addend; + break; + + default: + _dl_exit(1); + break; + + } + +} diff --git a/ldso/ldso/avr32/dl-syscalls.h b/ldso/ldso/or1k/dl-syscalls.h similarity index 100% copy from ldso/ldso/avr32/dl-syscalls.h copy to ldso/ldso/or1k/dl-syscalls.h diff --git a/ldso/ldso/or1k/dl-sysdep.h b/ldso/ldso/or1k/dl-sysdep.h new file mode 100644 index 0000000..21ca028 --- /dev/null +++ b/ldso/ldso/or1k/dl-sysdep.h @@ -0,0 +1,105 @@ +/* elf reloc code for the or1k platform, based on glibc 2.3.6, dl-machine.h */ + +/* + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* Use reloca */ +#define ELF_USES_RELOCA + +#include <elf.h> + + +/* Initialise the GOT */ +#define INIT_GOT(GOT_BASE,MODULE) \ +do { \ + GOT_BASE[2] = (unsigned long) _dl_linux_resolve; \ + GOT_BASE[1] = (unsigned long) MODULE; \ +} while(0) + +/* Here we define the magic numbers that this dynamic loader should accept */ + +#define MAGIC1 EM_OR1K +#undef MAGIC2 +/* Used for error messages */ +#define ELF_TARGET "or1k" + +#define elf_machine_type_class(type) \ + (((type) == R_OR1K_JMP_SLOT) * ELF_RTYPE_CLASS_PLT \ + | ((type) == R_OR1K_COPY) * ELF_RTYPE_CLASS_COPY) + +static inline Elf32_Addr * +or1k_get_got (void) +{ + Elf32_Addr *got; + Elf32_Addr linkreg; + __asm__("l.ori %0, r9, 0\n" + "l.jal .LPC1\n" +#ifndef __OR1K_NODELAY__ + "l.nop\n" +#endif + ".LPC1:\n" + "l.movhi %1, gotpchi(_GLOBAL_OFFSET_TABLE_+(.-.LPC1))\n" + "l.ori %1, %1, gotpclo(_GLOBAL_OFFSET_TABLE_+(.-.LPC1))\n" + "l.add %1, %1, r9\n" + "l.ori r9, %0, 0\n" + : "=r" (linkreg), "=r" (got)); + return got; +} + +/* Return the link-time address of _DYNAMIC. Conveniently, this is the + first element of the GOT. */ +static inline Elf32_Addr +elf_machine_dynamic (void) +{ + Elf32_Addr *got = or1k_get_got(); + return *got; +} + + +/* Return the run-time load address of the shared object. */ +static inline Elf32_Addr +elf_machine_load_address (void) +{ + /* Compute the difference between the runtime address of _DYNAMIC as seen + by a GOTOFF reference, and the link-time address found in the special + unrelocated first GOT entry. */ + Elf32_Addr dyn; + Elf32_Addr *got = or1k_get_got(); + + __asm__ __volatile__ ( + "l.movhi %0, gotoffhi(_DYNAMIC);" + "l.ori %0, %0, gotofflo(_DYNAMIC);" + "l.add %0, %0, %1;" + : "=r"(dyn), "=r"(got) + ); + return dyn - *got; +} + + + +static __always_inline void +elf_machine_relative (Elf32_Addr load_off, const Elf32_Addr rel_addr, + Elf32_Word relative_count) +{ + Elf32_Rela * rpnt = (void *) rel_addr; + --rpnt; + do { + Elf32_Addr *const reloc_addr = (void *) (load_off + + (++rpnt)->r_offset); + + *reloc_addr += load_off; + } while (--relative_count); +} diff --git a/ldso/ldso/or1k/elfinterp.c b/ldso/ldso/or1k/elfinterp.c new file mode 100644 index 0000000..928e95b --- /dev/null +++ b/ldso/ldso/or1k/elfinterp.c @@ -0,0 +1,333 @@ +/* vi: set sw=4 ts=4: */ +/* OpenRISC 1000 ELF shared library loader suppport + * + * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald, + * David Engel, Hongjiu Lu and Mitch D'Souza + * Copyright (C) 2001-2004 Erik Andersen + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. The name of the above contributors may not be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include "ldso.h" + +/* Program to load an ELF binary on a linux system, and run it. + References to symbols in sharable libraries can be resolved by either + an ELF sharable library or a linux style of shared library. */ + +/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have + I ever taken any courses on internals. This program was developed using + information available through the book "UNIX SYSTEM V RELEASE 4, + Programmers guide: Ansi C and Programming Support Tools", which did + a more than adequate job of explaining everything required to get this + working. */ + +extern int _dl_linux_resolve(void); + +unsigned long +_dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry) +{ + ELF_RELOC *this_reloc; + char *strtab; + ElfW(Sym) *symtab; + int symtab_index; + char *rel_addr; + char *new_addr; + char **got_addr; + ElfW(Addr) instr_addr; + char *symname; + + rel_addr = (char *)tpnt->dynamic_info[DT_JMPREL]; + this_reloc = (ELF_RELOC *)(rel_addr + reloc_entry); + symtab_index = ELF_R_SYM(this_reloc->r_info); + + symtab = (ElfW(Sym) *)tpnt->dynamic_info[DT_SYMTAB]; + strtab = (char *)tpnt->dynamic_info[DT_STRTAB]; + symname = strtab + symtab[symtab_index].st_name; + + /* Address of the jump instruction to fix up. */ + instr_addr = (this_reloc->r_offset + tpnt->loadaddr); + got_addr = (char **)instr_addr; + + /* Get the address of the GOT entry. */ + new_addr = _dl_find_hash(symname, &_dl_loaded_modules->symbol_scope, tpnt, ELF_RTYPE_CLASS_PLT, NULL); + if (unlikely(!new_addr)) { + _dl_dprintf(2, "%s: can't resolve symbol '%s' in lib '%s'.\n", + _dl_progname, symname, tpnt->libname); + _dl_exit(1); + } + +#if defined (__SUPPORT_LD_DEBUG__) + if ((unsigned long)got_addr < 0x40000000) { + if (_dl_debug_bindings) { + _dl_dprintf(_dl_debug_file, "\nresolve function: %s", symname); + if (_dl_debug_detail) + _dl_dprintf(_dl_debug_file, + "\tpatched: %x ==> %x @ %x\n", + *got_addr, new_addr, got_addr); + } + } + if (!_dl_debug_nofixups) +#endif + *got_addr = new_addr; + + return (unsigned long)new_addr; +} + +static int +_dl_parse(struct elf_resolve *tpnt, struct r_scope_elem *scope, + unsigned long rel_addr, unsigned long rel_size, + int (*reloc_fnc)(struct elf_resolve *tpnt, struct r_scope_elem *scope, + ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab)) +{ + unsigned int i; + char *strtab; + ElfW(Sym) *symtab; + ELF_RELOC *rpnt; + int symtab_index; + + /* Parse the relocation information. */ + rpnt = (ELF_RELOC *)rel_addr; + rel_size /= sizeof(ELF_RELOC); + + symtab = (ElfW(Sym) *)tpnt->dynamic_info[DT_SYMTAB]; + strtab = (char *)tpnt->dynamic_info[DT_STRTAB]; + + for (i = 0; i < rel_size; i++, rpnt++) { + int res; + + symtab_index = ELF_R_SYM(rpnt->r_info); + + debug_sym(symtab, strtab, symtab_index); + debug_reloc(symtab, strtab, rpnt); + + res = reloc_fnc(tpnt, scope, rpnt, symtab, strtab); + + if (res == 0) + continue; + + _dl_dprintf(2, "\n%s: ", _dl_progname); + + if (symtab_index) + _dl_dprintf(2, "symbol '%s': ", + strtab + symtab[symtab_index].st_name); + + if (unlikely(res < 0)) { + int reloc_type = ELF_R_TYPE(rpnt->r_info); + + _dl_dprintf(2, "can't handle reloc type " +#if defined (__SUPPORT_LD_DEBUG__) + "%s\n", _dl_reltypes(reloc_type)); +#else + "%x\n", reloc_type); +#endif + _dl_exit(-res); + } else if (unlikely(res > 0)) { + _dl_dprintf(2, "can't resolve symbol\n"); + return res; + } + } + + return 0; +} + +static int +_dl_do_reloc(struct elf_resolve *tpnt, struct r_scope_elem *scope, + ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab) +{ + int reloc_type; + int symtab_index; + char *symname; +#if defined USE_TLS && USE_TLS + struct elf_resolve *tls_tpnt; +#endif + struct symbol_ref sym_ref; + ElfW(Addr) *reloc_addr; + ElfW(Addr) symbol_addr; +#if defined (__SUPPORT_LD_DEBUG__) + ElfW(Addr) old_val; +#endif + + struct unaligned { + Elf32_Addr x; + } __attribute__ ((packed, may_alias)); + + reloc_addr = (ElfW(Addr)*)(tpnt->loadaddr + (unsigned long)rpnt->r_offset); + reloc_type = ELF_R_TYPE(rpnt->r_info); + symtab_index = ELF_R_SYM(rpnt->r_info); + sym_ref.sym = &symtab[symtab_index]; + sym_ref.tpnt = NULL; + symbol_addr = 0; + symname = strtab + sym_ref.sym->st_name; + + if (symtab_index) { + symbol_addr = (ElfW(Addr))_dl_find_hash(symname, scope, tpnt, + elf_machine_type_class(reloc_type), &sym_ref); + /* + * We want to allow undefined references to weak symbols - this + * might have been intentional. We should not be linking local + * symbols here, so all bases should be covered. + */ + if (unlikely(!symbol_addr && (ELF_ST_TYPE(sym_ref.sym->st_info) != STT_TLS) + && (ELF_ST_BIND(sym_ref.sym->st_info) != STB_WEAK))) { + /* This may be non-fatal if called from dlopen. */ + return 1; + } +#if defined USE_TLS && USE_TLS + tls_tpnt = sym_ref.tpnt; +#endif + } else { + /* Relocs against STN_UNDEF are usually treated as using a + * symbol value of zero, and using the module containing the + * reloc itself. */ + symbol_addr = sym_ref.sym->st_value; +#if defined USE_TLS && USE_TLS + tls_tpnt = tpnt; +#endif + } + + +#if defined (__SUPPORT_LD_DEBUG__) + if (reloc_addr) { + old_val = ((struct unaligned *)reloc_addr)->x; + } else { + old_val = 0; + } +#endif + + switch (reloc_type) { + case R_OR1K_NONE: + break; + + case R_OR1K_8: + case R_OR1K_16: + case R_OR1K_32: + /* Support relocations on mis-aligned offsets. */ + ((struct unaligned *)reloc_addr)->x = symbol_addr + + rpnt->r_addend; + break; + + case R_OR1K_8_PCREL: + case R_OR1K_16_PCREL: + case R_OR1K_32_PCREL: + case R_OR1K_INSN_REL_26: + *reloc_addr = symbol_addr + rpnt->r_addend; + break; + + case R_OR1K_GLOB_DAT: + case R_OR1K_JMP_SLOT: + *reloc_addr = symbol_addr + rpnt->r_addend; + break; +/* Handled by elf_machine_relative */ + case R_OR1K_RELATIVE: + *reloc_addr = (unsigned long)tpnt->loadaddr + rpnt->r_addend; + break; + + case R_OR1K_COPY: + if (symbol_addr) { +#if defined (__SUPPORT_LD_DEBUG__) + if (_dl_debug_move) + _dl_dprintf(_dl_debug_file, + "\t%s move %d bytes from %x to %x\n", + symname, sym_ref.sym->st_size, + symbol_addr, reloc_addr); +#endif + + _dl_memcpy((char *)reloc_addr, + (char *)symbol_addr, + sym_ref.sym->st_size); + } +#if defined (__SUPPORT_LD_DEBUG__) + else + _dl_dprintf(_dl_debug_file, "no symbol_addr to copy !?\n"); +#endif + break; + + default: + return -1; /* Calls _dl_exit(1). */ + } + +#if defined (__SUPPORT_LD_DEBUG__) + if (_dl_debug_reloc && _dl_debug_detail) + _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x\n", + old_val, ((struct unaligned *)reloc_addr)->x, + reloc_addr); +#endif + + return 0; +} + +static int +_dl_do_lazy_reloc(struct elf_resolve *tpnt, struct r_scope_elem *scope, + ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab) +{ + int reloc_type; + int symtab_index; + ElfW(Addr) *reloc_addr; +#if defined (__SUPPORT_LD_DEBUG__) + ElfW(Addr) old_val; +#endif + + (void)scope; + symtab_index = ELF_R_SYM(rpnt->r_info); + (void)strtab; + + reloc_addr = (ElfW(Addr)*)(tpnt->loadaddr + rpnt->r_offset); + reloc_type = ELF_R_TYPE(rpnt->r_info); + +#if defined (__SUPPORT_LD_DEBUG__) + old_val = *reloc_addr; +#endif + + switch (reloc_type) { + case R_OR1K_NONE: + break; + case R_OR1K_JMP_SLOT: + *reloc_addr += (unsigned long)tpnt->loadaddr; + break; + default: + _dl_exit(1); + } + +#if defined (__SUPPORT_LD_DEBUG__) + if (_dl_debug_reloc && _dl_debug_detail) + _dl_dprintf(_dl_debug_file, "\tpatched_lazy: %x ==> %x @ %x\n", + old_val, *reloc_addr, reloc_addr); +#endif + + return 0; +} + +void +_dl_parse_lazy_relocation_information(struct dyn_elf *rpnt, + unsigned long rel_addr, unsigned long rel_size) +{ + (void)_dl_parse(rpnt->dyn, NULL, rel_addr, rel_size, _dl_do_lazy_reloc); +} + +int +_dl_parse_relocation_information(struct dyn_elf *rpnt, + struct r_scope_elem *scope, unsigned long rel_addr, unsigned long rel_size) +{ + return _dl_parse(rpnt->dyn, scope, rel_addr, rel_size, _dl_do_reloc); +} diff --git a/ldso/ldso/or1k/resolve.S b/ldso/ldso/or1k/resolve.S new file mode 100644 index 0000000..4a156d5 --- /dev/null +++ b/ldso/ldso/or1k/resolve.S @@ -0,0 +1,54 @@ +/* This code is used in dl-runtime.c to call the `fixup' function + and then redirect to the address it returns. */ +/* We assume that R11 contain relocation offset and R12 contains + link_map (_DYNAMIC). This must be consistent with the JUMP_SLOT + layout generated by binutils. */ + +/* Based on microblaze implementation */ +/* + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +.text +.align 4 +.globl _dl_linux_resolver +.globl _dl_linux_resolve +.type _dl_linux_resolve,@function + +_dl_linux_resolve: + l.addi r1, r1, -32 + l.sw 0(r1), r9 + /* save function arguments */ + l.sw 8(r1), r3 + l.sw 12(r1), r4 + l.sw 16(r1), r5 + l.sw 20(r1), r6 + l.sw 24(r1), r7 + l.sw 28(r1), r8 + l.ori r3, r12, 0 + l.ori r4, r11, 0 + l.jal _dl_linux_resolver + l.nop + l.lwz r8, 28(r1) + l.lwz r7, 24(r1) + l.lwz r6, 20(r1) + l.lwz r5, 16(r1) + l.lwz r4, 12(r1) + l.lwz r3, 8(r1) + l.lwz r9, 0(r1) + l.addi r1, r1, 32 + l.jr r11 + l.nop + .size _dl_linux_resolve, . - _dl_linux_resolve diff --git a/libc/sysdeps/linux/alpha/Makefile b/libc/sysdeps/linux/or1k/Makefile similarity index 100% copy from libc/sysdeps/linux/alpha/Makefile copy to libc/sysdeps/linux/or1k/Makefile diff --git a/libc/sysdeps/linux/or1k/Makefile.arch b/libc/sysdeps/linux/or1k/Makefile.arch new file mode 100644 index 0000000..53d4ed5 --- /dev/null +++ b/libc/sysdeps/linux/or1k/Makefile.arch @@ -0,0 +1,9 @@ +# Makefile for uClibc +# +# Copyright (C) 2010 Jonas Bonn <jonas(a)southpole.se> +# +# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. +# + +CSRC-y := __syscall_error.c __init_brk.c brk.c sbrk.c clone.c +SSRC-y := __longjmp.S setjmp.S diff --git a/libc/sysdeps/linux/or1k/__init_brk.c b/libc/sysdeps/linux/or1k/__init_brk.c new file mode 100644 index 0000000..4c6763f --- /dev/null +++ b/libc/sysdeps/linux/or1k/__init_brk.c @@ -0,0 +1,28 @@ +/* From libc-5.3.12 */ + +#include <errno.h> +#include <unistd.h> +#include <sys/syscall.h> + +void * ___brk_addr = 0; + +int __init_brk (void); +void *_brk(void *ptr); + +#define __NR__brk __NR_brk +_syscall1(void *, _brk, void *, ptr); + +int +__init_brk (void) +{ + if (___brk_addr == 0) + { + ___brk_addr = _brk(0); + if (___brk_addr == 0) + { + __set_errno(ENOMEM); + return -1; + } + } + return 0; +} diff --git a/libc/sysdeps/linux/or1k/__longjmp.S b/libc/sysdeps/linux/or1k/__longjmp.S new file mode 100644 index 0000000..1eb5bb4 --- /dev/null +++ b/libc/sysdeps/linux/or1k/__longjmp.S @@ -0,0 +1,81 @@ +/* longjmp for or1k + + Based on: + longjmp for PowerPC. + Copyright (C) 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <jmpbuf-offsets.h> + +#ifdef __UCLIBC_HAS_FLOATS__ +#define FP(x...) x +#else +#define FP(x...) +#endif + +.globl __longjmp; +.type __longjmp,@function; +.align 2; + +__longjmp: +# l.lwz r11,(JB_SR*4)(r3) +# l.mtspr r0,r11,SPR_SR + l.lwz r1,((JB_GPRS+0)*4)(r3) + l.lwz r2,((JB_GPRS+1)*4)(r3) + /* pass through "value" to r11, then restore r4, for what it's worth" */ +#if 1 + /* if r4 is 0, something wrong, so set it to 1 */ + l.sfeqi r4, 0x0 + l.bnf 1f /* r4 != 0, longjmp value sensible */ + l.nop + l.ori r4, r0, 0x1 /* make nonzero */ +1: +#endif + l.addi r11, r4, 0 + l.lwz r4,((JB_GPRS+3)*4)(r3) + l.lwz r5,((JB_GPRS+4)*4)(r3) + l.lwz r6,((JB_GPRS+5)*4)(r3) + l.lwz r7,((JB_GPRS+6)*4)(r3) + l.lwz r8,((JB_GPRS+7)*4)(r3) + l.lwz r9,((JB_GPRS+8)*4)(r3) + l.lwz r10,((JB_GPRS+9)*4)(r3) + l.lwz r12,((JB_GPRS+11)*4)(r3) + l.lwz r13,((JB_GPRS+12)*4)(r3) + l.lwz r14,((JB_GPRS+13)*4)(r3) + l.lwz r15,((JB_GPRS+14)*4)(r3) + l.lwz r16,((JB_GPRS+15)*4)(r3) + l.lwz r17,((JB_GPRS+16)*4)(r3) + l.lwz r18,((JB_GPRS+17)*4)(r3) + l.lwz r19,((JB_GPRS+18)*4)(r3) + l.lwz r20,((JB_GPRS+19)*4)(r3) + l.lwz r21,((JB_GPRS+20)*4)(r3) + l.lwz r22,((JB_GPRS+21)*4)(r3) + l.lwz r23,((JB_GPRS+22)*4)(r3) + l.lwz r24,((JB_GPRS+23)*4)(r3) + l.lwz r25,((JB_GPRS+24)*4)(r3) + l.lwz r26,((JB_GPRS+25)*4)(r3) + l.lwz r27,((JB_GPRS+26)*4)(r3) + l.lwz r28,((JB_GPRS+27)*4)(r3) + l.lwz r29,((JB_GPRS+28)*4)(r3) + l.lwz r30,((JB_GPRS+29)*4)(r3) + l.lwz r31,((JB_GPRS+30)*4)(r3) + l.jr r9 + l.nop +.size __longjmp,.-__longjmp + +libc_hidden_def(__longjmp) diff --git a/libc/sysdeps/linux/or1k/__syscall_error.c b/libc/sysdeps/linux/or1k/__syscall_error.c new file mode 100644 index 0000000..ef83078 --- /dev/null +++ b/libc/sysdeps/linux/or1k/__syscall_error.c @@ -0,0 +1,30 @@ +/* Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <errno.h> + +int __syscall_error (int err_no); + +/* This routine is jumped to by all the syscall handlers, to stash + * an error number into errno. */ +int __syscall_error (int err_no) +{ + __set_errno (err_no); + return -1; +} + diff --git a/libc/sysdeps/linux/or1k/bits/endian.h b/libc/sysdeps/linux/or1k/bits/endian.h new file mode 100644 index 0000000..799e27a --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/endian.h @@ -0,0 +1,25 @@ +/* Copyright (C) 1997, 1998 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* or1k can be little or big endian. Hopefully gcc will know... */ + +#ifndef _ENDIAN_H +# error "Never use <bits/endian.h> directly; include <endian.h> instead." +#endif + +#define __BYTE_ORDER __BIG_ENDIAN diff --git a/libc/sysdeps/linux/or1k/bits/fcntl.h b/libc/sysdeps/linux/or1k/bits/fcntl.h new file mode 100644 index 0000000..b081300 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/fcntl.h @@ -0,0 +1,236 @@ +/* O_*, F_*, FD_* bit values for Linux. + Copyright (C) 1995-1998, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _FCNTL_H +# error "Never use <bits/fcntl.h> directly; include <fcntl.h> instead." +#endif + + +#include <sys/types.h> +#ifdef __USE_GNU +# include <bits/uio.h> +#endif + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_ACCMODE 0003 +#define O_RDONLY 00 +#define O_WRONLY 01 +#define O_RDWR 02 +#define O_CREAT 0100 /* not fcntl */ +#define O_EXCL 0200 /* not fcntl */ +#define O_NOCTTY 0400 /* not fcntl */ +#define O_TRUNC 01000 /* not fcntl */ +#define O_APPEND 02000 +#define O_NONBLOCK 04000 +#define O_NDELAY O_NONBLOCK +#define O_SYNC 010000 +#define O_FSYNC O_SYNC +#define O_ASYNC 020000 + +#ifdef __USE_GNU +# define O_DIRECT 040000 /* Direct disk access. */ +# define O_DIRECTORY 0200000 /* Must be a directory. */ +# define O_NOFOLLOW 0400000 /* Do not follow links. */ +# define O_NOATIME 01000000 /* Do not set atime. */ +# define O_CLOEXEC 02000000 /* Set close_on_exec. */ +#endif + +#ifdef __USE_LARGEFILE64 +# define O_LARGEFILE 0100000 +#endif + +/* For now Linux has synchronisity options for data and read operations. + We define the symbols here but let them do the same as O_SYNC since + this is a superset. */ +#if defined __USE_POSIX199309 || defined __USE_UNIX98 +# define O_DSYNC O_SYNC /* Synchronize data. */ +# define O_RSYNC O_SYNC /* Synchronize read operations. */ +#endif + +/* Values for the second argument to `fcntl'. */ +#define F_DUPFD 0 /* Duplicate file descriptor. */ +#define F_GETFD 1 /* Get file descriptor flags. */ +#define F_SETFD 2 /* Set file descriptor flags. */ +#define F_GETFL 3 /* Get file status flags. */ +#define F_SETFL 4 /* Set file status flags. */ + +#ifndef __USE_FILE_OFFSET64 +# define F_GETLK 5 /* Get record locking info. */ +# define F_SETLK 6 /* Set record locking info (non-blocking). */ +# define F_SETLKW 7 /* Set record locking info (blocking). */ +#else +# define F_GETLK F_GETLK64 /* Get record locking info. */ +# define F_SETLK F_SETLK64 /* Set record locking info (non-blocking).*/ +# define F_SETLKW F_SETLKW64 /* Set record locking info (blocking). */ +#endif + +#define F_GETLK64 12 /* Get record locking info. */ +#define F_SETLK64 13 /* Set record locking info (non-blocking). */ +#define F_SETLKW64 14 /* Set record locking info (blocking). */ + +#if defined __USE_BSD || defined __USE_XOPEN2K +# define F_SETOWN 8 /* Get owner of socket (receiver of SIGIO). */ +# define F_GETOWN 9 /* Set owner of socket (receiver of SIGIO). */ +#endif + +#ifdef __USE_GNU +# define F_SETSIG 10 /* Set number of signal to be sent. */ +# define F_GETSIG 11 /* Get number of signal to be sent. */ +#endif + +#ifdef __USE_GNU +# define F_SETLEASE 1024 /* Set a lease. */ +# define F_GETLEASE 1025 /* Enquire what lease is active. */ +# define F_NOTIFY 1026 /* Request notfications on a directory. */ +#endif + +/* For F_[GET|SET]FL. */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* For posix fcntl() and `l_type' field of a `struct flock' for lockf(). */ +#define F_RDLCK 0 /* Read lock. */ +#define F_WRLCK 1 /* Write lock. */ +#define F_UNLCK 2 /* Remove lock. */ + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ + +#ifdef __USE_BSD +/* Operations for bsd flock(), also used by the kernel implementation */ +# define LOCK_SH 1 /* shared lock */ +# define LOCK_EX 2 /* exclusive lock */ +# define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +# define LOCK_UN 8 /* remove lock */ +#endif + +#ifdef __USE_GNU +# define LOCK_MAND 32 /* This is a mandatory flock: */ +# define LOCK_READ 64 /* ... which allows concurrent read operations. */ +# define LOCK_WRITE 128 /* ... which allows concurrent write operations. */ +# define LOCK_RW 192 /* ... Which allows concurrent read & write operations. */ +#endif + +#ifdef __USE_GNU +/* Types of directory notifications that may be requested with F_NOTIFY. */ +# define DN_ACCESS 0x00000001 /* File accessed. */ +# define DN_MODIFY 0x00000002 /* File modified. */ +# define DN_CREATE 0x00000004 /* File created. */ +# define DN_DELETE 0x00000008 /* File removed. */ +# define DN_RENAME 0x00000010 /* File renamed. */ +# define DN_ATTRIB 0x00000020 /* File changed attibutes. */ +# define DN_MULTISHOT 0x80000000 /* Don't remove notifier. */ +#endif + +struct flock + { + short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */ + short int l_whence; /* Where `l_start' is relative to (like `lseek'). */ +#ifndef __USE_FILE_OFFSET64 + __off_t l_start; /* Offset where the lock begins. */ + __off_t l_len; /* Size of the locked area; zero means until EOF. */ +#else + __off64_t l_start; /* Offset where the lock begins. */ + __off64_t l_len; /* Size of the locked area; zero means until EOF. */ +#endif + __pid_t l_pid; /* Process holding the lock. */ + }; + +#ifdef __USE_LARGEFILE64 +struct flock64 + { + short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */ + short int l_whence; /* Where `l_start' is relative to (like `lseek'). */ + __off64_t l_start; /* Offset where the lock begins. */ + __off64_t l_len; /* Size of the locked area; zero means until EOF. */ + __pid_t l_pid; /* Process holding the lock. */ + }; +#endif + +/* Define some more compatibility macros to be backward compatible with + BSD systems which did not managed to hide these kernel macros. */ +#ifdef __USE_BSD +# define FAPPEND O_APPEND +# define FFSYNC O_FSYNC +# define FASYNC O_ASYNC +# define FNONBLOCK O_NONBLOCK +# define FNDELAY O_NDELAY +#endif /* Use BSD. */ + +/* Advise to `posix_fadvise'. */ +#ifdef __USE_XOPEN2K +# define POSIX_FADV_NORMAL 0 /* No further special treatment. */ +# define POSIX_FADV_RANDOM 1 /* Expect random page references. */ +# define POSIX_FADV_SEQUENTIAL 2 /* Expect sequential page references. */ +# define POSIX_FADV_WILLNEED 3 /* Will need these pages. */ +# define POSIX_FADV_DONTNEED 4 /* Don't need these pages. */ +# define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */ +#endif + +#if defined __USE_GNU && defined __UCLIBC_LINUX_SPECIFIC__ +/* Flags for SYNC_FILE_RANGE. */ +# define SYNC_FILE_RANGE_WAIT_BEFORE 1 /* Wait upon writeout of all pages + in the range before performing the + write. */ +# define SYNC_FILE_RANGE_WRITE 2 /* Initiate writeout of all those + dirty pages in the range which are + not presently under writeback. */ +# define SYNC_FILE_RANGE_WAIT_AFTER 4 /* Wait upon writeout of all pages in + the range after performing the + write. */ + +/* Flags for SPLICE and VMSPLICE. */ +# define SPLICE_F_MOVE 1 /* Move pages instead of copying. */ +# define SPLICE_F_NONBLOCK 2 /* Don't block on the pipe splicing + (but we may still block on the fd + we splice from/to). */ +# define SPLICE_F_MORE 4 /* Expect more data. */ +# define SPLICE_F_GIFT 8 /* Pages passed in are a gift. */ +#endif + +__BEGIN_DECLS + +#if defined __USE_GNU && defined __UCLIBC_LINUX_SPECIFIC__ + +/* Provide kernel hint to read ahead. */ +extern ssize_t readahead (int __fd, __off64_t __offset, size_t __count) + __THROW; + + +/* Selective file content synch'ing. */ +extern int sync_file_range (int __fd, __off64_t __from, __off64_t __to, + unsigned int __flags); + +/* Splice address range into a pipe. */ +extern ssize_t vmsplice (int __fdout, const struct iovec *__iov, + size_t __count, unsigned int __flags); + +/* Splice two files together. */ +extern ssize_t splice (int __fdin, __off64_t *__offin, int __fdout, + __off64_t *__offout, size_t __len, + unsigned int __flags); + +/* In-kernel implementation of tee for pipe buffers. */ +extern ssize_t tee (int __fdin, int __fdout, size_t __len, + unsigned int __flags); + +#endif +__END_DECLS diff --git a/libc/sysdeps/linux/or1k/bits/kernel_stat.h b/libc/sysdeps/linux/or1k/bits/kernel_stat.h new file mode 100644 index 0000000..9c8abf6 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/kernel_stat.h @@ -0,0 +1,59 @@ +/* taken from linux/include/asm-or1k/stat.h */ + +#ifndef _BITS_STAT_STRUCT_H +#define _BITS_STAT_STRUCT_H + +#ifndef _LIBC +#error bits/kernel_stat.h is for internal uClibc use only! +#endif + +struct kernel_stat { + unsigned long st_dev; /* Device. */ + unsigned long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long st_rdev; /* Device number, if device. */ + unsigned long __pad1; + long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + int __pad2; + long st_blocks; /* Number 512-byte blocks allocated. */ + struct timespec st_atim; + struct timespec st_mtim; + struct timespec st_ctim; + /* + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + */ + unsigned int __unused4; + unsigned int __unused5; +}; + +/* This matches struct stat64 in glibc2.1. + */ +struct kernel_stat64 { + unsigned long long st_dev; /* Device. */ + unsigned long long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long long st_rdev; /* Device number, if device. */ + unsigned long long __pad1; + long long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + int __pad2; + long long st_blocks; /* Number 512-byte blocks allocated. */ + struct timespec st_atim; + struct timespec st_mtim; + struct timespec st_ctim; + unsigned int __unused4; + unsigned int __unused5; +}; +#endif diff --git a/libc/sysdeps/linux/or1k/bits/kernel_types.h b/libc/sysdeps/linux/or1k/bits/kernel_types.h new file mode 100644 index 0000000..4c5fe3e --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/kernel_types.h @@ -0,0 +1 @@ +#include <asm/posix_types.h> diff --git a/libc/sysdeps/linux/or1k/bits/machine-gmon.h b/libc/sysdeps/linux/or1k/bits/machine-gmon.h new file mode 100644 index 0000000..15a1773 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/machine-gmon.h @@ -0,0 +1,31 @@ +/* or1k-specific implementation of profiling support. + Copyright (C) 1997 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* We need a special version of the `mcount' function because it has + to preserve more registers than your usual function. */ + +void __mcount_internal (unsigned long frompc, unsigned long selfpc); + +#define _MCOUNT_DECL(frompc, selfpc) \ +void __mcount_internal (unsigned long frompc, unsigned long selfpc) + + +/* Define MCOUNT as empty since we have the implementation in another + file. */ +#define MCOUNT diff --git a/libc/sysdeps/linux/or1k/bits/setjmp.h b/libc/sysdeps/linux/or1k/bits/setjmp.h new file mode 100644 index 0000000..ad93b19 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/setjmp.h @@ -0,0 +1,32 @@ +/* Copyright (C) 1997, 1998, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* Define the machine-dependent type `jmp_buf'. or1k version. */ + +#ifndef _BITS_SETJMP_H +#define _BITS_SETJMP_H 1 + +#ifndef _SETJMP_H +# error "Never include <bits/setjmp.h> directly; use <setjmp.h> instead." +#endif + +#ifndef _ASM +typedef long int __jmp_buf[32]; +#endif + +#endif diff --git a/libc/sysdeps/linux/or1k/bits/sigcontextinfo.h b/libc/sysdeps/linux/or1k/bits/sigcontextinfo.h new file mode 100644 index 0000000..369738a --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/sigcontextinfo.h @@ -0,0 +1,24 @@ +/* Copyright (C) 1998, 1999, 2001 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <signal.h> + +#define SIGCONTEXT struct sigcontext * +#define SIGCONTEXT_EXTRA_ARGS +#define CALL_SIGHANDLER(handler, signo, ctx) \ + (handler)((signo), SIGCONTEXT_EXTRA_ARGS (ctx)) diff --git a/libc/sysdeps/linux/or1k/bits/stackinfo.h b/libc/sysdeps/linux/or1k/bits/stackinfo.h new file mode 100644 index 0000000..12d46a0 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/stackinfo.h @@ -0,0 +1,28 @@ +/* Copyright (C) 1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* This file contains a bit of information about the stack allocation + of the processor. */ + +#ifndef _STACKINFO_H +#define _STACKINFO_H 1 + +/* On or1k the stack grows down. */ +#define _STACK_GROWS_DOWN 1 + +#endif /* stackinfo.h */ diff --git a/libc/sysdeps/linux/or1k/bits/syscalls.h b/libc/sysdeps/linux/or1k/bits/syscalls.h new file mode 100644 index 0000000..6a08d3c --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/syscalls.h @@ -0,0 +1,101 @@ +/* + * Based on arm/bits/syscalls.h + */ + +#ifndef _BITS_SYSCALLS_H +#define _BITS_SYSCALLS_H +#ifndef _SYSCALL_H +# error "Never use <bits/syscalls.h> directly; include <sys/syscall.h> instead." +#endif + +/* + Some of the sneaky macros in the code were taken from + glibc-2.3.2/sysdeps/unix/sysv/linux/arm/sysdep.h +*/ + +#ifdef __ASSEMBLER__ + +/* TODO: recheck this */ + +/* Call a given syscall, with arguments loaded. Unlike the DO_CALL + macro in glibc, this macro does not load syscall arguments. */ +#undef DO_CALL +#define DO_CALL(syscall_name) \ + l.lwz r11, =SYS_ify (syscall_name); \ + l.sys 1 \ + l.nop + +#else + +#include <errno.h> + +#define INTERNAL_SYSCALL_NCS(name, err, nr, args...) \ + ({ unsigned long __sys_result; \ + { \ + register long __sc_ret __asm__ ("r11") = name; \ + LOAD_ARGS_##nr (args) \ + __asm__ __volatile__ ("l.sys 1" \ + : "=r" (__sc_ret) ASM_ARGS_OUT_##nr \ + : "0" (__sc_ret) ASM_ARGS_IN_##nr \ + : ASM_CLOBBERS_##nr \ + "r12", "r13", "r15", "r17", "r19", \ + "r21", "r23", "r25", "r27", "r29", \ + "r31"); \ + __asm__ __volatile__ ("l.nop"); \ + __sys_result = __sc_ret; \ + } \ + (long) __sys_result; }) + +/* : "0", "1", "2", "3", "4", "5", "6", \ */ +/* : ASM_CLOBBERS_##nr, \ */ + +#define LOAD_ARGS_0() + +#define ASM_ARGS_OUT_0 +#define ASM_ARGS_IN_0 +#define ASM_CLOBBERS_0 "r3", ASM_CLOBBERS_1 + +#define LOAD_ARGS_1(a) \ + LOAD_ARGS_0 () \ + register long __a __asm__ ("r3") = (long)(a); +#define ASM_ARGS_OUT_1 ASM_ARGS_OUT_0, "=r" (__a) +#define ASM_ARGS_IN_1 ASM_ARGS_IN_0, "1" (__a) +#define ASM_CLOBBERS_1 "r4", ASM_CLOBBERS_2 + +#define LOAD_ARGS_2(a, b) \ + LOAD_ARGS_1 (a) \ + register long __b __asm__ ("r4") = (long)(b); +#define ASM_ARGS_OUT_2 ASM_ARGS_OUT_1, "=r" (__b) +#define ASM_ARGS_IN_2 ASM_ARGS_IN_1, "2" (__b) +#define ASM_CLOBBERS_2 "r5", ASM_CLOBBERS_3 + +#define LOAD_ARGS_3(a, b, c) \ + LOAD_ARGS_2 (a, b) \ + register long __c __asm__ ("r5") = (long)(c); +#define ASM_ARGS_OUT_3 ASM_ARGS_OUT_2, "=r" (__c) +#define ASM_ARGS_IN_3 ASM_ARGS_IN_2, "3" (__c) +#define ASM_CLOBBERS_3 "r6", ASM_CLOBBERS_4 + +#define LOAD_ARGS_4(a, b, c, d) \ + LOAD_ARGS_3 (a, b, c) \ + register long __d __asm__ ("r6") = (long)(d); +#define ASM_ARGS_OUT_4 ASM_ARGS_OUT_3, "=r" (__d) +#define ASM_ARGS_IN_4 ASM_ARGS_IN_3, "4" (__d) +#define ASM_CLOBBERS_4 "r7", ASM_CLOBBERS_5 + +#define LOAD_ARGS_5(a, b, c, d, e) \ + LOAD_ARGS_4 (a, b, c, d) \ + register long __e __asm__ ("r7") = (long)(e); +#define ASM_ARGS_OUT_5 ASM_ARGS_OUT_4, "=r" (__e) +#define ASM_ARGS_IN_5 ASM_ARGS_IN_4, "5" (__e) +#define ASM_CLOBBERS_5 "r8", ASM_CLOBBERS_6 + +#define LOAD_ARGS_6(a, b, c, d, e, f) \ + LOAD_ARGS_5 (a, b, c, d, e) \ + register long __f __asm__ ("r8") = (long)(f); +#define ASM_ARGS_OUT_6 ASM_ARGS_OUT_5, "=r" (__f) +#define ASM_ARGS_IN_6 ASM_ARGS_IN_5, "6" (__f) +#define ASM_CLOBBERS_6 + +#endif /* __ASSEMBLER__ */ +#endif /* _BITS_SYSCALLS_H */ diff --git a/libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h b/libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h new file mode 100644 index 0000000..30ae443 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h @@ -0,0 +1,44 @@ +/* + * Track misc arch-specific features that aren't config options + */ + +#ifndef _BITS_UCLIBC_ARCH_FEATURES_H +#define _BITS_UCLIBC_ARCH_FEATURES_H + +#undef _ERRNO_H +#undef EDEADLOCK /*Use Linux*/ + +/* instruction used when calling abort() to kill yourself */ +#define __UCLIBC_ABORT_INSTRUCTION__ ".long 0xbfffffff" + +/* can your target use syscall6() for mmap ? */ +#define __UCLIBC_MMAP_HAS_6_ARGS__ + +/* does your target use syscall4() for truncate64 ? (32bit arches only) */ +#undef __UCLIBC_TRUNCATE64_HAS_4_ARGS__ + +/* does your target have a broken create_module() ? */ +#undef __UCLIBC_BROKEN_CREATE_MODULE__ + +/* does your target have to worry about older [gs]etrlimit() ? */ +#undef __UCLIBC_HANDLE_OLDER_RLIMIT__ + +/* does your target have an asm .set ? */ +#define __UCLIBC_HAVE_ASM_SET_DIRECTIVE__ + +/* define if target doesn't like .global */ +#undef __UCLIBC_ASM_GLOBAL_DIRECTIVE__ + +/* define if target supports .weak */ +#define __UCLIBC_HAVE_ASM_WEAK_DIRECTIVE__ + +/* define if target supports .weakext */ +#undef __UCLIBC_HAVE_ASM_WEAKEXT_DIRECTIVE__ + +/* needed probably only for ppc64 */ +#undef __UCLIBC_HAVE_ASM_GLOBAL_DOT_NAME__ + +/* define if target supports IEEE signed zero floats */ +#define __UCLIBC_HAVE_SIGNED_ZERO__ + +#endif /* _BITS_UCLIBC_ARCH_FEATURES_H */ diff --git a/libc/sysdeps/linux/or1k/bits/uClibc_page.h b/libc/sysdeps/linux/or1k/bits/uClibc_page.h new file mode 100644 index 0000000..80c3bd9 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/uClibc_page.h @@ -0,0 +1,35 @@ +/* Copyright (C) 2004 Erik Andersen + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * The GNU C Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with the GNU C Library; if not, write to the Free + * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA. + */ + +/* Supply an architecture specific value for PAGE_SIZE and friends. */ + +#ifndef _UCLIBC_PAGE_H +#define _UCLIBC_PAGE_H + +/* PAGE_SHIFT determines the page size -- in this case 4096 */ +#define PAGE_SHIFT 13 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* Some architectures always use 12 as page shift for mmap2() eventhough the + * real PAGE_SHIFT != 12. Other architectures use the same value as + * PAGE_SHIFT... + */ +#define MMAP2_PAGE_SHIFT PAGE_SHIFT + +#endif /* _UCLIBC_PAGE_H */ diff --git a/libc/sysdeps/linux/metag/bits/wordsize.h b/libc/sysdeps/linux/or1k/bits/wordsize.h similarity index 100% copy from libc/sysdeps/linux/metag/bits/wordsize.h copy to libc/sysdeps/linux/or1k/bits/wordsize.h diff --git a/libc/sysdeps/linux/or1k/brk.c b/libc/sysdeps/linux/or1k/brk.c new file mode 100644 index 0000000..f8183db --- /dev/null +++ b/libc/sysdeps/linux/or1k/brk.c @@ -0,0 +1,23 @@ +/* From libc-5.3.12 */ + +#include <errno.h> +#include <unistd.h> +#include <sys/syscall.h> +libc_hidden_proto(brk) +extern void * ___brk_addr; + +extern int __init_brk (void); +extern void *_brk(void *ptr); + +int brk(void * end_data_seg) +{ + if (__init_brk () == 0) + { + ___brk_addr = _brk(end_data_seg); + if (___brk_addr == end_data_seg) + return 0; + __set_errno(ENOMEM); + } + return -1; +} +libc_hidden_def(brk) diff --git a/libc/sysdeps/linux/or1k/clone.c b/libc/sysdeps/linux/or1k/clone.c new file mode 100644 index 0000000..ebb048a --- /dev/null +++ b/libc/sysdeps/linux/or1k/clone.c @@ -0,0 +1,88 @@ +/* + * clone syscall for OpenRISC + * + * Copyright (c) 2010 Jonas Bonn <jonas(a)southpole.se> + * Copyright (C) 2003 John Williams <jwilliams(a)itee.uq.edu.au> + * Copyright (C) 2002,03 NEC Electronics Corporation + * Copyright (C) 2002,03 Miles Bader <miles(a)gnu.org> + * + * This file is subject to the terms and conditions of the GNU Lesser + * General Public License. See the file COPYING.LIB in the main + * directory of this archive for more details. + * + * OpenRISC port by Jonas Bonn <jonas(a)southpole.se> + */ + +#include <errno.h> +#include <sys/syscall.h> +#include <sched.h> +#include <unistd.h> + +/* The userland implementation is: + int clone (int (*fn)(void *arg), void *child_stack, int flags, void *arg, ...) + the kernel entry is: + int clone (long flags, void *child_stack) +*/ + +int +clone (int (*fn)(void *arg), void *child_stack, int flags, void *arg, ...) +{ + int err; + + /* OK, here's the skinny on this one... + * OR1K GCC does weird things with varargs functions... the last + * parameter is NEVER passed on the stack -- i.e. arg, in this case. + * So we need to push at least 'arg' onto the child stack so that + * the new thread can find it. Just to be totally safe, we'll + * push both 'fn' and 'arg'; that way we don't need to care what + * GCC does with parameters, whether they are passed in registers + * or on stack. + */ + + /* Put 'fn' and 'arg' on child stack */ + __asm__ __volatile__ ( + "l.sw -4(%0),%1;" + "l.sw -8(%0),%2;" + : + : "r" (child_stack), "r" (fn), "r" (arg) + ); + + /* Sanity check the arguments */ + err = -EINVAL; + if (!fn) + goto syscall_error; + if (!child_stack) + goto syscall_error; + + err = INLINE_SYSCALL(clone, 2, flags, child_stack); + + /* NB: from here you are in child thread or parent thread. + * + * Do not use any functions here that may write data _up_ + * onto the stack because they will overwrite the child's + * thread descriptor... i.e. don't use printf + */ + + if (err < 0) + goto syscall_error; + else if (err != 0) { + return err; + } + + /* NB: from here you exclusively in child thread */ + + /* Grab 'fn' and 'arg' from child stack */ + __asm__ __volatile__ ( + "l.lwz %0,-4(%2);" + "l.lwz %1,-8(%2);" + : "=&r" (fn), "=r" (arg) + : "r" (child_stack) + : "0", "1" + ); + + _exit(fn(arg)); + +syscall_error: + __set_errno (-err); + return -1; +} diff --git a/libc/sysdeps/linux/or1k/crt1.S b/libc/sysdeps/linux/or1k/crt1.S new file mode 100644 index 0000000..c1926be --- /dev/null +++ b/libc/sysdeps/linux/or1k/crt1.S @@ -0,0 +1,144 @@ +/* Copyright (C) 1995, 1996, 1997, 1998, 2001, 2002, 2005 + Free Software Foundation, Inc. + + Copyright (C) 2010 Embecosm Limited + + Contributor Jeremy Bennett <jeremy.bennett(a)embecosm.com> + Contributor Joern Rennecke <joern.rennecke(a)embecosm.com> + With other contributions from the OpenCores community. + + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file with other + programs, and to distribute those programs without any restriction + coming from the use of this file. (The GNU Lesser General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into another program.) + + Note that people who make modified versions of this file are not + obligated to grant this special exception for their modified + versions; it is their choice whether to do so. The GNU Lesser + General Public License gives permission to release a modified + version without this exception; this exception also makes it + possible to release a modified version which carries forward this + exception. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* Stick in a dummy reference to main(), so that if an application + * is linking when the main() function is in a static library (.a) + * we can be sure that main() actually gets linked in */ +.type main,%function + +/* This is the canonical entry point, usually the first thing in the text + segment. + + sp The stack contains the arguments and environment: + 0(sp) argc + 4(sp) argv[0] + ... + (4*argc)(sp) NULL + (4*(argc+1))(sp) envp[0] + ... + NULL +*/ + +#include <features.h> + +.text + .globl _start + .type _start,%function + +.global _start +_start: + +#ifdef __PIC__ + /* Obtain a pointer to .got in r16 */ + l.jal .LPC0 +#ifndef __OR1K_NODELAY__ + l.nop +#endif +.LPC0: + l.movhi r16, gotpchi(_GLOBAL_OFFSET_TABLE_+(.-.LPC0)) + l.ori r16, r16, gotpclo(_GLOBAL_OFFSET_TABLE_+(.-.LPC0)) + l.add r16, r16, r9 +#endif + + /* Push stack limit onto the stack */ + /* Provides highest stack address to user code (as stack grows + * downwards + * This is the seventh argument to __uClibc_main and thus needs to + * be passed on the stack + */ + l.sw -4(r1),r1 + + /* Take values for argc and argv off the stack. + * These will be passed as arguments two and three to __uClibc_main + * and thus go in registers r4 and r5, respectively + */ + l.lwz r4,0(r1) + l.addi r5,r1,4 + +#ifdef __PIC__ + l.lwz r3,got(main)(r16) +#else + l.movhi r3,hi(main) + l.ori r3,r3,lo(main) +#endif + + /* Put the constructor and destructor initialization as args four and + five into r6 and r7 */ +#ifdef __PIC__ + l.lwz r6, got(_init)(r16) + l.lwz r7, got(_fini)(r16) +#else + l.movhi r6,hi(_init) + l.ori r6,r6,lo(_init) + l.movhi r7,hi(_fini) + l.ori r7,r7,lo(_fini) +#endif + + /* rtld_fini = NULL */ + l.movhi r8, 0 + + /* Adjust stack to account for a total of 7 args (i.e. the last one is + on the stack. */ + l.addi r1,r1,-4 + + /* Clear the frame pointer and link register since this is the + * outermost frame. + */ + l.add r2,r0,r0 + l.add r9,r0,r0 + + /* Let the libc call main and exit with its return code. */ +#ifdef __PIC__ + l.j plt(__uClibc_main) +#else + l.j __uClibc_main +#endif + l.nop + +/* Define a symbol for the first piece of initialized data. */ + .data + .globl __data_start +__data_start: + .long 0 + .weak data_start + data_start = __data_start diff --git a/libc/sysdeps/linux/or1k/crti.S b/libc/sysdeps/linux/or1k/crti.S new file mode 100644 index 0000000..a96476b --- /dev/null +++ b/libc/sysdeps/linux/or1k/crti.S @@ -0,0 +1,11 @@ + .section .init + .global _init +_init: + l.addi r1,r1,-4 + l.sw 0(r1),r9 + + .section .fini + .global _fini +_fini: + l.addi r1,r1,-4 + l.sw 0(r1),r9 diff --git a/libc/sysdeps/linux/or1k/crtn.S b/libc/sysdeps/linux/or1k/crtn.S new file mode 100644 index 0000000..b3e8688 --- /dev/null +++ b/libc/sysdeps/linux/or1k/crtn.S @@ -0,0 +1,9 @@ + .section .init + l.lwz r9,0(r1) + l.jr r9 + l.addi r1,r1,4 + + .section .fini + l.lwz r9,0(r1) + l.jr r9 + l.addi r1,r1,4 diff --git a/libc/sysdeps/linux/or1k/jmpbuf-offsets.h b/libc/sysdeps/linux/or1k/jmpbuf-offsets.h new file mode 100644 index 0000000..8cd82a1 --- /dev/null +++ b/libc/sysdeps/linux/or1k/jmpbuf-offsets.h @@ -0,0 +1,8 @@ +#include <features.h> + +#define JB_SR 0 +#define JB_GPRS 1 +#define JB_SP 1 +#define JB_LR 9 +#define JB_RV 11 +#define JB_SIZE (32*4) diff --git a/libc/sysdeps/linux/or1k/jmpbuf-unwind.h b/libc/sysdeps/linux/or1k/jmpbuf-unwind.h new file mode 100644 index 0000000..436073b --- /dev/null +++ b/libc/sysdeps/linux/or1k/jmpbuf-unwind.h @@ -0,0 +1,24 @@ +/* Copyright (C) 2005,2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library. If not, see + <http://www.gnu.org/licenses/>. */ + +#include <setjmp.h> +#include <jmpbuf-offsets.h> + +/* Test if longjmp to JMPBUF would unwind the frame + containing a local variable at ADDRESS. */ +#define _JMPBUF_UNWINDS(jmpbuf, address) \ + ((void *) (address) < (void *) (jmpbuf)[JB_SP]) diff --git a/libc/sysdeps/linux/or1k/sbrk.c b/libc/sysdeps/linux/or1k/sbrk.c new file mode 100644 index 0000000..bd0635f --- /dev/null +++ b/libc/sysdeps/linux/or1k/sbrk.c @@ -0,0 +1,27 @@ +/* From libc-5.3.12 */ + +#include <errno.h> +#include <unistd.h> +#include <sys/syscall.h> +libc_hidden_proto(sbrk) + +extern void * ___brk_addr; + +extern int __init_brk (void); +extern void *_brk(void *ptr); + +void * +sbrk(intptr_t increment) +{ + if (__init_brk () == 0) + { + char * tmp = (char*)___brk_addr+increment; + ___brk_addr = _brk(tmp); + if (___brk_addr == tmp) + return tmp-increment; + __set_errno(ENOMEM); + return ((void *) -1); + } + return ((void *) -1); +} +libc_hidden_def(sbrk) diff --git a/libc/sysdeps/linux/or1k/setjmp.S b/libc/sysdeps/linux/or1k/setjmp.S new file mode 100644 index 0000000..2814f2f --- /dev/null +++ b/libc/sysdeps/linux/or1k/setjmp.S @@ -0,0 +1,96 @@ +/* setjmp for or1k + + Based on: + setjmp for PowerPC. + Copyright (C) 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include "spr_defs.h" +#include <jmpbuf-offsets.h> + +#ifdef __UCLIBC_HAS_FLOATS__ +#define FP(x...) x +#else +#define FP(x...) +#endif + +.globl _setjmp +.type _setjmp, @function +.align 2 + +_setjmp: + l.addi r4,r0,0 /* Set second argument to 0. */ + l.j .Local_sigsetjmp + l.nop +.size _setjmp,.-_setjmp + +.globl __setjmp +.type __setjmp, @function +.align 2 + +__setjmp: + l.addi r4,r0,1 /* Set second argument to 1. */ + l.j .Local_sigsetjmp + l.nop +.size __setjmp,.-__setjmp + +.globl setjmp +.set setjmp,__setjmp + +.globl __sigsetjmp +.type __sigsetjmp, @function +.align 2 + +__sigsetjmp: +.Local_sigsetjmp: +# l.mfspr r11,r0,SPR_SR +# l.sw (JB_SR*4)(r3),r11 + l.sw ((JB_GPRS+0)*4)(r3),r1 + l.sw ((JB_GPRS+1)*4)(r3),r2 +/* l.sw ((JB_GPRS+2)*4)(r3),r3*/ + l.sw ((JB_GPRS+3)*4)(r3),r4 + l.sw ((JB_GPRS+4)*4)(r3),r5 + l.sw ((JB_GPRS+5)*4)(r3),r6 + l.sw ((JB_GPRS+6)*4)(r3),r7 + l.sw ((JB_GPRS+7)*4)(r3),r8 + l.sw ((JB_GPRS+8)*4)(r3),r9 + l.sw ((JB_GPRS+9)*4)(r3),r10 + l.sw ((JB_GPRS+10)*4)(r3),r11 + l.sw ((JB_GPRS+11)*4)(r3),r12 + l.sw ((JB_GPRS+12)*4)(r3),r13 + l.sw ((JB_GPRS+13)*4)(r3),r14 + l.sw ((JB_GPRS+14)*4)(r3),r15 + l.sw ((JB_GPRS+15)*4)(r3),r16 + l.sw ((JB_GPRS+16)*4)(r3),r17 + l.sw ((JB_GPRS+17)*4)(r3),r18 + l.sw ((JB_GPRS+18)*4)(r3),r19 + l.sw ((JB_GPRS+19)*4)(r3),r20 + l.sw ((JB_GPRS+20)*4)(r3),r21 + l.sw ((JB_GPRS+21)*4)(r3),r22 + l.sw ((JB_GPRS+22)*4)(r3),r23 + l.sw ((JB_GPRS+23)*4)(r3),r24 + l.sw ((JB_GPRS+24)*4)(r3),r25 + l.sw ((JB_GPRS+25)*4)(r3),r26 + l.sw ((JB_GPRS+26)*4)(r3),r27 + l.sw ((JB_GPRS+27)*4)(r3),r28 + l.sw ((JB_GPRS+28)*4)(r3),r29 + l.sw ((JB_GPRS+29)*4)(r3),r30 + l.sw ((JB_GPRS+30)*4)(r3),r31 + l.j __sigjmp_save + l.nop +.size __sigsetjmp,.-__sigsetjmp diff --git a/libc/sysdeps/linux/or1k/spr_defs.h b/libc/sysdeps/linux/or1k/spr_defs.h new file mode 100644 index 0000000..263d3e4 --- /dev/null +++ b/libc/sysdeps/linux/or1k/spr_defs.h @@ -0,0 +1,429 @@ +/* spr_defs.h -- Defines OR1K architecture specific special-purpose registers + Copyright (C) 1999 Damjan Lampret, lampret(a)opencores.org + +This file is part of OpenRISC 1000 Architectural Simulator. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* This file is also used by microkernel test bench. Among +others it is also used in assembly file(s). */ + +/* Definition of special-purpose registers (SPRs) */ + +#define MAX_GRPS (32) +#define MAX_SPRS_PER_GRP_BITS (11) +#define MAX_SPRS_PER_GRP (1 << MAX_SPRS_PER_GRP_BITS) +#define MAX_SPRS (0x10000) + +/* Base addresses for the groups */ +#define SPRGROUP_SYS (0<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_DMMU (1<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_IMMU (2<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_DC (3<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_IC (4<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_MAC (5<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_D (6<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_PC (7<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_PM (8<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_PIC (9<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_TT (10<< MAX_SPRS_PER_GRP_BITS) + +/* System control and status group */ +#define SPR_VR (SPRGROUP_SYS + 0) +#define SPR_UPR (SPRGROUP_SYS + 1) +#define SPR_CPUCFGR (SPRGROUP_SYS + 2) +#define SPR_DMMUCFGR (SPRGROUP_SYS + 3) +#define SPR_IMMUCFGR (SPRGROUP_SYS + 4) +#define SPR_DCCFGR (SPRGROUP_SYS + 5) +#define SPR_ICCFGR (SPRGROUP_SYS + 6) +#define SPR_DCFGR (SPRGROUP_SYS + 7) +#define SPR_PCCFGR (SPRGROUP_SYS + 8) +#define SPR_NPC (SPRGROUP_SYS + 16) /* CZ 21/06/01 */ +#define SPR_SR (SPRGROUP_SYS + 17) /* CZ 21/06/01 */ +#define SPR_PPC (SPRGROUP_SYS + 18) /* CZ 21/06/01 */ +#define SPR_EPCR_BASE (SPRGROUP_SYS + 32) /* CZ 21/06/01 */ +#define SPR_EPCR_LAST (SPRGROUP_SYS + 47) /* CZ 21/06/01 */ +#define SPR_EEAR_BASE (SPRGROUP_SYS + 48) +#define SPR_EEAR_LAST (SPRGROUP_SYS + 63) +#define SPR_ESR_BASE (SPRGROUP_SYS + 64) +#define SPR_ESR_LAST (SPRGROUP_SYS + 79) + +/* Data MMU group */ +#define SPR_DMMUCR (SPRGROUP_DMMU + 0) +#define SPR_DTLBMR_BASE(WAY) (SPRGROUP_DMMU + 0x200 + (WAY) * 0x100) +#define SPR_DTLBMR_LAST(WAY) (SPRGROUP_DMMU + 0x27f + (WAY) * 0x100) +#define SPR_DTLBTR_BASE(WAY) (SPRGROUP_DMMU + 0x280 + (WAY) * 0x100) +#define SPR_DTLBTR_LAST(WAY) (SPRGROUP_DMMU + 0x2ff + (WAY) * 0x100) + +/* Instruction MMU group */ +#define SPR_IMMUCR (SPRGROUP_IMMU + 0) +#define SPR_ITLBMR_BASE(WAY) (SPRGROUP_IMMU + 0x200 + (WAY) * 0x100) +#define SPR_ITLBMR_LAST(WAY) (SPRGROUP_IMMU + 0x27f + (WAY) * 0x100) +#define SPR_ITLBTR_BASE(WAY) (SPRGROUP_IMMU + 0x280 + (WAY) * 0x100) +#define SPR_ITLBTR_LAST(WAY) (SPRGROUP_IMMU + 0x2ff + (WAY) * 0x100) + +/* Data cache group */ +#define SPR_DCCR (SPRGROUP_DC + 0) +#define SPR_DCBPR (SPRGROUP_DC + 1) +#define SPR_DCBFR (SPRGROUP_DC + 2) +#define SPR_DCBIR (SPRGROUP_DC + 3) +#define SPR_DCBWR (SPRGROUP_DC + 4) +#define SPR_DCBLR (SPRGROUP_DC + 5) +#define SPR_DCR_BASE(WAY) (SPRGROUP_DC + 0x200 + (WAY) * 0x200) +#define SPR_DCR_LAST(WAY) (SPRGROUP_DC + 0x3ff + (WAY) * 0x200) + +/* Instruction cache group */ +#define SPR_ICCR (SPRGROUP_IC + 0) +#define SPR_ICBPR (SPRGROUP_IC + 1) +#define SPR_ICBIR (SPRGROUP_IC + 2) +#define SPR_ICBLR (SPRGROUP_IC + 3) +#define SPR_ICR_BASE(WAY) (SPRGROUP_IC + 0x200 + (WAY) * 0x200) +#define SPR_ICR_LAST(WAY) (SPRGROUP_IC + 0x3ff + (WAY) * 0x200) + +/* MAC group */ +#define SPR_MACLO (SPRGROUP_MAC + 1) +#define SPR_MACHI (SPRGROUP_MAC + 2) + +/* Debug group */ +#define SPR_DVR(N) (SPRGROUP_D + (N)) +#define SPR_DCR(N) (SPRGROUP_D + 8 + (N)) +#define SPR_DMR1 (SPRGROUP_D + 16) +#define SPR_DMR2 (SPRGROUP_D + 17) +#define SPR_DWCR0 (SPRGROUP_D + 18) +#define SPR_DWCR1 (SPRGROUP_D + 19) +#define SPR_DSR (SPRGROUP_D + 20) +#define SPR_DRR (SPRGROUP_D + 21) + +/* Performance counters group */ +#define SPR_PCCR(N) (SPRGROUP_PC + (N)) +#define SPR_PCMR(N) (SPRGROUP_PC + 8 + (N)) + +/* Power management group */ +#define SPR_PMR (SPRGROUP_PM + 0) + +/* PIC group */ +#define SPR_PICMR (SPRGROUP_PIC + 0) +#define SPR_PICPR (SPRGROUP_PIC + 1) +#define SPR_PICSR (SPRGROUP_PIC + 2) + +/* Tick Timer group */ +#define SPR_TTMR (SPRGROUP_TT + 0) +#define SPR_TTCR (SPRGROUP_TT + 1) + +/* + * Bit definitions for the Version Register + * + */ +#define SPR_VR_VER 0xffff0000 /* Processor version */ +#define SPR_VR_REV 0x0000003f /* Processor revision */ + +/* + * Bit definitions for the Unit Present Register + * + */ +#define SPR_UPR_UP 0x00000001 /* UPR present */ +#define SPR_UPR_DCP 0x00000002 /* Data cache present */ +#define SPR_UPR_ICP 0x00000004 /* Instruction cache present */ +#define SPR_UPR_DMP 0x00000008 /* Data MMU present */ +#define SPR_UPR_IMP 0x00000010 /* Instruction MMU present */ +#define SPR_UPR_OB32P 0x00000020 /* ORBIS32 present */ +#define SPR_UPR_OB64P 0x00000040 /* ORBIS64 present */ +#define SPR_UPR_OF32P 0x00000080 /* ORFPX32 present */ +#define SPR_UPR_OF64P 0x00000100 /* ORFPX64 present */ +#define SPR_UPR_OV32P 0x00000200 /* ORVDX32 present */ +#define SPR_UPR_OV64P 0x00000400 /* ORVDX64 present */ +#define SPR_UPR_DUP 0x00000800 /* Debug unit present */ +#define SPR_UPR_PCUP 0x00001000 /* Performance counters unit present */ +#define SPR_UPR_PMP 0x00002000 /* Power management present */ +#define SPR_UPR_PICP 0x00004000 /* PIC present */ +#define SPR_UPR_TTP 0x00008000 /* Tick timer present */ +#define SPR_UPR_SRP 0x00010000 /* Shadow registers present */ +#define SPR_UPR_RES 0x00fe0000 /* ORVDX32 present */ +#define SPR_UPR_CUST 0xff000000 /* Custom units */ + +/* + * Bit definitions for the Supervision Register + * + */ +#define SPR_SR_CID 0xf0000000 /* Context ID */ +#define SPR_SR_SUMRA 0x00010000 /* Supervisor SPR read access */ +#define SPR_SR_FO 0x00008000 /* Fixed one */ +#define SPR_SR_EPH 0x00004000 /* Exception Prefix High */ +#define SPR_SR_DSX 0x00002000 /* Delay Slot Exception */ +#define SPR_SR_OVE 0x00001000 /* Overflow flag Exception */ +#define SPR_SR_OV 0x00000800 /* Overflow flag */ +#define SPR_SR_CY 0x00000400 /* Carry flag */ +#define SPR_SR_F 0x00000200 /* Condition Flag */ +#define SPR_SR_CE 0x00000100 /* CID Enable */ +#define SPR_SR_LEE 0x00000080 /* Little Endian Enable */ +#define SPR_SR_IME 0x00000040 /* Instruction MMU Enable */ +#define SPR_SR_DME 0x00000020 /* Data MMU Enable */ +#define SPR_SR_ICE 0x00000010 /* Instruction Cache Enable */ +#define SPR_SR_DCE 0x00000008 /* Data Cache Enable */ +#define SPR_SR_IEE 0x00000004 /* Interrupt Exception Enable */ +#define SPR_SR_TEE 0x00000002 /* Tick timer Exception Enable */ +#define SPR_SR_SM 0x00000001 /* Supervisor Mode */ + +/* + * Bit definitions for the Data MMU Control Register + * + */ +#define SPR_DMMUCR_P2S 0x0000003e /* Level 2 Page Size */ +#define SPR_DMMUCR_P1S 0x000007c0 /* Level 1 Page Size */ +#define SPR_DMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */ +#define SPR_DMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */ + +/* + * Bit definitions for the Instruction MMU Control Register + * + */ +#define SPR_IMMUCR_P2S 0x0000003e /* Level 2 Page Size */ +#define SPR_IMMUCR_P1S 0x000007c0 /* Level 1 Page Size */ +#define SPR_IMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */ +#define SPR_IMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */ + +/* + * Bit definitions for the Data TLB Match Register + * + */ +#define SPR_DTLBMR_V 0x00000001 /* Valid */ +#define SPR_DTLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */ +#define SPR_DTLBMR_CID 0x0000003c /* Context ID */ +#define SPR_DTLBMR_LRU 0x000000c0 /* Least Recently Used */ +#define SPR_DTLBMR_VPN 0xfffff000 /* Virtual Page Number */ + +/* + * Bit definitions for the Data TLB Translate Register + * + */ +#define SPR_DTLBTR_CC 0x00000001 /* Cache Coherency */ +#define SPR_DTLBTR_CI 0x00000002 /* Cache Inhibit */ +#define SPR_DTLBTR_WBC 0x00000004 /* Write-Back Cache */ +#define SPR_DTLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */ +#define SPR_DTLBTR_A 0x00000010 /* Accessed */ +#define SPR_DTLBTR_D 0x00000020 /* Dirty */ +#define SPR_DTLBTR_URE 0x00000040 /* User Read Enable */ +#define SPR_DTLBTR_UWE 0x00000080 /* User Write Enable */ +#define SPR_DTLBTR_SRE 0x00000100 /* Supervisor Read Enable */ +#define SPR_DTLBTR_SWE 0x00000200 /* Supervisor Write Enable */ +#define SPR_DTLBTR_PPN 0xfffff000 /* Physical Page Number */ + +/* + * Bit definitions for the Instruction TLB Match Register + * + */ +#define SPR_ITLBMR_V 0x00000001 /* Valid */ +#define SPR_ITLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */ +#define SPR_ITLBMR_CID 0x0000003c /* Context ID */ +#define SPR_ITLBMR_LRU 0x000000c0 /* Least Recently Used */ +#define SPR_ITLBMR_VPN 0xfffff000 /* Virtual Page Number */ + +/* + * Bit definitions for the Instruction TLB Translate Register + * + */ +#define SPR_ITLBTR_CC 0x00000001 /* Cache Coherency */ +#define SPR_ITLBTR_CI 0x00000002 /* Cache Inhibit */ +#define SPR_ITLBTR_WBC 0x00000004 /* Write-Back Cache */ +#define SPR_ITLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */ +#define SPR_ITLBTR_A 0x00000010 /* Accessed */ +#define SPR_ITLBTR_D 0x00000020 /* Dirty */ +#define SPR_ITLBTR_SXE 0x00000040 /* User Read Enable */ +#define SPR_ITLBTR_UXE 0x00000080 /* User Write Enable */ +#define SPR_ITLBTR_PPN 0xfffff000 /* Physical Page Number */ + +/* + * Bit definitions for Data Cache Control register + * + */ +#define SPR_DCCR_EW 0x000000ff /* Enable ways */ + +/* + * Bit definitions for Insn Cache Control register + * + */ +#define SPR_ICCR_EW 0x000000ff /* Enable ways */ + +/* + * Bit definitions for Debug Control registers + * + */ +#define SPR_DCR_DP 0x00000001 /* DVR/DCR present */ +#define SPR_DCR_CC 0x0000000e /* Compare condition */ +#define SPR_DCR_SC 0x00000010 /* Signed compare */ +#define SPR_DCR_CT 0x000000e0 /* Compare to */ + +/* Bit results with SPR_DCR_CC mask */ +#define SPR_DCR_CC_MASKED 0x00000000 +#define SPR_DCR_CC_EQUAL 0x00000001 +#define SPR_DCR_CC_LESS 0x00000002 +#define SPR_DCR_CC_LESSE 0x00000003 +#define SPR_DCR_CC_GREAT 0x00000004 +#define SPR_DCR_CC_GREATE 0x00000005 +#define SPR_DCR_CC_NEQUAL 0x00000006 + +/* Bit results with SPR_DCR_CT mask */ +#define SPR_DCR_CT_DISABLED 0x00000000 +#define SPR_DCR_CT_IFEA 0x00000020 +#define SPR_DCR_CT_LEA 0x00000040 +#define SPR_DCR_CT_SEA 0x00000060 +#define SPR_DCR_CT_LD 0x00000080 +#define SPR_DCR_CT_SD 0x000000a0 +#define SPR_DCR_CT_LSEA 0x000000c0 + +/* + * Bit definitions for Debug Mode 1 register + * + */ +#define SPR_DMR1_CW0 0x00000003 /* Chain watchpoint 0 */ +#define SPR_DMR1_CW1 0x0000000c /* Chain watchpoint 1 */ +#define SPR_DMR1_CW2 0x00000030 /* Chain watchpoint 2 */ +#define SPR_DMR1_CW3 0x000000c0 /* Chain watchpoint 3 */ +#define SPR_DMR1_CW4 0x00000300 /* Chain watchpoint 4 */ +#define SPR_DMR1_CW5 0x00000c00 /* Chain watchpoint 5 */ +#define SPR_DMR1_CW6 0x00003000 /* Chain watchpoint 6 */ +#define SPR_DMR1_CW7 0x0000c000 /* Chain watchpoint 7 */ +#define SPR_DMR1_CW8 0x00030000 /* Chain watchpoint 8 */ +#define SPR_DMR1_CW9 0x000c0000 /* Chain watchpoint 9 */ +#define SPR_DMR1_CW10 0x00300000 /* Chain watchpoint 10 */ +#define SPR_DMR1_ST 0x00400000 /* Single-step trace*/ +#define SPR_DMR1_BT 0x00800000 /* Branch trace */ +#define SPR_DMR1_DXFW 0x01000000 /* Disable external force watchpoint */ + +/* + * Bit definitions for Debug Mode 2 register + * + */ +#define SPR_DMR2_WCE0 0x00000001 /* Watchpoint counter 0 enable */ +#define SPR_DMR2_WCE1 0x00000002 /* Watchpoint counter 0 enable */ +#define SPR_DMR2_AWTC 0x00001ffc /* Assign watchpoints to counters */ +#define SPR_DMR2_WGB 0x00ffe000 /* Watchpoints generating breakpoint */ + +/* + * Bit definitions for Debug watchpoint counter registers + * + */ +#define SPR_DWCR_COUNT 0x0000ffff /* Count */ +#define SPR_DWCR_MATCH 0xffff0000 /* Match */ + +/* + * Bit definitions for Debug stop register + * + */ +#define SPR_DSR_RSTE 0x00000001 /* Reset exception */ +#define SPR_DSR_BUSEE 0x00000002 /* Bus error exception */ +#define SPR_DSR_DPFE 0x00000004 /* Data Page Fault exception */ +#define SPR_DSR_IPFE 0x00000008 /* Insn Page Fault exception */ +#define SPR_DSR_TTE 0x00000010 /* iTick Timer exception */ +#define SPR_DSR_AE 0x00000020 /* Alignment exception */ +#define SPR_DSR_IIE 0x00000040 /* Illegal Instruction exception */ +#define SPR_DSR_IE 0x00000080 /* Interrupt exception */ +#define SPR_DSR_DME 0x00000100 /* DTLB miss exception */ +#define SPR_DSR_IME 0x00000200 /* ITLB miss exception */ +#define SPR_DSR_RE 0x00000400 /* Range exception */ +#define SPR_DSR_SCE 0x00000800 /* System call exception */ +#define SPR_DSR_SSE 0x00001000 /* Single Step Exception */ +#define SPR_DSR_TE 0x00002000 /* Trap exception */ + +/* + * Bit definitions for Debug reason register + * + */ +#define SPR_DRR_RSTE 0x00000001 /* Reset exception */ +#define SPR_DRR_BUSEE 0x00000002 /* Bus error exception */ +#define SPR_DRR_DPFE 0x00000004 /* Data Page Fault exception */ +#define SPR_DRR_IPFE 0x00000008 /* Insn Page Fault exception */ +#define SPR_DRR_TTE 0x00000010 /* Tick Timer exception */ +#define SPR_DRR_AE 0x00000020 /* Alignment exception */ +#define SPR_DRR_IIE 0x00000040 /* Illegal Instruction exception */ +#define SPR_DRR_IE 0x00000080 /* Interrupt exception */ +#define SPR_DRR_DME 0x00000100 /* DTLB miss exception */ +#define SPR_DRR_IME 0x00000200 /* ITLB miss exception */ +#define SPR_DRR_RE 0x00000400 /* Range exception */ +#define SPR_DRR_SCE 0x00000800 /* System call exception */ +#define SPR_DRR_TE 0x00001000 /* Trap exception */ + +/* + * Bit definitions for Performance counters mode registers + * + */ +#define SPR_PCMR_CP 0x00000001 /* Counter present */ +#define SPR_PCMR_UMRA 0x00000002 /* User mode read access */ +#define SPR_PCMR_CISM 0x00000004 /* Count in supervisor mode */ +#define SPR_PCMR_CIUM 0x00000008 /* Count in user mode */ +#define SPR_PCMR_LA 0x00000010 /* Load access event */ +#define SPR_PCMR_SA 0x00000020 /* Store access event */ +#define SPR_PCMR_IF 0x00000040 /* Instruction fetch event*/ +#define SPR_PCMR_DCM 0x00000080 /* Data cache miss event */ +#define SPR_PCMR_ICM 0x00000100 /* Insn cache miss event */ +#define SPR_PCMR_IFS 0x00000200 /* Insn fetch stall event */ +#define SPR_PCMR_LSUS 0x00000400 /* LSU stall event */ +#define SPR_PCMR_BS 0x00000800 /* Branch stall event */ +#define SPR_PCMR_DTLBM 0x00001000 /* DTLB miss event */ +#define SPR_PCMR_ITLBM 0x00002000 /* ITLB miss event */ +#define SPR_PCMR_DDS 0x00004000 /* Data dependency stall event */ +#define SPR_PCMR_WPE 0x03ff8000 /* Watchpoint events */ + +/* + * Bit definitions for the Power management register + * + */ +#define SPR_PMR_SDF 0x0000000f /* Slow down factor */ +#define SPR_PMR_DME 0x00000010 /* Doze mode enable */ +#define SPR_PMR_SME 0x00000020 /* Sleep mode enable */ +#define SPR_PMR_DCGE 0x00000040 /* Dynamic clock gating enable */ +#define SPR_PMR_SUME 0x00000080 /* Suspend mode enable */ + +/* + * Bit definitions for PICMR + * + */ +#define SPR_PICMR_IUM 0xfffffffc /* Interrupt unmask */ + +/* + * Bit definitions for PICPR + * + */ +#define SPR_PICPR_IPRIO 0xfffffffc /* Interrupt priority */ + +/* + * Bit definitions for PICSR + * + */ +#define SPR_PICSR_IS 0xffffffff /* Interrupt status */ + +/* + * Bit definitions for Tick Timer Control Register + * + */ +#define SPR_TTCR_PERIOD 0x0fffffff /* Time Period */ +#define SPR_TTMR_PERIOD SPR_TTCR_PERIOD +#define SPR_TTMR_IP 0x10000000 /* Interrupt Pending */ +#define SPR_TTMR_IE 0x20000000 /* Interrupt Enable */ +#define SPR_TTMR_RT 0x40000000 /* Restart tick */ +#define SPR_TTMR_SR 0x80000000 /* Single run */ +#define SPR_TTMR_CR 0xc0000000 /* Continuous run */ +#define SPR_TTMR_M 0xc0000000 /* Tick mode */ + +/* + * l.nop constants + * + */ +#define NOP_NOP 0x0000 /* Normal nop instruction */ +#define NOP_EXIT 0x0001 /* End of simulation */ +#define NOP_REPORT 0x0002 /* Simple report */ +#define NOP_PRINTF 0x0003 /* Simprintf instruction */ +#define NOP_REPORT_FIRST 0x0400 /* Report with number */ +#define NOP_REPORT_LAST 0x03ff /* Report with number */ diff --git a/libc/sysdeps/linux/or1k/sys/procfs.h b/libc/sysdeps/linux/or1k/sys/procfs.h new file mode 100644 index 0000000..9d4c68f --- /dev/null +++ b/libc/sysdeps/linux/or1k/sys/procfs.h @@ -0,0 +1,116 @@ +/* Copyright (C) 1996, 1997, 1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _SYS_PROCFS_H +#define _SYS_PROCFS_H 1 + +/* This is somehow modelled after the file of the same name on SysVr4 + systems. It provides a definition of the core file format for ELF + used on Linux. */ + +#include <features.h> +#include <signal.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/ucontext.h> + +#include <asm/elf.h> + +__BEGIN_DECLS + +struct elf_siginfo + { + int si_signo; /* Signal number. */ + int si_code; /* Extra code. */ + int si_errno; /* Errno. */ + }; + + +/* Definitions to generate Intel SVR4-like core files. These mostly + have the same names as the SVR4 types with "elf_" tacked on the + front to prevent clashes with linux definitions, and the typedef + forms have been avoided. This is mostly like the SVR4 structure, + but more Linuxy, with things that Linux does not support and which + gdb doesn't really use excluded. Fields present but not used are + marked with "XXX". */ +struct elf_prstatus + { +#if 0 + long int pr_flags; /* XXX Process flags. */ + short int pr_why; /* XXX Reason for process halt. */ + short int pr_what; /* XXX More detailed reason. */ +#endif + struct elf_siginfo pr_info; /* Info associated with signal. */ + short int pr_cursig; /* Current signal. */ + unsigned long int pr_sigpend; /* Set of pending signals. */ + unsigned long int pr_sighold; /* Set of held signals. */ +#if 0 + struct sigaltstack pr_altstack; /* Alternate stack info. */ + struct sigaction pr_action; /* Signal action for current sig. */ +#endif + __pid_t pr_pid; + __pid_t pr_ppid; + __pid_t pr_pgrp; + __pid_t pr_sid; + struct timeval pr_utime; /* User time. */ + struct timeval pr_stime; /* System time. */ + struct timeval pr_cutime; /* Cumulative user time. */ + struct timeval pr_cstime; /* Cumulative system time. */ +#if 0 + long int pr_instr; /* Current instruction. */ +#endif + elf_gregset_t pr_reg; /* GP registers. */ + int pr_fpvalid; /* True if math copro being used. */ + }; + + +#define ELF_PRARGSZ (80) /* Number of chars for args */ + +struct elf_prpsinfo + { + char pr_state; /* Numeric process state. */ + char pr_sname; /* Char for pr_state. */ + char pr_zomb; /* Zombie. */ + char pr_nice; /* Nice val. */ + unsigned long int pr_flag; /* Flags. */ + __uid_t pr_uid; + __gid_t pr_gid; + __pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; + /* Lots missing */ + char pr_fname[16]; /* Filename of executable. */ + char pr_psargs[ELF_PRARGSZ]; /* Initial part of arg list. */ + }; + +/* Addresses. */ +typedef void *psaddr_t; + +/* Register sets. Linux has different names. */ +typedef elf_gregset_t prgregset_t; +typedef elf_fpregset_t prfpregset_t; + +/* We don't have any differences between processes and threads, + therefore habe only ine PID type. */ +typedef __pid_t lwpid_t; + + +typedef struct elf_prstatus prstatus_t; +typedef struct elf_prpsinfo prpsinfo_t; + +__END_DECLS + +#endif /* sys/procfs.h */ diff --git a/libc/sysdeps/linux/or1k/sys/ucontext.h b/libc/sysdeps/linux/or1k/sys/ucontext.h new file mode 100644 index 0000000..0d82cdb --- /dev/null +++ b/libc/sysdeps/linux/or1k/sys/ucontext.h @@ -0,0 +1,26 @@ +/* Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _SYS_UCONTEXT_H +#define _SYS_UCONTEXT_H 1 + +#include <features.h> +#include <signal.h> +#include <asm/ucontext.h> + +#endif /* sys/ucontext.h */ diff --git a/libpthread/linuxthreads/sysdeps/or1k/pt-machine.h b/libpthread/linuxthreads/sysdeps/or1k/pt-machine.h new file mode 100644 index 0000000..c6c8ee4 --- /dev/null +++ b/libpthread/linuxthreads/sysdeps/or1k/pt-machine.h @@ -0,0 +1,55 @@ +/* Machine-dependent pthreads configuration and inline functions. + OpenRISC version. + Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License as + published by the Free Software Foundation; either version 2.1 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#ifndef _PT_MACHINE_H +#define _PT_MACHINE_H 1 + +#include <features.h> +#include <sys/syscall.h> + +#ifndef PT_EI +# define PT_EI __extern_always_inline +#endif + +PT_EI long int testandset(int*); + +#define OR1K_ATOMIC_XCHG 1 + +PT_EI long int +testandset (int *spinlock) +{ + int err; + int oldvalue = 1; + + err = INLINE_SYSCALL(or1k_atomic, 3, OR1K_ATOMIC_XCHG, spinlock, &oldvalue); + + return (oldvalue); +} + +/* Get some notion of the current stack. Need not be exactly the top + of the stack, just something somewhere in the current frame. */ +#define CURRENT_STACK_FRAME stack_pointer() +static inline char *stack_pointer(void) +{ + unsigned long ret; + __asm__ __volatile__ ("l.ori %0, r1, 0" : "=r" (ret)); + return (char *)ret; +} +#endif /* pt-machine.h */ hooks/post-receive -- uClibc-ng - small C library for embedded systems

9 years, 5 months

uClibc-ng - small C library for embedded systems branch master updated. 916e50b36acaf1bc26fc7bd0972ac48e2ad9e2bf

by wbx＠helium.waldemar-brodkorb.de

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "uClibc-ng - small C library for embedded systems". The branch, master has been updated via 916e50b36acaf1bc26fc7bd0972ac48e2ad9e2bf (commit) via 4b936dfa7598811e02f93f167fa3df324275925c (commit) via c8ebcd79a70e6b526a3d593a22e486ff9eb5b9ef (commit) via 0034d10e136348316d1887a48eb642401e8a26c4 (commit) via acf24a86e915617809179a4284f6889d9d6d0c31 (commit) from 61a0270f022b583e746d019c07c911f66ec7a4ba (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 916e50b36acaf1bc26fc7bd0972ac48e2ad9e2bf Author: Max Filippov <jcmvbkbc(a)gmail.com> Date: Wed Sep 16 01:49:49 2015 +0300 xtensa: support call0 ABI Most changes are mechanical replacement of 'retw' instruction with 'abi_ret' macro, defined to 'retw' or 'ret' according to ABI. Assembly code that makes calls is duplicated for call0 ABI with changed register numbers for parameters/return value and call instruction. 'entry' instructions are replaced with 'abi_entry' macro. More interesting changes: - non-leaf assembly functions (e.g. _dl_tlsdesc_dynamic, _dl_linux_resolve, SYSCALL_ERROR_HANDLER, PSEUDO) now need to preserve registers around intermediate calls they make, use temporary stack frame for that; - setjmp/longjmp only need to save and restore return address, stack pointer and callee-saved registers in the jmpbuf; - __clone and syscall functions had hardcoded offsets to parameter passed on stack, on call0 ABI they don't need stack frame, so the offset is different. Replace these offsets with FRAMESIZE macro. Signed-off-by: Max Filippov <jcmvbkbc(a)gmail.com> commit 4b936dfa7598811e02f93f167fa3df324275925c Author: Yuriy Kolerov <yuriy.kolerov(a)synopsys.com> Date: Wed Sep 23 15:43:39 2015 +0300 libc: posix_fallocate must return an error number on failure posix_fallocate implementation in uClibc relies on fallocate system call - it just returns what fallocate returns. However fallocate returns -1 on failure and assigns an error number to errno variable. In the same time posix_fallocate must return an error number but not -1. What does this patch: if fallocate returns -1 then posix_fallocate returns errno. Otherwise posix_fallocate returns 0 on success. However there is a side effect - posix_fallocate sets errno on failure because fallocate does it. But POSIX does not forbid it thus it's not a problem. Signed-off-by: Yuriy Kolerov <yuriy.kolerov(a)synopsys.com> commit c8ebcd79a70e6b526a3d593a22e486ff9eb5b9ef Author: Yuriy Kolerov <yuriy.kolerov(a)synopsys.com> Date: Wed Sep 23 15:43:38 2015 +0300 libc: fix sign extension in fallocate() For common generic syscall ABI fallocate syscall handler in kernel expects a 64-bit signed arguments for offset and len. However uClibc has 2 wrappers for this syscall: fallocate and fallocate64. On 32-bit machines fallocate (not fallocate64) expects 32-bit values of offset and len. Thus in this case uClibc's fallocate must pass to the syscall those values with sign extension. High word of 64-bit value must be 0 or 0xFFFFFFFF depending on sign of the original 32-bit value (offset or len). It is how sign extansion works - all high bits of the negative value must be 1. So on 32-bit machines uClibc's fallocate does sign extension incorrectly when 32-bit values are passed (offset or len). It just fills the second word of 64-bit value by zeros. E.g. fallocate works incorrectly when offset or length is negative value - in this case kernel thinks that positive values are passed. Solution is to call fallocate64 from fallocate and pass 32-bit values of offset and len to fallocate64. off_t type is automatically converted to off64_t with an appropriate sign extension. Then fallocate64 invokes kernel's system call properly. This error is detected in LTP's test kernel/syscalls/fallocate02: ----------->8---------- fallocate(..., 1, -1024, 1024) failed, expected errno:22: TEST_ERRNO=0 fallocate(..., 1, 1024, -1024) failed, expected errno:22: TEST_ERRNO=0 fallocate(..., 1, 12288, -1024) failed, expected errno:22: TEST_ERRNO=0 fallocate(..., 1, -24576, 1024) failed, expected errno:22: TEST_ERRNO=0 ----------->8---------- fallocate does not emit an error because negative values are passed to the kernel without sign extension and kernel thinks that it got valid positive values. Signed-off-by: Yuriy Kolerov <yuriy.kolerov(a)synopsys.com> commit 0034d10e136348316d1887a48eb642401e8a26c4 Author: Yuriy Kolerov <yuriy.kolerov(a)synopsys.com> Date: Wed Sep 23 15:43:37 2015 +0300 libc: fix setting return value and errno in fallocate() fallocate system call must return 0 on success. On error, -1 is returned and errno is set to indicate the error. However there is an error in fallocate which is fixed by this patch - it does not set errno and returns invalid value on error (it returns error code instead of -1). This error is detected in LTP's test kernel/syscalls/fallocate02: ----------->8---------- fallocate(..., 1, 0, 1024) failed, expected errno:9: TEST_ERRNO=0 fallocate(..., 1, -1024, 1024) failed, expected errno:22: TEST_ERRNO=0 fallocate(..., 1, 1024, -1024) failed, expected errno:22: TEST_ERRNO=0 fallocate(..., 1, 12288, 0) failed, expected errno:22: TEST_ERRNO=0 fallocate(..., 1, 12288, -1024) failed, expected errno:22: TEST_ERRNO=0 fallocate(..., 1, -24576, 1024) failed, expected errno:22: TEST_ERRNO=0 ----------->8---------- Signed-off-by: Yuriy Kolerov <yuriy.kolerov(a)synopsys.com> commit acf24a86e915617809179a4284f6889d9d6d0c31 Author: Waldemar Brodkorb <wbx(a)openadk.org> Date: Thu Oct 8 20:28:39 2015 +0200 add new architecture support for or1k Information about Openrisc: http://opencores.org/or1k/Main_Page Integrated from: https://github.com/openrisc/uClibc-or1k ----------------------------------------------------------------------- Summary of changes: extra/Configs/Config.in | 13 +- extra/Configs/Config.or1k | 35 ++ extra/Configs/defconfigs/or1k/defconfig | 245 +++++++++++ include/elf.h | 26 +- ldso/ldso/or1k/dl-debug.h | 53 +++ ldso/ldso/or1k/dl-startup.h | 106 +++++ ldso/ldso/{avr32 => or1k}/dl-syscalls.h | 0 ldso/ldso/or1k/dl-sysdep.h | 105 +++++ ldso/ldso/or1k/elfinterp.c | 333 +++++++++++++++ ldso/ldso/or1k/resolve.S | 54 +++ ldso/ldso/xtensa/dl-startup.h | 12 + ldso/ldso/xtensa/dl-tlsdesc.S | 45 +- ldso/ldso/xtensa/resolve.S | 35 ++ libc/string/xtensa/memcpy.S | 16 +- libc/string/xtensa/memset.S | 4 +- libc/string/xtensa/strcmp.S | 20 +- libc/string/xtensa/strcpy.S | 12 +- libc/string/xtensa/strlen.S | 8 +- libc/string/xtensa/strncpy.S | 6 +- libc/sysdeps/linux/common/fallocate.c | 21 +- libc/sysdeps/linux/common/fallocate64.c | 9 +- libc/sysdeps/linux/common/posix_fallocate.c | 5 +- libc/sysdeps/linux/common/posix_fallocate64.c | 5 +- libc/sysdeps/linux/{alpha => or1k}/Makefile | 0 libc/sysdeps/linux/or1k/Makefile.arch | 9 + libc/sysdeps/linux/or1k/__init_brk.c | 28 ++ libc/sysdeps/linux/or1k/__longjmp.S | 81 ++++ .../sysdeps/linux/or1k/__syscall_error.c | 27 +- .../sysdeps/linux/or1k/bits/endian.h | 24 +- libc/sysdeps/linux/or1k/bits/fcntl.h | 236 +++++++++++ libc/sysdeps/linux/or1k/bits/kernel_stat.h | 59 +++ libc/sysdeps/linux/or1k/bits/kernel_types.h | 1 + .../sysdeps/linux/or1k/bits/machine-gmon.h | 26 +- .../sysdeps/linux/or1k/bits/setjmp.h | 27 +- .../sysdeps/linux/or1k/bits/sigcontextinfo.h | 25 +- .../sysdeps/linux/or1k/bits/stackinfo.h | 25 +- libc/sysdeps/linux/or1k/bits/syscalls.h | 101 +++++ .../sysdeps/linux/or1k/bits/uClibc_arch_features.h | 44 ++ libc/sysdeps/linux/or1k/bits/uClibc_page.h | 35 ++ libc/sysdeps/linux/{metag => or1k}/bits/wordsize.h | 0 libc/sysdeps/linux/or1k/brk.c | 23 ++ libc/sysdeps/linux/or1k/clone.c | 88 ++++ libc/sysdeps/linux/or1k/crt1.S | 144 +++++++ libc/sysdeps/linux/or1k/crti.S | 11 + libc/sysdeps/linux/or1k/crtn.S | 9 + libc/sysdeps/linux/or1k/jmpbuf-offsets.h | 8 + .../sysdeps/linux/or1k/jmpbuf-unwind.h | 31 +- libc/sysdeps/linux/or1k/sbrk.c | 27 ++ libc/sysdeps/linux/or1k/setjmp.S | 96 +++++ libc/sysdeps/linux/or1k/spr_defs.h | 429 ++++++++++++++++++++ libc/sysdeps/linux/or1k/sys/procfs.h | 116 ++++++ .../sysdeps/linux/or1k/sys/ucontext.h | 25 +- libc/sysdeps/linux/xtensa/__longjmp.S | 17 + libc/sysdeps/linux/xtensa/bits/setjmp.h | 9 + libc/sysdeps/linux/xtensa/clone.S | 21 +- libc/sysdeps/linux/xtensa/crt1.S | 30 ++ libc/sysdeps/linux/xtensa/crti.S | 15 +- libc/sysdeps/linux/xtensa/crtn.S | 17 +- libc/sysdeps/linux/xtensa/mmap.S | 2 +- libc/sysdeps/linux/xtensa/setjmp.S | 17 + libc/sysdeps/linux/xtensa/syscall.S | 4 +- libc/sysdeps/linux/xtensa/sysdep.h | 45 +- libc/sysdeps/linux/xtensa/vfork.S | 23 ++ libc/sysdeps/linux/xtensa/windowspill.S | 3 + libpthread/linuxthreads/sysdeps/or1k/pt-machine.h | 55 +++ .../sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h | 64 ++- libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S | 14 +- .../nptl/sysdeps/xtensa/pthread_spin_trylock.S | 13 +- test/tls/tls-macros.h | 27 ++ 69 files changed, 3044 insertions(+), 255 deletions(-) create mode 100644 extra/Configs/Config.or1k create mode 100644 extra/Configs/defconfigs/or1k/defconfig create mode 100644 ldso/ldso/or1k/dl-debug.h create mode 100644 ldso/ldso/or1k/dl-startup.h copy ldso/ldso/{avr32 => or1k}/dl-syscalls.h (100%) create mode 100644 ldso/ldso/or1k/dl-sysdep.h create mode 100644 ldso/ldso/or1k/elfinterp.c create mode 100644 ldso/ldso/or1k/resolve.S copy libc/sysdeps/linux/{alpha => or1k}/Makefile (100%) create mode 100644 libc/sysdeps/linux/or1k/Makefile.arch create mode 100644 libc/sysdeps/linux/or1k/__init_brk.c create mode 100644 libc/sysdeps/linux/or1k/__longjmp.S copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/__syscall_error.c (72%) copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/bits/endian.h (72%) create mode 100644 libc/sysdeps/linux/or1k/bits/fcntl.h create mode 100644 libc/sysdeps/linux/or1k/bits/kernel_stat.h create mode 100644 libc/sysdeps/linux/or1k/bits/kernel_types.h copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/bits/machine-gmon.h (61%) copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/bits/setjmp.h (70%) copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/bits/sigcontextinfo.h (72%) copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/bits/stackinfo.h (72%) create mode 100644 libc/sysdeps/linux/or1k/bits/syscalls.h create mode 100644 libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h create mode 100644 libc/sysdeps/linux/or1k/bits/uClibc_page.h copy libc/sysdeps/linux/{metag => or1k}/bits/wordsize.h (100%) create mode 100644 libc/sysdeps/linux/or1k/brk.c create mode 100644 libc/sysdeps/linux/or1k/clone.c create mode 100644 libc/sysdeps/linux/or1k/crt1.S create mode 100644 libc/sysdeps/linux/or1k/crti.S create mode 100644 libc/sysdeps/linux/or1k/crtn.S create mode 100644 libc/sysdeps/linux/or1k/jmpbuf-offsets.h copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/jmpbuf-unwind.h (57%) create mode 100644 libc/sysdeps/linux/or1k/sbrk.c create mode 100644 libc/sysdeps/linux/or1k/setjmp.S create mode 100644 libc/sysdeps/linux/or1k/spr_defs.h create mode 100644 libc/sysdeps/linux/or1k/sys/procfs.h copy libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S => libc/sysdeps/linux/or1k/sys/ucontext.h (72%) create mode 100644 libpthread/linuxthreads/sysdeps/or1k/pt-machine.h diff --git a/extra/Configs/Config.in b/extra/Configs/Config.in index 4fbd398..56454ca 100644 --- a/extra/Configs/Config.in +++ b/extra/Configs/Config.in @@ -32,6 +32,7 @@ choice default TARGET_microblaze if DESIRED_TARGET_ARCH = "microblaze" default TARGET_mips if DESIRED_TARGET_ARCH = "mips" default TARGET_nios2 if DESIRED_TARGET_ARCH = "nios2" + default TARGET_or1k if DESIRED_TARGET_ARCH = "or1k" default TARGET_powerpc if DESIRED_TARGET_ARCH = "powerpc" default TARGET_sh if DESIRED_TARGET_ARCH = "sh" default TARGET_sparc if DESIRED_TARGET_ARCH = "sparc" @@ -97,6 +98,9 @@ config TARGET_mips config TARGET_nios2 bool "nios2" +config TARGET_or1k + bool "or1k" + config TARGET_powerpc bool "powerpc" @@ -184,6 +188,10 @@ if TARGET_mips source "extra/Configs/Config.mips" endif +if TARGET_or1k +source "extra/Configs/Config.or1k" +endif + if TARGET_powerpc source "extra/Configs/Config.powerpc" endif @@ -443,7 +451,7 @@ config LDSO_NO_CLEANUP Unless you know you need this, you should answer N. config UCLIBC_CTOR_DTOR - boolean + bool default y help If you wish to build uClibc with support for global constructor @@ -522,7 +530,8 @@ config UCLIBC_HAS_THREADS_NATIVE !TARGET_ia64 && \ !TARGET_m68k && \ !TARGET_microblaze && \ - !TARGET_nios2 + !TARGET_nios2 && \ + !TARGET_or1k help If you want to compile uClibc with NPTL support, then answer Y. diff --git a/extra/Configs/Config.or1k b/extra/Configs/Config.or1k new file mode 100644 index 0000000..45e6f0a --- /dev/null +++ b/extra/Configs/Config.or1k @@ -0,0 +1,35 @@ +# +# For a description of the syntax of this configuration file, +# see extra/config/Kconfig-language.txt +# + +config TARGET_ARCH + default "or1k" + +config ARCH_CFLAGS + string + +config ARCH_LDFLAGS + string + +config LIBGCC_CFLAGS + string + +choice + prompt "Target Architecture Type" + default CONFIG_OR1K + help + This is the architecture type of your CPU. This information is used for + optimizing purposes. + + These are the possible settings: + - or1k Generic support for OpenCores OpenRISC/or1k architecture. + +config CONFIG_OR1K + select ARCH_HAS_MMU + select UCLIBC_HAS_FPU + select ARCH_BIG_ENDIAN + select HAS_NO_THREADS + bool "or1k" + +endchoice diff --git a/extra/Configs/defconfigs/or1k/defconfig b/extra/Configs/defconfigs/or1k/defconfig new file mode 100644 index 0000000..f8b8d2b --- /dev/null +++ b/extra/Configs/defconfigs/or1k/defconfig @@ -0,0 +1,245 @@ +# +# Automatically generated make config: don't edit +# Version: 0.9.34-git +# Wed Oct 10 16:27:15 2012 +# +# TARGET_alpha is not set +# TARGET_arm is not set +# TARGET_avr32 is not set +# TARGET_bfin is not set +# TARGET_c6x is not set +# TARGET_cris is not set +# TARGET_e1 is not set +# TARGET_frv is not set +# TARGET_h8300 is not set +# TARGET_hppa is not set +# TARGET_i386 is not set +# TARGET_i960 is not set +# TARGET_ia64 is not set +# TARGET_m68k is not set +# TARGET_microblaze is not set +# TARGET_mips is not set +# TARGET_nios is not set +# TARGET_nios2 is not set +TARGET_or1k=y +# TARGET_powerpc is not set +# TARGET_sh is not set +# TARGET_sh64 is not set +# TARGET_sparc is not set +# TARGET_v850 is not set +# TARGET_vax is not set +# TARGET_x86_64 is not set +# TARGET_xtensa is not set + +# +# Target Architecture Features and Options +# +TARGET_ARCH="or1k" +CONFIG_OR1K=y +TARGET_SUBARCH="" + +# +# Using ELF file format +# +ARCH_BIG_ENDIAN=y + +# +# Using Big Endian +# +ARCH_HAS_MMU=y +ARCH_USE_MMU=y +UCLIBC_HAS_FLOATS=y +UCLIBC_HAS_FPU=y +DO_C99_MATH=y +# DO_XSI_MATH is not set +# UCLIBC_HAS_FENV is not set +KERNEL_HEADERS="${SYSROOT}/usr/include" +HAVE_DOT_CONFIG=y + +# +# General Library Settings +# +DOPIC=y +HAVE_SHARED=y +# FORCE_SHAREABLE_TEXT_SEGMENTS is not set +LDSO_LDD_SUPPORT=y +LDSO_CACHE_SUPPORT=y +LDSO_PRELOAD_ENV_SUPPORT=y +# LDSO_PRELOAD_FILE_SUPPORT is not set +LDSO_BASE_FILENAME="ld.so" +# LDSO_STANDALONE_SUPPORT is not set +# LDSO_PRELINK_SUPPORT is not set +UCLIBC_STATIC_LDCONFIG=y +LDSO_RUNPATH=y +LDSO_SEARCH_INTERP_PATH=y +LDSO_LD_LIBRARY_PATH=y +# LDSO_NO_CLEANUP is not set +UCLIBC_CTOR_DTOR=y +# LDSO_GNU_HASH_SUPPORT is not set +# HAS_NO_THREADS is not set +LINUXTHREADS_OLD=y +# LINUXTHREADS_NEW is not set +# UCLIBC_HAS_THREADS_NATIVE is not set +UCLIBC_HAS_THREADS=y +# PTHREADS_DEBUG_SUPPORT is not set +UCLIBC_HAS_SYSLOG=y +UCLIBC_HAS_LFS=y +# MALLOC is not set +# MALLOC_SIMPLE is not set +MALLOC_STANDARD=y +# MALLOC_GLIBC_COMPAT is not set +# UCLIBC_DYNAMIC_ATEXIT is not set +COMPAT_ATEXIT=y +UCLIBC_SUSV3_LEGACY=y +# UCLIBC_SUSV3_LEGACY_MACROS is not set +UCLIBC_SUSV4_LEGACY=y +# UCLIBC_STRICT_HEADERS is not set +# UCLIBC_HAS_STUBS is not set +UCLIBC_HAS_SHADOW=y +UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y +UCLIBC_HAS___PROGNAME=y +UCLIBC_HAS_PTY=y +ASSUME_DEVPTS=y +UNIX98PTY_ONLY=y +# UCLIBC_HAS_GETPT is not set +# UCLIBC_HAS_LIBUTIL is not set +UCLIBC_HAS_TM_EXTENSIONS=y +UCLIBC_HAS_TZ_CACHING=y +UCLIBC_HAS_TZ_FILE=y +UCLIBC_HAS_TZ_FILE_READ_MANY=y +UCLIBC_TZ_FILE_PATH="/etc/TZ" +UCLIBC_FALLBACK_TO_ETC_LOCALTIME=y + +# +# Advanced Library Settings +# +UCLIBC_PWD_BUFFER_SIZE=256 +UCLIBC_GRP_BUFFER_SIZE=256 + +# +# Support various families of functions +# +UCLIBC_LINUX_MODULE_26=y +UCLIBC_LINUX_MODULE_24=y +UCLIBC_LINUX_SPECIFIC=y +UCLIBC_HAS_GNU_ERROR=y +UCLIBC_BSD_SPECIFIC=y +UCLIBC_HAS_BSD_ERR=y +# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set +# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set +# UCLIBC_NTP_LEGACY is not set +# UCLIBC_SV4_DEPRECATED is not set +UCLIBC_HAS_REALTIME=y +UCLIBC_HAS_ADVANCED_REALTIME=y +UCLIBC_HAS_EPOLL=y +UCLIBC_HAS_XATTR=y +UCLIBC_HAS_PROFILING=y +UCLIBC_HAS_CRYPT_IMPL=y +# UCLIBC_HAS_SHA256_CRYPT_IMPL is not set +# UCLIBC_HAS_SHA512_CRYPT_IMPL is not set +UCLIBC_HAS_CRYPT=y +UCLIBC_HAS_NETWORK_SUPPORT=y +UCLIBC_HAS_SOCKET=y +UCLIBC_HAS_IPV4=y +UCLIBC_HAS_IPV6=y +UCLIBC_HAS_RPC=y +UCLIBC_HAS_FULL_RPC=y +UCLIBC_HAS_REENTRANT_RPC=y +# UCLIBC_USE_NETLINK is not set +# UCLIBC_HAS_BSD_RES_CLOSE is not set +UCLIBC_HAS_COMPAT_RES_STATE=y +# UCLIBC_HAS_EXTRA_COMPAT_RES_STATE is not set +# UCLIBC_HAS_RESOLVER_SUPPORT is not set +# UCLIBC_HAS_LIBRESOLV_STUB is not set +# UCLIBC_HAS_LIBNSL_STUB is not set + +# +# String and Stdio Support +# +UCLIBC_HAS_STRING_GENERIC_OPT=y +UCLIBC_HAS_STRING_ARCH_OPT=y +UCLIBC_HAS_CTYPE_TABLES=y +UCLIBC_HAS_CTYPE_SIGNED=y +UCLIBC_HAS_CTYPE_UNSAFE=y +# UCLIBC_HAS_CTYPE_CHECKED is not set +# UCLIBC_HAS_CTYPE_ENFORCED is not set +UCLIBC_HAS_WCHAR=y +# UCLIBC_HAS_LOCALE is not set +# UCLIBC_HAS_HEXADECIMAL_FLOATS is not set +# UCLIBC_HAS_GLIBC_CUSTOM_PRINTF is not set +UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 +# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set +# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set +# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set +UCLIBC_HAS_STDIO_BUFSIZ_4096=y +# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set +UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set +# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set +# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set +UCLIBC_HAS_STDIO_GETC_MACRO=y +UCLIBC_HAS_STDIO_PUTC_MACRO=y +UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y +# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set +# UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE is not set +# UCLIBC_HAS_FOPEN_CLOSEEXEC_MODE is not set +# UCLIBC_HAS_GLIBC_CUSTOM_STREAMS is not set +# UCLIBC_HAS_PRINTF_M_SPEC is not set +UCLIBC_HAS_ERRNO_MESSAGES=y +# UCLIBC_HAS_SYS_ERRLIST is not set +UCLIBC_HAS_SIGNUM_MESSAGES=y +# UCLIBC_HAS_SYS_SIGLIST is not set +UCLIBC_HAS_GNU_GETOPT=y +UCLIBC_HAS_GNU_GETSUBOPT=y + +# +# Big and Tall +# +UCLIBC_HAS_REGEX=y +UCLIBC_HAS_REGEX_OLD=y +UCLIBC_HAS_FNMATCH=y +UCLIBC_HAS_FNMATCH_OLD=y +# UCLIBC_HAS_WORDEXP is not set +# UCLIBC_HAS_NFTW is not set +# UCLIBC_HAS_FTW is not set +# UCLIBC_HAS_FTS is not set +UCLIBC_HAS_GLOB=y +# UCLIBC_HAS_GNU_GLOB is not set +# UCLIBC_HAS_UTMPX is not set + +# +# Library Installation Options +# +RUNTIME_PREFIX="/" +DEVEL_PREFIX="/usr" +MULTILIB_DIR="lib" +HARDWIRED_ABSPATH=y + +# +# Security options +# +# UCLIBC_HAS_ARC4RANDOM is not set +# UCLIBC_HAS_SSP is not set +UCLIBC_BUILD_RELRO=y +# UCLIBC_BUILD_NOW is not set +UCLIBC_BUILD_NOEXECSTACK=y + +# +# Development/debugging options +# +CROSS_COMPILER_PREFIX="or1k-linux-uclibc-" +UCLIBC_EXTRA_CFLAGS="" +# DODEBUG is not set +# DODEBUG_PT is not set +# DOSTRIP is not set +# DOASSERTS is not set +# SUPPORT_LD_DEBUG is not set +# SUPPORT_LD_DEBUG_EARLY is not set +# UCLIBC_MALLOC_DEBUGGING is not set +# UCLIBC_HAS_BACKTRACE is not set +WARNINGS="-Wall" +# EXTRA_WARNINGS is not set +# DOMULTI is not set +# UCLIBC_MJN3_ONLY is not set diff --git a/include/elf.h b/include/elf.h index 18d286b..ed95266 100644 --- a/include/elf.h +++ b/include/elf.h @@ -257,7 +257,7 @@ typedef struct #define EM_MN10300 89 /* Matsushita MN10300 */ #define EM_MN10200 90 /* Matsushita MN10200 */ #define EM_PJ 91 /* picoJava */ -#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */ +#define EM_OR1K 92 /* OpenRISC 32-bit embedded processor */ #define EM_ARCOMPACT 93 /* ARCompact ISA based Cores: ARC 700 */ #define EM_XTENSA 94 /* Tensilica Xtensa Architecture */ #define EM_IP2K 101 /* Ubicom IP2022 micro controller */ @@ -3188,6 +3188,30 @@ typedef Elf32_Addr Elf32_Conflict; #define R_METAG_TLS_DTPMOD 57 #define R_METAG_TLS_DTPOFF 58 +/* OpenRISC 1000 specific relocs */ +#define R_OR1K_NONE 0 +#define R_OR1K_32 1 +#define R_OR1K_16 2 +#define R_OR1K_8 3 +#define R_OR1K_LO_16_IN_INSN 4 +#define R_OR1K_HI_16_IN_INSN 5 +#define R_OR1K_INSN_REL_26 6 +#define R_OR1K_GNU_VTENTRY 7 +#define R_OR1K_GNU_VTINHERIT 8 +#define R_OR1K_32_PCREL 9 +#define R_OR1K_16_PCREL 10 +#define R_OR1K_8_PCREL 11 +#define R_OR1K_GOTPC_HI16 12 +#define R_OR1K_GOTPC_LO16 13 +#define R_OR1K_GOT16 14 +#define R_OR1K_PLT26 15 +#define R_OR1K_GOTOFF_HI16 16 +#define R_OR1K_GOTOFF_LO16 17 +#define R_OR1K_COPY 18 +#define R_OR1K_GLOB_DAT 19 +#define R_OR1K_JMP_SLOT 20 +#define R_OR1K_RELATIVE 21 + /* ARCompact specific relocs */ #define R_ARC_NONE 0x0 #define R_ARC_8 0x1 diff --git a/ldso/ldso/or1k/dl-debug.h b/ldso/ldso/or1k/dl-debug.h new file mode 100644 index 0000000..d925577 --- /dev/null +++ b/ldso/ldso/or1k/dl-debug.h @@ -0,0 +1,53 @@ +/* OpenRISC 1000 shared library loader suppport + * + * Copyright (C) 2012 Stefan Kristansson + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. The name of the above contributors may not be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +static const char * const _dl_reltypes_tab[] = + { + "R_OR1K_NONE", + "R_OR1K_32", + "R_OR1K_16", + "R_OR1K_8", + "R_OR1K_LO_16_IN_INSN", + "R_OR1K_HI_16_IN_INSN", + "R_OR1K_INSN_REL_26", + "R_OR1K_GNU_VTENTRY", + "R_OR1K_GNU_VTINHERIT", + "R_OR1K_32_PCREL", + "R_OR1K_16_PCREL", + "R_OR1K_8_PCREL", + "R_OR1K_GOTPC_HI16", + "R_OR1K_GOTPC_LO16", + "R_OR1K_GOT16", + "R_OR1K_PLT26", + "R_OR1K_GOTOFF_HI16", + "R_OR1K_GOTOFF_LO16", + "R_OR1K_COPY", + "R_OR1K_GLOB_DAT", + "R_OR1K_JMP_SLOT", + "R_OR1K_RELATIVE", + }; diff --git a/ldso/ldso/or1k/dl-startup.h b/ldso/ldso/or1k/dl-startup.h new file mode 100644 index 0000000..3c99bcd --- /dev/null +++ b/ldso/ldso/or1k/dl-startup.h @@ -0,0 +1,106 @@ +/* Startup code for the OpenRISC 1000 platform, + based on microblaze implementation */ +/* + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +__asm__ ("\ + .text\n\ + .globl _start\n\ + .type _start,@function\n\ + .hidden _start\n\ +_start:\n\ + l.ori r3, r9, 0\n\ + l.ori r3, r1, 0\n\ + l.movhi r11, 0\n\ +1:\n\ + l.addi r3, r3, 4\n\ + l.lwz r12, 0(r3)\n\ + l.sfnei r12, 0\n\ + l.addi r11, r11, 1\n\ + l.bf 1b\n\ + l.nop\n\ + l.ori r3, r11, 0\n\ + l.ori r3, r1, 0\n\ + l.addi r11, r11, -1\n\ + /* store argument counter to stack */\n\ + l.sw 0(r3), r11\n\ + l.addi r1, r1, -24\n\ + l.sw 0(r1), r9\n\ +\n\ + l.jal .LPC0\n\ +#ifndef __OR1K_NODELAY__\n\ + l.nop\n\ +#endif\n\ + /* Load the PIC register */\n\ +.LPC0:\n\ + l.movhi r16, gotpchi(_GLOBAL_OFFSET_TABLE_+(.-.LPC0))\n\ + l.ori r16, r16, gotpclo(_GLOBAL_OFFSET_TABLE_+(.-.LPC0))\n\ + l.add r16, r16, r9\n\ +\n\ + l.jal _dl_start\n\ + l.nop\n\ + /* FALLTHRU */\n\ +\n\ + .globl _dl_start_user\n\ + .type _dl_start_user,@function\n\ +_dl_start_user:\n\ + l.movhi r12, gotoffhi(_dl_skip_args)\n\ + l.ori r12, r12, gotofflo(_dl_skip_args)\n\ + l.add r12, r12, r16\n\ + l.lwz r12, 0(r12)\n\ + l.lwz r3, 24(r1)\n\ +\n\ + l.movhi r9, gotoffhi(_dl_fini)\n\ + l.ori r9, r9, gotofflo(_dl_fini)\n\ + l.add r9, r9, r16\n\ +\n\ + l.addi r9, r9, -8\n\ + l.addi r1, r1, 24\n\ + l.jr r11\n\ + l.nop\n\ + .size _dl_start_user, . - _dl_start_user\n\ + .previous\n\ +"); +/* + * Get a pointer to the argv array. On many platforms this can be just + * the address of the first argument, on other platforms we need to + * do something a little more subtle here. + */ +#define GET_ARGV(ARGVP, ARGS) ARGVP = (((unsigned long*) ARGS)+1) + +/* The ld.so library requires relocations */ +#define ARCH_NEEDS_BOOTSTRAP_RELOCS + +static __always_inline +void PERFORM_BOOTSTRAP_RELOC(ELF_RELOC *rpnt, unsigned long *reloc_addr, + unsigned long symbol_addr, unsigned long load_addr, + attribute_unused Elf32_Sym *symtab) +{ + + switch (ELF_R_TYPE(rpnt->r_info)) + { + case R_OR1K_RELATIVE: + + *reloc_addr = load_addr + rpnt->r_addend; + break; + + default: + _dl_exit(1); + break; + + } + +} diff --git a/ldso/ldso/avr32/dl-syscalls.h b/ldso/ldso/or1k/dl-syscalls.h similarity index 100% copy from ldso/ldso/avr32/dl-syscalls.h copy to ldso/ldso/or1k/dl-syscalls.h diff --git a/ldso/ldso/or1k/dl-sysdep.h b/ldso/ldso/or1k/dl-sysdep.h new file mode 100644 index 0000000..21ca028 --- /dev/null +++ b/ldso/ldso/or1k/dl-sysdep.h @@ -0,0 +1,105 @@ +/* elf reloc code for the or1k platform, based on glibc 2.3.6, dl-machine.h */ + +/* + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* Use reloca */ +#define ELF_USES_RELOCA + +#include <elf.h> + + +/* Initialise the GOT */ +#define INIT_GOT(GOT_BASE,MODULE) \ +do { \ + GOT_BASE[2] = (unsigned long) _dl_linux_resolve; \ + GOT_BASE[1] = (unsigned long) MODULE; \ +} while(0) + +/* Here we define the magic numbers that this dynamic loader should accept */ + +#define MAGIC1 EM_OR1K +#undef MAGIC2 +/* Used for error messages */ +#define ELF_TARGET "or1k" + +#define elf_machine_type_class(type) \ + (((type) == R_OR1K_JMP_SLOT) * ELF_RTYPE_CLASS_PLT \ + | ((type) == R_OR1K_COPY) * ELF_RTYPE_CLASS_COPY) + +static inline Elf32_Addr * +or1k_get_got (void) +{ + Elf32_Addr *got; + Elf32_Addr linkreg; + __asm__("l.ori %0, r9, 0\n" + "l.jal .LPC1\n" +#ifndef __OR1K_NODELAY__ + "l.nop\n" +#endif + ".LPC1:\n" + "l.movhi %1, gotpchi(_GLOBAL_OFFSET_TABLE_+(.-.LPC1))\n" + "l.ori %1, %1, gotpclo(_GLOBAL_OFFSET_TABLE_+(.-.LPC1))\n" + "l.add %1, %1, r9\n" + "l.ori r9, %0, 0\n" + : "=r" (linkreg), "=r" (got)); + return got; +} + +/* Return the link-time address of _DYNAMIC. Conveniently, this is the + first element of the GOT. */ +static inline Elf32_Addr +elf_machine_dynamic (void) +{ + Elf32_Addr *got = or1k_get_got(); + return *got; +} + + +/* Return the run-time load address of the shared object. */ +static inline Elf32_Addr +elf_machine_load_address (void) +{ + /* Compute the difference between the runtime address of _DYNAMIC as seen + by a GOTOFF reference, and the link-time address found in the special + unrelocated first GOT entry. */ + Elf32_Addr dyn; + Elf32_Addr *got = or1k_get_got(); + + __asm__ __volatile__ ( + "l.movhi %0, gotoffhi(_DYNAMIC);" + "l.ori %0, %0, gotofflo(_DYNAMIC);" + "l.add %0, %0, %1;" + : "=r"(dyn), "=r"(got) + ); + return dyn - *got; +} + + + +static __always_inline void +elf_machine_relative (Elf32_Addr load_off, const Elf32_Addr rel_addr, + Elf32_Word relative_count) +{ + Elf32_Rela * rpnt = (void *) rel_addr; + --rpnt; + do { + Elf32_Addr *const reloc_addr = (void *) (load_off + + (++rpnt)->r_offset); + + *reloc_addr += load_off; + } while (--relative_count); +} diff --git a/ldso/ldso/or1k/elfinterp.c b/ldso/ldso/or1k/elfinterp.c new file mode 100644 index 0000000..928e95b --- /dev/null +++ b/ldso/ldso/or1k/elfinterp.c @@ -0,0 +1,333 @@ +/* vi: set sw=4 ts=4: */ +/* OpenRISC 1000 ELF shared library loader suppport + * + * Copyright (c) 1994-2000 Eric Youngdale, Peter MacDonald, + * David Engel, Hongjiu Lu and Mitch D'Souza + * Copyright (C) 2001-2004 Erik Andersen + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. The name of the above contributors may not be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include "ldso.h" + +/* Program to load an ELF binary on a linux system, and run it. + References to symbols in sharable libraries can be resolved by either + an ELF sharable library or a linux style of shared library. */ + +/* Disclaimer: I have never seen any AT&T source code for SVr4, nor have + I ever taken any courses on internals. This program was developed using + information available through the book "UNIX SYSTEM V RELEASE 4, + Programmers guide: Ansi C and Programming Support Tools", which did + a more than adequate job of explaining everything required to get this + working. */ + +extern int _dl_linux_resolve(void); + +unsigned long +_dl_linux_resolver(struct elf_resolve *tpnt, int reloc_entry) +{ + ELF_RELOC *this_reloc; + char *strtab; + ElfW(Sym) *symtab; + int symtab_index; + char *rel_addr; + char *new_addr; + char **got_addr; + ElfW(Addr) instr_addr; + char *symname; + + rel_addr = (char *)tpnt->dynamic_info[DT_JMPREL]; + this_reloc = (ELF_RELOC *)(rel_addr + reloc_entry); + symtab_index = ELF_R_SYM(this_reloc->r_info); + + symtab = (ElfW(Sym) *)tpnt->dynamic_info[DT_SYMTAB]; + strtab = (char *)tpnt->dynamic_info[DT_STRTAB]; + symname = strtab + symtab[symtab_index].st_name; + + /* Address of the jump instruction to fix up. */ + instr_addr = (this_reloc->r_offset + tpnt->loadaddr); + got_addr = (char **)instr_addr; + + /* Get the address of the GOT entry. */ + new_addr = _dl_find_hash(symname, &_dl_loaded_modules->symbol_scope, tpnt, ELF_RTYPE_CLASS_PLT, NULL); + if (unlikely(!new_addr)) { + _dl_dprintf(2, "%s: can't resolve symbol '%s' in lib '%s'.\n", + _dl_progname, symname, tpnt->libname); + _dl_exit(1); + } + +#if defined (__SUPPORT_LD_DEBUG__) + if ((unsigned long)got_addr < 0x40000000) { + if (_dl_debug_bindings) { + _dl_dprintf(_dl_debug_file, "\nresolve function: %s", symname); + if (_dl_debug_detail) + _dl_dprintf(_dl_debug_file, + "\tpatched: %x ==> %x @ %x\n", + *got_addr, new_addr, got_addr); + } + } + if (!_dl_debug_nofixups) +#endif + *got_addr = new_addr; + + return (unsigned long)new_addr; +} + +static int +_dl_parse(struct elf_resolve *tpnt, struct r_scope_elem *scope, + unsigned long rel_addr, unsigned long rel_size, + int (*reloc_fnc)(struct elf_resolve *tpnt, struct r_scope_elem *scope, + ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab)) +{ + unsigned int i; + char *strtab; + ElfW(Sym) *symtab; + ELF_RELOC *rpnt; + int symtab_index; + + /* Parse the relocation information. */ + rpnt = (ELF_RELOC *)rel_addr; + rel_size /= sizeof(ELF_RELOC); + + symtab = (ElfW(Sym) *)tpnt->dynamic_info[DT_SYMTAB]; + strtab = (char *)tpnt->dynamic_info[DT_STRTAB]; + + for (i = 0; i < rel_size; i++, rpnt++) { + int res; + + symtab_index = ELF_R_SYM(rpnt->r_info); + + debug_sym(symtab, strtab, symtab_index); + debug_reloc(symtab, strtab, rpnt); + + res = reloc_fnc(tpnt, scope, rpnt, symtab, strtab); + + if (res == 0) + continue; + + _dl_dprintf(2, "\n%s: ", _dl_progname); + + if (symtab_index) + _dl_dprintf(2, "symbol '%s': ", + strtab + symtab[symtab_index].st_name); + + if (unlikely(res < 0)) { + int reloc_type = ELF_R_TYPE(rpnt->r_info); + + _dl_dprintf(2, "can't handle reloc type " +#if defined (__SUPPORT_LD_DEBUG__) + "%s\n", _dl_reltypes(reloc_type)); +#else + "%x\n", reloc_type); +#endif + _dl_exit(-res); + } else if (unlikely(res > 0)) { + _dl_dprintf(2, "can't resolve symbol\n"); + return res; + } + } + + return 0; +} + +static int +_dl_do_reloc(struct elf_resolve *tpnt, struct r_scope_elem *scope, + ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab) +{ + int reloc_type; + int symtab_index; + char *symname; +#if defined USE_TLS && USE_TLS + struct elf_resolve *tls_tpnt; +#endif + struct symbol_ref sym_ref; + ElfW(Addr) *reloc_addr; + ElfW(Addr) symbol_addr; +#if defined (__SUPPORT_LD_DEBUG__) + ElfW(Addr) old_val; +#endif + + struct unaligned { + Elf32_Addr x; + } __attribute__ ((packed, may_alias)); + + reloc_addr = (ElfW(Addr)*)(tpnt->loadaddr + (unsigned long)rpnt->r_offset); + reloc_type = ELF_R_TYPE(rpnt->r_info); + symtab_index = ELF_R_SYM(rpnt->r_info); + sym_ref.sym = &symtab[symtab_index]; + sym_ref.tpnt = NULL; + symbol_addr = 0; + symname = strtab + sym_ref.sym->st_name; + + if (symtab_index) { + symbol_addr = (ElfW(Addr))_dl_find_hash(symname, scope, tpnt, + elf_machine_type_class(reloc_type), &sym_ref); + /* + * We want to allow undefined references to weak symbols - this + * might have been intentional. We should not be linking local + * symbols here, so all bases should be covered. + */ + if (unlikely(!symbol_addr && (ELF_ST_TYPE(sym_ref.sym->st_info) != STT_TLS) + && (ELF_ST_BIND(sym_ref.sym->st_info) != STB_WEAK))) { + /* This may be non-fatal if called from dlopen. */ + return 1; + } +#if defined USE_TLS && USE_TLS + tls_tpnt = sym_ref.tpnt; +#endif + } else { + /* Relocs against STN_UNDEF are usually treated as using a + * symbol value of zero, and using the module containing the + * reloc itself. */ + symbol_addr = sym_ref.sym->st_value; +#if defined USE_TLS && USE_TLS + tls_tpnt = tpnt; +#endif + } + + +#if defined (__SUPPORT_LD_DEBUG__) + if (reloc_addr) { + old_val = ((struct unaligned *)reloc_addr)->x; + } else { + old_val = 0; + } +#endif + + switch (reloc_type) { + case R_OR1K_NONE: + break; + + case R_OR1K_8: + case R_OR1K_16: + case R_OR1K_32: + /* Support relocations on mis-aligned offsets. */ + ((struct unaligned *)reloc_addr)->x = symbol_addr + + rpnt->r_addend; + break; + + case R_OR1K_8_PCREL: + case R_OR1K_16_PCREL: + case R_OR1K_32_PCREL: + case R_OR1K_INSN_REL_26: + *reloc_addr = symbol_addr + rpnt->r_addend; + break; + + case R_OR1K_GLOB_DAT: + case R_OR1K_JMP_SLOT: + *reloc_addr = symbol_addr + rpnt->r_addend; + break; +/* Handled by elf_machine_relative */ + case R_OR1K_RELATIVE: + *reloc_addr = (unsigned long)tpnt->loadaddr + rpnt->r_addend; + break; + + case R_OR1K_COPY: + if (symbol_addr) { +#if defined (__SUPPORT_LD_DEBUG__) + if (_dl_debug_move) + _dl_dprintf(_dl_debug_file, + "\t%s move %d bytes from %x to %x\n", + symname, sym_ref.sym->st_size, + symbol_addr, reloc_addr); +#endif + + _dl_memcpy((char *)reloc_addr, + (char *)symbol_addr, + sym_ref.sym->st_size); + } +#if defined (__SUPPORT_LD_DEBUG__) + else + _dl_dprintf(_dl_debug_file, "no symbol_addr to copy !?\n"); +#endif + break; + + default: + return -1; /* Calls _dl_exit(1). */ + } + +#if defined (__SUPPORT_LD_DEBUG__) + if (_dl_debug_reloc && _dl_debug_detail) + _dl_dprintf(_dl_debug_file, "\tpatched: %x ==> %x @ %x\n", + old_val, ((struct unaligned *)reloc_addr)->x, + reloc_addr); +#endif + + return 0; +} + +static int +_dl_do_lazy_reloc(struct elf_resolve *tpnt, struct r_scope_elem *scope, + ELF_RELOC *rpnt, ElfW(Sym) *symtab, char *strtab) +{ + int reloc_type; + int symtab_index; + ElfW(Addr) *reloc_addr; +#if defined (__SUPPORT_LD_DEBUG__) + ElfW(Addr) old_val; +#endif + + (void)scope; + symtab_index = ELF_R_SYM(rpnt->r_info); + (void)strtab; + + reloc_addr = (ElfW(Addr)*)(tpnt->loadaddr + rpnt->r_offset); + reloc_type = ELF_R_TYPE(rpnt->r_info); + +#if defined (__SUPPORT_LD_DEBUG__) + old_val = *reloc_addr; +#endif + + switch (reloc_type) { + case R_OR1K_NONE: + break; + case R_OR1K_JMP_SLOT: + *reloc_addr += (unsigned long)tpnt->loadaddr; + break; + default: + _dl_exit(1); + } + +#if defined (__SUPPORT_LD_DEBUG__) + if (_dl_debug_reloc && _dl_debug_detail) + _dl_dprintf(_dl_debug_file, "\tpatched_lazy: %x ==> %x @ %x\n", + old_val, *reloc_addr, reloc_addr); +#endif + + return 0; +} + +void +_dl_parse_lazy_relocation_information(struct dyn_elf *rpnt, + unsigned long rel_addr, unsigned long rel_size) +{ + (void)_dl_parse(rpnt->dyn, NULL, rel_addr, rel_size, _dl_do_lazy_reloc); +} + +int +_dl_parse_relocation_information(struct dyn_elf *rpnt, + struct r_scope_elem *scope, unsigned long rel_addr, unsigned long rel_size) +{ + return _dl_parse(rpnt->dyn, scope, rel_addr, rel_size, _dl_do_reloc); +} diff --git a/ldso/ldso/or1k/resolve.S b/ldso/ldso/or1k/resolve.S new file mode 100644 index 0000000..4a156d5 --- /dev/null +++ b/ldso/ldso/or1k/resolve.S @@ -0,0 +1,54 @@ +/* This code is used in dl-runtime.c to call the `fixup' function + and then redirect to the address it returns. */ +/* We assume that R11 contain relocation offset and R12 contains + link_map (_DYNAMIC). This must be consistent with the JUMP_SLOT + layout generated by binutils. */ + +/* Based on microblaze implementation */ +/* + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +.text +.align 4 +.globl _dl_linux_resolver +.globl _dl_linux_resolve +.type _dl_linux_resolve,@function + +_dl_linux_resolve: + l.addi r1, r1, -32 + l.sw 0(r1), r9 + /* save function arguments */ + l.sw 8(r1), r3 + l.sw 12(r1), r4 + l.sw 16(r1), r5 + l.sw 20(r1), r6 + l.sw 24(r1), r7 + l.sw 28(r1), r8 + l.ori r3, r12, 0 + l.ori r4, r11, 0 + l.jal _dl_linux_resolver + l.nop + l.lwz r8, 28(r1) + l.lwz r7, 24(r1) + l.lwz r6, 20(r1) + l.lwz r5, 16(r1) + l.lwz r4, 12(r1) + l.lwz r3, 8(r1) + l.lwz r9, 0(r1) + l.addi r1, r1, 32 + l.jr r11 + l.nop + .size _dl_linux_resolve, . - _dl_linux_resolve diff --git a/ldso/ldso/xtensa/dl-startup.h b/ldso/ldso/xtensa/dl-startup.h index 8fe54a3..aece0cd 100644 --- a/ldso/ldso/xtensa/dl-startup.h +++ b/ldso/ldso/xtensa/dl-startup.h @@ -23,6 +23,7 @@ __asm__ ( " .align 4\n" "0: movi a3, _start+3\n" " sub a2, a0, a3\n" +#if defined(__XTENSA_WINDOWED_ABI__) " # Make sure a0 is cleared to mark the top of stack.\n" " movi a0, 0\n" " # user_entry_point = _dl_start(pointer to argument block)\n" @@ -32,6 +33,17 @@ __asm__ ( " callx4 a4\n" " # Save user_entry_point so we can jump to it.\n" " mov a3, a6\n" +#elif defined(__XTENSA_CALL0_ABI__) + " # user_entry_point = _dl_start(pointer to argument block)\n" + " movi a0, _dl_start\n" + " add a0, a0, a2\n" + " mov a2, sp\n" + " callx0 a0\n" + " # Save user_entry_point so we can jump to it.\n" + " mov a3, a2\n" +#else +#error Unsupported Xtensa ABI +#endif " l32i a7, sp, 0 # load argc\n" " # Load _dl_skip_args into a4.\n" " movi a4, _dl_skip_args\n" diff --git a/ldso/ldso/xtensa/dl-tlsdesc.S b/ldso/ldso/xtensa/dl-tlsdesc.S index 0638af4..6f417f6 100644 --- a/ldso/ldso/xtensa/dl-tlsdesc.S +++ b/ldso/ldso/xtensa/dl-tlsdesc.S @@ -23,16 +23,11 @@ #include "tlsdesc.h" .text - .align 4 - .hidden _dl_tlsdesc_return - .global _dl_tlsdesc_return - .type _dl_tlsdesc_return, @function -_dl_tlsdesc_return: - entry a1, 16 +HIDDEN_ENTRY (_dl_tlsdesc_return) rur.threadptr a3 add a2, a2, a3 - retw - .size _dl_tlsdesc_return, .-_dl_tlsdesc_return + abi_ret +END (_dl_tlsdesc_return) #ifdef SHARED @@ -57,12 +52,7 @@ _dl_tlsdesc_return: } */ - .align 4 - .hidden _dl_tlsdesc_dynamic - .global _dl_tlsdesc_dynamic - .type _dl_tlsdesc_dynamic, @function -_dl_tlsdesc_dynamic: - entry a1, 32 +HIDDEN_ENTRY (_dl_tlsdesc_dynamic) /* dtv_t *dtv = (dtv_t *)THREAD_DTV(); */ rur.threadptr a3 @@ -83,16 +73,31 @@ _dl_tlsdesc_dynamic: + td->tlsinfo.ti_offset - __builtin_thread_pointer(); */ l32i a6, a2, TLSDESC_MODOFF sub a2, a6, a3 - retw + abi_ret /* return __tls_get_addr (&td->tlsinfo) - __builtin_thread_pointer(); */ .Lslow: - mov a10, a2 - movi a8, __tls_get_addr - callx8 a8 - sub a2, a10, a3 +#if defined(__XTENSA_WINDOWED_ABI__) + mov a6, a2 + movi a4, __tls_get_addr + callx4 a4 + sub a2, a6, a3 retw - .size _dl_tlsdesc_dynamic, .-_dl_tlsdesc_dynamic +#elif defined(__XTENSA_CALL0_ABI__) + addi a1, a1, -16 + s32i a0, a1, 0 + s32i a3, a1, 4 + movi a0, __tls_get_addr + callx0 a0 + l32i a3, a1, 4 + l32i a0, a1, 0 + sub a2, a2, a3 + addi a1, a1, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif +END (_dl_tlsdesc_dynamic) #endif /* SHARED */ #endif diff --git a/ldso/ldso/xtensa/resolve.S b/ldso/ldso/xtensa/resolve.S index 8061af2..12a554d 100644 --- a/ldso/ldso/xtensa/resolve.S +++ b/ldso/ldso/xtensa/resolve.S @@ -31,6 +31,7 @@ .global _dl_linux_resolve .type _dl_linux_resolve, @function _dl_linux_resolve: +#if defined(__XTENSA_WINDOWED_ABI__) /* Call the fixup function. */ movi a8, _dl_linux_resolver callx8 a8 @@ -47,4 +48,38 @@ _dl_linux_resolve: /* Jump to the next instruction past the ENTRY. */ addi a10, a10, 3 jx a10 +#elif defined(__XTENSA_CALL0_ABI__) + /* Reserve stack space and save incoming arguments. */ + addi a1, a1, -32 + s32i a0, a1, 0 + s32i a2, a1, 8 + s32i a3, a1, 12 + s32i a4, a1, 16 + s32i a5, a1, 20 + s32i a6, a1, 24 + s32i a7, a1, 28 + + /* Move arguments for the _dl_linux_resolver to proper registers. */ + mov a2, a10 + mov a3, a11 + /* Call the fixup function. */ + movi a0, _dl_linux_resolver + callx0 a0 + mov a10, a2 + + /* Restore incoming arguments from stack and deallocate reservation. */ + l32i a0, a1, 0 + l32i a2, a1, 8 + l32i a3, a1, 12 + l32i a4, a1, 16 + l32i a5, a1, 20 + l32i a6, a1, 24 + l32i a7, a1, 28 + addi a1, a1, 32 + + /* Jump to the target function. */ + jx a10 +#else +#error Unsupported Xtensa ABI +#endif .size _dl_linux_resolve, . - _dl_linux_resolve diff --git a/libc/string/xtensa/memcpy.S b/libc/string/xtensa/memcpy.S index 2b23b41..2442056 100644 --- a/libc/string/xtensa/memcpy.S +++ b/libc/string/xtensa/memcpy.S @@ -91,7 +91,7 @@ __memcpy_aux: #if !XCHAL_HAVE_LOOPS blt a3, a7, 1b #endif -2: retw +2: abi_ret /* Destination is unaligned. */ @@ -181,7 +181,7 @@ ENTRY (memcpy) 3: bbsi.l a4, 2, 4f bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 4 bytes. */ 4: l32i a6, a3, 0 @@ -190,7 +190,7 @@ ENTRY (memcpy) addi a5, a5, 4 bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 2 bytes. */ 5: l16ui a6, a3, 0 @@ -198,14 +198,14 @@ ENTRY (memcpy) s16i a6, a5, 0 addi a5, a5, 2 bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 1 byte. */ 6: l8ui a6, a3, 0 s8i a6, a5, 0 .Ldone: - retw + abi_ret /* Destination is aligned; source is unaligned. */ @@ -276,7 +276,7 @@ ENTRY (memcpy) #endif bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 2 bytes. */ 5: l8ui a6, a3, 0 @@ -286,11 +286,11 @@ ENTRY (memcpy) s8i a7, a5, 1 addi a5, a5, 2 bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 1 byte. */ 6: l8ui a6, a3, 0 s8i a6, a5, 0 - retw + abi_ret libc_hidden_def (memcpy) diff --git a/libc/string/xtensa/memset.S b/libc/string/xtensa/memset.S index 435d6de..20bf14c 100644 --- a/libc/string/xtensa/memset.S +++ b/libc/string/xtensa/memset.S @@ -63,7 +63,7 @@ __memset_aux: #if !XCHAL_HAVE_LOOPS blt a5, a6, 1b #endif -2: retw +2: abi_ret /* Destination is unaligned. */ @@ -159,6 +159,6 @@ ENTRY (memset) /* Set 1 byte. */ s8i a3, a5, 0 -6: retw +6: abi_ret libc_hidden_def (memset) diff --git a/libc/string/xtensa/strcmp.S b/libc/string/xtensa/strcmp.S index 8ed1ed0..2dce590 100644 --- a/libc/string/xtensa/strcmp.S +++ b/libc/string/xtensa/strcmp.S @@ -108,7 +108,7 @@ ENTRY (strcmp) #endif .Lretdiff: sub a2, a8, a9 - retw + abi_ret /* s1 is word-aligned; s2 is word-aligned. @@ -229,7 +229,7 @@ ENTRY (strcmp) /* Words are equal; some byte is zero. */ .Leq: movi a2, 0 /* return equal */ - retw + abi_ret .Lwne2: /* Words are not equal. On big-endian processors, if none of the bytes are zero, the return value can be determined by a simple @@ -239,10 +239,10 @@ ENTRY (strcmp) bnall a10, a7, .Lsomezero bgeu a8, a9, .Lposreturn movi a2, -1 - retw + abi_ret .Lposreturn: movi a2, 1 - retw + abi_ret .Lsomezero: /* There is probably some zero byte. */ #endif /* __XTENSA_EB__ */ .Lwne: /* Words are not equal. */ @@ -263,14 +263,14 @@ ENTRY (strcmp) byte. Just subtract words to get the return value. The high order equal bytes cancel, leaving room for the sign. */ sub a2, a8, a9 - retw + abi_ret .Ldiff0: /* Need to make room for the sign, so can't subtract whole words. */ extui a10, a8, 24, 8 extui a11, a9, 24, 8 sub a2, a10, a11 - retw + abi_ret #else /* !__XTENSA_EB__ */ /* Little-endian is a little more difficult because can't subtract @@ -281,28 +281,28 @@ ENTRY (strcmp) extui a10, a8, 24, 8 extui a11, a9, 24, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff0: /* Byte 0 is different. */ extui a10, a8, 0, 8 extui a11, a9, 0, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff1: /* Byte 0 is equal; byte 1 is different. */ extui a10, a8, 8, 8 extui a11, a9, 8, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff2: /* Bytes 0-1 are equal; byte 2 is different. */ extui a10, a8, 16, 8 extui a11, a9, 16, 8 sub a2, a10, a11 - retw + abi_ret #endif /* !__XTENSA_EB */ diff --git a/libc/string/xtensa/strcpy.S b/libc/string/xtensa/strcpy.S index f9f5868..9f42b34 100644 --- a/libc/string/xtensa/strcpy.S +++ b/libc/string/xtensa/strcpy.S @@ -68,7 +68,7 @@ ENTRY (strcpy) s8i a8, a10, 1 /* store byte 0 */ addi a10, a10, 2 /* advance dst pointer */ bnez a8, .Lsrcaligned -1: retw +1: abi_ret /* dst is word-aligned; src is word-aligned. */ @@ -102,21 +102,21 @@ ENTRY (strcpy) #endif /* !XCHAL_HAVE_LOOPS */ .Lz3: /* Byte 3 is zero. */ - retw + abi_ret .Lz0: /* Byte 0 is zero. */ #ifdef __XTENSA_EB__ movi a8, 0 #endif s8i a8, a10, 0 - retw + abi_ret .Lz1: /* Byte 1 is zero. */ #ifdef __XTENSA_EB__ extui a8, a8, 16, 16 #endif s16i a8, a10, 0 - retw + abi_ret .Lz2: /* Byte 2 is zero. */ #ifdef __XTENSA_EB__ @@ -125,7 +125,7 @@ ENTRY (strcpy) s16i a8, a10, 0 movi a8, 0 s8i a8, a10, 2 - retw + abi_ret .align 4 /* (2 mod 4) alignment for loop instruction */ @@ -144,6 +144,6 @@ ENTRY (strcpy) #else bnez a8, 1b #endif -2: retw +2: abi_ret libc_hidden_def (strcpy) diff --git a/libc/string/xtensa/strlen.S b/libc/string/xtensa/strlen.S index 86fe113..e1c98c8 100644 --- a/libc/string/xtensa/strlen.S +++ b/libc/string/xtensa/strlen.S @@ -59,7 +59,7 @@ ENTRY (strlen) /* Byte 3 is zero. */ addi a3, a3, 3 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret /* String is word-aligned. */ @@ -88,16 +88,16 @@ ENTRY (strlen) .Lz0: /* Byte 0 is zero. */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret .Lz1: /* Byte 1 is zero. */ addi a3, a3, 1 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret .Lz2: /* Byte 2 is zero. */ addi a3, a3, 2 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret libc_hidden_def (strlen) diff --git a/libc/string/xtensa/strncpy.S b/libc/string/xtensa/strncpy.S index 115d44c..aa8db5d 100644 --- a/libc/string/xtensa/strncpy.S +++ b/libc/string/xtensa/strncpy.S @@ -67,7 +67,7 @@ __strncpy_aux: j .Lfill .Lret: - retw + abi_ret ENTRY (strncpy) @@ -129,7 +129,7 @@ ENTRY (strncpy) addi a10, a10, 1 bnez a4, .Lfillcleanup -2: retw +2: abi_ret .Lfill1mod2: /* dst address is odd */ s8i a9, a10, 0 /* store byte 0 */ @@ -235,6 +235,6 @@ ENTRY (strncpy) #endif 2: j .Lfill -3: retw +3: abi_ret libc_hidden_def (strncpy) diff --git a/libc/sysdeps/linux/common/fallocate.c b/libc/sysdeps/linux/common/fallocate.c index b231226..0f80fb4 100644 --- a/libc/sysdeps/linux/common/fallocate.c +++ b/libc/sysdeps/linux/common/fallocate.c @@ -12,31 +12,26 @@ #include <fcntl.h> #include <bits/kernel-features.h> #include <stdint.h> +#include <errno.h> #if defined __NR_fallocate extern __typeof(fallocate) __libc_fallocate attribute_hidden; int attribute_hidden __libc_fallocate(int fd, int mode, __off_t offset, __off_t len) { - int ret; - # if __WORDSIZE == 32 - uint32_t off_low = offset; - uint32_t len_low = len; - /* may assert that these >>31 are 0 */ - uint32_t zero = 0; - INTERNAL_SYSCALL_DECL(err); - ret = (int) (INTERNAL_SYSCALL(fallocate, err, 6, fd, mode, - __LONG_LONG_PAIR (zero, off_low), - __LONG_LONG_PAIR (zero, len_low))); + return fallocate64(fd, mode, offset, len); # elif __WORDSIZE == 64 + int ret; INTERNAL_SYSCALL_DECL(err); ret = (int) (INTERNAL_SYSCALL(fallocate, err, 4, fd, mode, offset, len)); + if (unlikely(INTERNAL_SYSCALL_ERROR_P (ret, err))) { + __set_errno(INTERNAL_SYSCALL_ERRNO (ret, err)); + ret = -1; + } + return ret; # else # error your machine is neither 32 bit or 64 bit ... it must be magical # endif - if (unlikely(INTERNAL_SYSCALL_ERROR_P (ret, err))) - return INTERNAL_SYSCALL_ERRNO (ret, err); - return 0; } # if defined __UCLIBC_LINUX_SPECIFIC__ && defined __USE_GNU diff --git a/libc/sysdeps/linux/common/fallocate64.c b/libc/sysdeps/linux/common/fallocate64.c index cf75693..1aa351e 100644 --- a/libc/sysdeps/linux/common/fallocate64.c +++ b/libc/sysdeps/linux/common/fallocate64.c @@ -13,6 +13,7 @@ #include <fcntl.h> #include <bits/kernel-features.h> #include <stdint.h> +#include <errno.h> #if defined __NR_fallocate @@ -27,9 +28,11 @@ int attribute_hidden __libc_fallocate64(int fd, int mode, __off64_t offset, INTERNAL_SYSCALL_DECL(err); ret = (int) (INTERNAL_SYSCALL(fallocate, err, 6, fd, mode, OFF64_HI_LO (offset), OFF64_HI_LO (len))); - if (unlikely(INTERNAL_SYSCALL_ERROR_P (ret, err))) - return INTERNAL_SYSCALL_ERRNO (ret, err); - return 0; + if (unlikely(INTERNAL_SYSCALL_ERROR_P (ret, err))) { + __set_errno(INTERNAL_SYSCALL_ERRNO (ret, err)); + ret = -1; + } + return ret; } # if defined __UCLIBC_LINUX_SPECIFIC__ && defined __USE_GNU diff --git a/libc/sysdeps/linux/common/posix_fallocate.c b/libc/sysdeps/linux/common/posix_fallocate.c index 76771e3..2316cfd 100644 --- a/libc/sysdeps/linux/common/posix_fallocate.c +++ b/libc/sysdeps/linux/common/posix_fallocate.c @@ -12,12 +12,15 @@ #include <fcntl.h> #include <bits/kernel-features.h> #include <stdint.h> +#include <errno.h> #if defined __NR_fallocate extern __typeof(fallocate) __libc_fallocate attribute_hidden; int posix_fallocate(int fd, __off_t offset, __off_t len) { - return __libc_fallocate(fd, 0, offset, len); + if (__libc_fallocate(fd, 0, offset, len)) + return errno; + return 0; } # if defined __UCLIBC_HAS_LFS__ && __WORDSIZE == 64 strong_alias(posix_fallocate,posix_fallocate64) diff --git a/libc/sysdeps/linux/common/posix_fallocate64.c b/libc/sysdeps/linux/common/posix_fallocate64.c index 12ddbc2..85614f6 100644 --- a/libc/sysdeps/linux/common/posix_fallocate64.c +++ b/libc/sysdeps/linux/common/posix_fallocate64.c @@ -12,6 +12,7 @@ #include <fcntl.h> #include <bits/kernel-features.h> #include <stdint.h> +#include <errno.h> #if defined __NR_fallocate # if __WORDSIZE == 64 @@ -20,7 +21,9 @@ extern __typeof(fallocate64) __libc_fallocate64 attribute_hidden; int posix_fallocate64(int fd, __off64_t offset, __off64_t len) { - return __libc_fallocate64(fd, 0, offset, len); + if (__libc_fallocate64(fd, 0, offset, len)) + return errno; + return 0; } # else # error your machine is neither 32 bit or 64 bit ... it must be magical diff --git a/libc/sysdeps/linux/alpha/Makefile b/libc/sysdeps/linux/or1k/Makefile similarity index 100% copy from libc/sysdeps/linux/alpha/Makefile copy to libc/sysdeps/linux/or1k/Makefile diff --git a/libc/sysdeps/linux/or1k/Makefile.arch b/libc/sysdeps/linux/or1k/Makefile.arch new file mode 100644 index 0000000..53d4ed5 --- /dev/null +++ b/libc/sysdeps/linux/or1k/Makefile.arch @@ -0,0 +1,9 @@ +# Makefile for uClibc +# +# Copyright (C) 2010 Jonas Bonn <jonas(a)southpole.se> +# +# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. +# + +CSRC-y := __syscall_error.c __init_brk.c brk.c sbrk.c clone.c +SSRC-y := __longjmp.S setjmp.S diff --git a/libc/sysdeps/linux/or1k/__init_brk.c b/libc/sysdeps/linux/or1k/__init_brk.c new file mode 100644 index 0000000..4c6763f --- /dev/null +++ b/libc/sysdeps/linux/or1k/__init_brk.c @@ -0,0 +1,28 @@ +/* From libc-5.3.12 */ + +#include <errno.h> +#include <unistd.h> +#include <sys/syscall.h> + +void * ___brk_addr = 0; + +int __init_brk (void); +void *_brk(void *ptr); + +#define __NR__brk __NR_brk +_syscall1(void *, _brk, void *, ptr); + +int +__init_brk (void) +{ + if (___brk_addr == 0) + { + ___brk_addr = _brk(0); + if (___brk_addr == 0) + { + __set_errno(ENOMEM); + return -1; + } + } + return 0; +} diff --git a/libc/sysdeps/linux/or1k/__longjmp.S b/libc/sysdeps/linux/or1k/__longjmp.S new file mode 100644 index 0000000..1eb5bb4 --- /dev/null +++ b/libc/sysdeps/linux/or1k/__longjmp.S @@ -0,0 +1,81 @@ +/* longjmp for or1k + + Based on: + longjmp for PowerPC. + Copyright (C) 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <jmpbuf-offsets.h> + +#ifdef __UCLIBC_HAS_FLOATS__ +#define FP(x...) x +#else +#define FP(x...) +#endif + +.globl __longjmp; +.type __longjmp,@function; +.align 2; + +__longjmp: +# l.lwz r11,(JB_SR*4)(r3) +# l.mtspr r0,r11,SPR_SR + l.lwz r1,((JB_GPRS+0)*4)(r3) + l.lwz r2,((JB_GPRS+1)*4)(r3) + /* pass through "value" to r11, then restore r4, for what it's worth" */ +#if 1 + /* if r4 is 0, something wrong, so set it to 1 */ + l.sfeqi r4, 0x0 + l.bnf 1f /* r4 != 0, longjmp value sensible */ + l.nop + l.ori r4, r0, 0x1 /* make nonzero */ +1: +#endif + l.addi r11, r4, 0 + l.lwz r4,((JB_GPRS+3)*4)(r3) + l.lwz r5,((JB_GPRS+4)*4)(r3) + l.lwz r6,((JB_GPRS+5)*4)(r3) + l.lwz r7,((JB_GPRS+6)*4)(r3) + l.lwz r8,((JB_GPRS+7)*4)(r3) + l.lwz r9,((JB_GPRS+8)*4)(r3) + l.lwz r10,((JB_GPRS+9)*4)(r3) + l.lwz r12,((JB_GPRS+11)*4)(r3) + l.lwz r13,((JB_GPRS+12)*4)(r3) + l.lwz r14,((JB_GPRS+13)*4)(r3) + l.lwz r15,((JB_GPRS+14)*4)(r3) + l.lwz r16,((JB_GPRS+15)*4)(r3) + l.lwz r17,((JB_GPRS+16)*4)(r3) + l.lwz r18,((JB_GPRS+17)*4)(r3) + l.lwz r19,((JB_GPRS+18)*4)(r3) + l.lwz r20,((JB_GPRS+19)*4)(r3) + l.lwz r21,((JB_GPRS+20)*4)(r3) + l.lwz r22,((JB_GPRS+21)*4)(r3) + l.lwz r23,((JB_GPRS+22)*4)(r3) + l.lwz r24,((JB_GPRS+23)*4)(r3) + l.lwz r25,((JB_GPRS+24)*4)(r3) + l.lwz r26,((JB_GPRS+25)*4)(r3) + l.lwz r27,((JB_GPRS+26)*4)(r3) + l.lwz r28,((JB_GPRS+27)*4)(r3) + l.lwz r29,((JB_GPRS+28)*4)(r3) + l.lwz r30,((JB_GPRS+29)*4)(r3) + l.lwz r31,((JB_GPRS+30)*4)(r3) + l.jr r9 + l.nop +.size __longjmp,.-__longjmp + +libc_hidden_def(__longjmp) diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/__syscall_error.c similarity index 72% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/__syscall_error.c index 1e220a8..ef83078 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/__syscall_error.c @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -16,22 +16,15 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 +#include <errno.h> - .globl pthread_spin_lock -pthread_spin_lock: +int __syscall_error (int err_no); - entry a1, 16 +/* This routine is jumped to by all the syscall handlers, to stash + * an error number into errno. */ +int __syscall_error (int err_no) +{ + __set_errno (err_no); + return -1; +} - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 - - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/bits/endian.h similarity index 72% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/bits/endian.h index 1e220a8..799e27a 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/bits/endian.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* Copyright (C) 1997, 1998 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -16,22 +16,10 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 +/* or1k can be little or big endian. Hopefully gcc will know... */ - .globl pthread_spin_lock -pthread_spin_lock: +#ifndef _ENDIAN_H +# error "Never use <bits/endian.h> directly; include <endian.h> instead." +#endif - entry a1, 16 - - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 - - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +#define __BYTE_ORDER __BIG_ENDIAN diff --git a/libc/sysdeps/linux/or1k/bits/fcntl.h b/libc/sysdeps/linux/or1k/bits/fcntl.h new file mode 100644 index 0000000..b081300 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/fcntl.h @@ -0,0 +1,236 @@ +/* O_*, F_*, FD_* bit values for Linux. + Copyright (C) 1995-1998, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _FCNTL_H +# error "Never use <bits/fcntl.h> directly; include <fcntl.h> instead." +#endif + + +#include <sys/types.h> +#ifdef __USE_GNU +# include <bits/uio.h> +#endif + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_ACCMODE 0003 +#define O_RDONLY 00 +#define O_WRONLY 01 +#define O_RDWR 02 +#define O_CREAT 0100 /* not fcntl */ +#define O_EXCL 0200 /* not fcntl */ +#define O_NOCTTY 0400 /* not fcntl */ +#define O_TRUNC 01000 /* not fcntl */ +#define O_APPEND 02000 +#define O_NONBLOCK 04000 +#define O_NDELAY O_NONBLOCK +#define O_SYNC 010000 +#define O_FSYNC O_SYNC +#define O_ASYNC 020000 + +#ifdef __USE_GNU +# define O_DIRECT 040000 /* Direct disk access. */ +# define O_DIRECTORY 0200000 /* Must be a directory. */ +# define O_NOFOLLOW 0400000 /* Do not follow links. */ +# define O_NOATIME 01000000 /* Do not set atime. */ +# define O_CLOEXEC 02000000 /* Set close_on_exec. */ +#endif + +#ifdef __USE_LARGEFILE64 +# define O_LARGEFILE 0100000 +#endif + +/* For now Linux has synchronisity options for data and read operations. + We define the symbols here but let them do the same as O_SYNC since + this is a superset. */ +#if defined __USE_POSIX199309 || defined __USE_UNIX98 +# define O_DSYNC O_SYNC /* Synchronize data. */ +# define O_RSYNC O_SYNC /* Synchronize read operations. */ +#endif + +/* Values for the second argument to `fcntl'. */ +#define F_DUPFD 0 /* Duplicate file descriptor. */ +#define F_GETFD 1 /* Get file descriptor flags. */ +#define F_SETFD 2 /* Set file descriptor flags. */ +#define F_GETFL 3 /* Get file status flags. */ +#define F_SETFL 4 /* Set file status flags. */ + +#ifndef __USE_FILE_OFFSET64 +# define F_GETLK 5 /* Get record locking info. */ +# define F_SETLK 6 /* Set record locking info (non-blocking). */ +# define F_SETLKW 7 /* Set record locking info (blocking). */ +#else +# define F_GETLK F_GETLK64 /* Get record locking info. */ +# define F_SETLK F_SETLK64 /* Set record locking info (non-blocking).*/ +# define F_SETLKW F_SETLKW64 /* Set record locking info (blocking). */ +#endif + +#define F_GETLK64 12 /* Get record locking info. */ +#define F_SETLK64 13 /* Set record locking info (non-blocking). */ +#define F_SETLKW64 14 /* Set record locking info (blocking). */ + +#if defined __USE_BSD || defined __USE_XOPEN2K +# define F_SETOWN 8 /* Get owner of socket (receiver of SIGIO). */ +# define F_GETOWN 9 /* Set owner of socket (receiver of SIGIO). */ +#endif + +#ifdef __USE_GNU +# define F_SETSIG 10 /* Set number of signal to be sent. */ +# define F_GETSIG 11 /* Get number of signal to be sent. */ +#endif + +#ifdef __USE_GNU +# define F_SETLEASE 1024 /* Set a lease. */ +# define F_GETLEASE 1025 /* Enquire what lease is active. */ +# define F_NOTIFY 1026 /* Request notfications on a directory. */ +#endif + +/* For F_[GET|SET]FL. */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* For posix fcntl() and `l_type' field of a `struct flock' for lockf(). */ +#define F_RDLCK 0 /* Read lock. */ +#define F_WRLCK 1 /* Write lock. */ +#define F_UNLCK 2 /* Remove lock. */ + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ + +#ifdef __USE_BSD +/* Operations for bsd flock(), also used by the kernel implementation */ +# define LOCK_SH 1 /* shared lock */ +# define LOCK_EX 2 /* exclusive lock */ +# define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +# define LOCK_UN 8 /* remove lock */ +#endif + +#ifdef __USE_GNU +# define LOCK_MAND 32 /* This is a mandatory flock: */ +# define LOCK_READ 64 /* ... which allows concurrent read operations. */ +# define LOCK_WRITE 128 /* ... which allows concurrent write operations. */ +# define LOCK_RW 192 /* ... Which allows concurrent read & write operations. */ +#endif + +#ifdef __USE_GNU +/* Types of directory notifications that may be requested with F_NOTIFY. */ +# define DN_ACCESS 0x00000001 /* File accessed. */ +# define DN_MODIFY 0x00000002 /* File modified. */ +# define DN_CREATE 0x00000004 /* File created. */ +# define DN_DELETE 0x00000008 /* File removed. */ +# define DN_RENAME 0x00000010 /* File renamed. */ +# define DN_ATTRIB 0x00000020 /* File changed attibutes. */ +# define DN_MULTISHOT 0x80000000 /* Don't remove notifier. */ +#endif + +struct flock + { + short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */ + short int l_whence; /* Where `l_start' is relative to (like `lseek'). */ +#ifndef __USE_FILE_OFFSET64 + __off_t l_start; /* Offset where the lock begins. */ + __off_t l_len; /* Size of the locked area; zero means until EOF. */ +#else + __off64_t l_start; /* Offset where the lock begins. */ + __off64_t l_len; /* Size of the locked area; zero means until EOF. */ +#endif + __pid_t l_pid; /* Process holding the lock. */ + }; + +#ifdef __USE_LARGEFILE64 +struct flock64 + { + short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */ + short int l_whence; /* Where `l_start' is relative to (like `lseek'). */ + __off64_t l_start; /* Offset where the lock begins. */ + __off64_t l_len; /* Size of the locked area; zero means until EOF. */ + __pid_t l_pid; /* Process holding the lock. */ + }; +#endif + +/* Define some more compatibility macros to be backward compatible with + BSD systems which did not managed to hide these kernel macros. */ +#ifdef __USE_BSD +# define FAPPEND O_APPEND +# define FFSYNC O_FSYNC +# define FASYNC O_ASYNC +# define FNONBLOCK O_NONBLOCK +# define FNDELAY O_NDELAY +#endif /* Use BSD. */ + +/* Advise to `posix_fadvise'. */ +#ifdef __USE_XOPEN2K +# define POSIX_FADV_NORMAL 0 /* No further special treatment. */ +# define POSIX_FADV_RANDOM 1 /* Expect random page references. */ +# define POSIX_FADV_SEQUENTIAL 2 /* Expect sequential page references. */ +# define POSIX_FADV_WILLNEED 3 /* Will need these pages. */ +# define POSIX_FADV_DONTNEED 4 /* Don't need these pages. */ +# define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */ +#endif + +#if defined __USE_GNU && defined __UCLIBC_LINUX_SPECIFIC__ +/* Flags for SYNC_FILE_RANGE. */ +# define SYNC_FILE_RANGE_WAIT_BEFORE 1 /* Wait upon writeout of all pages + in the range before performing the + write. */ +# define SYNC_FILE_RANGE_WRITE 2 /* Initiate writeout of all those + dirty pages in the range which are + not presently under writeback. */ +# define SYNC_FILE_RANGE_WAIT_AFTER 4 /* Wait upon writeout of all pages in + the range after performing the + write. */ + +/* Flags for SPLICE and VMSPLICE. */ +# define SPLICE_F_MOVE 1 /* Move pages instead of copying. */ +# define SPLICE_F_NONBLOCK 2 /* Don't block on the pipe splicing + (but we may still block on the fd + we splice from/to). */ +# define SPLICE_F_MORE 4 /* Expect more data. */ +# define SPLICE_F_GIFT 8 /* Pages passed in are a gift. */ +#endif + +__BEGIN_DECLS + +#if defined __USE_GNU && defined __UCLIBC_LINUX_SPECIFIC__ + +/* Provide kernel hint to read ahead. */ +extern ssize_t readahead (int __fd, __off64_t __offset, size_t __count) + __THROW; + + +/* Selective file content synch'ing. */ +extern int sync_file_range (int __fd, __off64_t __from, __off64_t __to, + unsigned int __flags); + +/* Splice address range into a pipe. */ +extern ssize_t vmsplice (int __fdout, const struct iovec *__iov, + size_t __count, unsigned int __flags); + +/* Splice two files together. */ +extern ssize_t splice (int __fdin, __off64_t *__offin, int __fdout, + __off64_t *__offout, size_t __len, + unsigned int __flags); + +/* In-kernel implementation of tee for pipe buffers. */ +extern ssize_t tee (int __fdin, int __fdout, size_t __len, + unsigned int __flags); + +#endif +__END_DECLS diff --git a/libc/sysdeps/linux/or1k/bits/kernel_stat.h b/libc/sysdeps/linux/or1k/bits/kernel_stat.h new file mode 100644 index 0000000..9c8abf6 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/kernel_stat.h @@ -0,0 +1,59 @@ +/* taken from linux/include/asm-or1k/stat.h */ + +#ifndef _BITS_STAT_STRUCT_H +#define _BITS_STAT_STRUCT_H + +#ifndef _LIBC +#error bits/kernel_stat.h is for internal uClibc use only! +#endif + +struct kernel_stat { + unsigned long st_dev; /* Device. */ + unsigned long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long st_rdev; /* Device number, if device. */ + unsigned long __pad1; + long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + int __pad2; + long st_blocks; /* Number 512-byte blocks allocated. */ + struct timespec st_atim; + struct timespec st_mtim; + struct timespec st_ctim; + /* + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + */ + unsigned int __unused4; + unsigned int __unused5; +}; + +/* This matches struct stat64 in glibc2.1. + */ +struct kernel_stat64 { + unsigned long long st_dev; /* Device. */ + unsigned long long st_ino; /* File serial number. */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long long st_rdev; /* Device number, if device. */ + unsigned long long __pad1; + long long st_size; /* Size of file, in bytes. */ + int st_blksize; /* Optimal block size for I/O. */ + int __pad2; + long long st_blocks; /* Number 512-byte blocks allocated. */ + struct timespec st_atim; + struct timespec st_mtim; + struct timespec st_ctim; + unsigned int __unused4; + unsigned int __unused5; +}; +#endif diff --git a/libc/sysdeps/linux/or1k/bits/kernel_types.h b/libc/sysdeps/linux/or1k/bits/kernel_types.h new file mode 100644 index 0000000..4c5fe3e --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/kernel_types.h @@ -0,0 +1 @@ +#include <asm/posix_types.h> diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/bits/machine-gmon.h similarity index 61% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/bits/machine-gmon.h index 1e220a8..15a1773 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/bits/machine-gmon.h @@ -1,4 +1,5 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* or1k-specific implementation of profiling support. + Copyright (C) 1997 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -16,22 +17,15 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 +/* We need a special version of the `mcount' function because it has + to preserve more registers than your usual function. */ - .globl pthread_spin_lock -pthread_spin_lock: +void __mcount_internal (unsigned long frompc, unsigned long selfpc); - entry a1, 16 +#define _MCOUNT_DECL(frompc, selfpc) \ +void __mcount_internal (unsigned long frompc, unsigned long selfpc) - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +/* Define MCOUNT as empty since we have the implementation in another + file. */ +#define MCOUNT diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/bits/setjmp.h similarity index 70% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/bits/setjmp.h index 1e220a8..ad93b19 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/bits/setjmp.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* Copyright (C) 1997, 1998, 2000 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -16,22 +16,17 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 +/* Define the machine-dependent type `jmp_buf'. or1k version. */ - .globl pthread_spin_lock -pthread_spin_lock: +#ifndef _BITS_SETJMP_H +#define _BITS_SETJMP_H 1 - entry a1, 16 +#ifndef _SETJMP_H +# error "Never include <bits/setjmp.h> directly; use <setjmp.h> instead." +#endif - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 +#ifndef _ASM +typedef long int __jmp_buf[32]; +#endif - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +#endif diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/bits/sigcontextinfo.h similarity index 72% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/bits/sigcontextinfo.h index 1e220a8..369738a 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/bits/sigcontextinfo.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* Copyright (C) 1998, 1999, 2001 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -16,22 +16,9 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 +#include <signal.h> - .globl pthread_spin_lock -pthread_spin_lock: - - entry a1, 16 - - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 - - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +#define SIGCONTEXT struct sigcontext * +#define SIGCONTEXT_EXTRA_ARGS +#define CALL_SIGHANDLER(handler, signo, ctx) \ + (handler)((signo), SIGCONTEXT_EXTRA_ARGS (ctx)) diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/bits/stackinfo.h similarity index 72% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/bits/stackinfo.h index 1e220a8..12d46a0 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/bits/stackinfo.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* Copyright (C) 1999 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -16,22 +16,13 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 +/* This file contains a bit of information about the stack allocation + of the processor. */ - .globl pthread_spin_lock -pthread_spin_lock: +#ifndef _STACKINFO_H +#define _STACKINFO_H 1 - entry a1, 16 +/* On or1k the stack grows down. */ +#define _STACK_GROWS_DOWN 1 - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 - - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +#endif /* stackinfo.h */ diff --git a/libc/sysdeps/linux/or1k/bits/syscalls.h b/libc/sysdeps/linux/or1k/bits/syscalls.h new file mode 100644 index 0000000..6a08d3c --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/syscalls.h @@ -0,0 +1,101 @@ +/* + * Based on arm/bits/syscalls.h + */ + +#ifndef _BITS_SYSCALLS_H +#define _BITS_SYSCALLS_H +#ifndef _SYSCALL_H +# error "Never use <bits/syscalls.h> directly; include <sys/syscall.h> instead." +#endif + +/* + Some of the sneaky macros in the code were taken from + glibc-2.3.2/sysdeps/unix/sysv/linux/arm/sysdep.h +*/ + +#ifdef __ASSEMBLER__ + +/* TODO: recheck this */ + +/* Call a given syscall, with arguments loaded. Unlike the DO_CALL + macro in glibc, this macro does not load syscall arguments. */ +#undef DO_CALL +#define DO_CALL(syscall_name) \ + l.lwz r11, =SYS_ify (syscall_name); \ + l.sys 1 \ + l.nop + +#else + +#include <errno.h> + +#define INTERNAL_SYSCALL_NCS(name, err, nr, args...) \ + ({ unsigned long __sys_result; \ + { \ + register long __sc_ret __asm__ ("r11") = name; \ + LOAD_ARGS_##nr (args) \ + __asm__ __volatile__ ("l.sys 1" \ + : "=r" (__sc_ret) ASM_ARGS_OUT_##nr \ + : "0" (__sc_ret) ASM_ARGS_IN_##nr \ + : ASM_CLOBBERS_##nr \ + "r12", "r13", "r15", "r17", "r19", \ + "r21", "r23", "r25", "r27", "r29", \ + "r31"); \ + __asm__ __volatile__ ("l.nop"); \ + __sys_result = __sc_ret; \ + } \ + (long) __sys_result; }) + +/* : "0", "1", "2", "3", "4", "5", "6", \ */ +/* : ASM_CLOBBERS_##nr, \ */ + +#define LOAD_ARGS_0() + +#define ASM_ARGS_OUT_0 +#define ASM_ARGS_IN_0 +#define ASM_CLOBBERS_0 "r3", ASM_CLOBBERS_1 + +#define LOAD_ARGS_1(a) \ + LOAD_ARGS_0 () \ + register long __a __asm__ ("r3") = (long)(a); +#define ASM_ARGS_OUT_1 ASM_ARGS_OUT_0, "=r" (__a) +#define ASM_ARGS_IN_1 ASM_ARGS_IN_0, "1" (__a) +#define ASM_CLOBBERS_1 "r4", ASM_CLOBBERS_2 + +#define LOAD_ARGS_2(a, b) \ + LOAD_ARGS_1 (a) \ + register long __b __asm__ ("r4") = (long)(b); +#define ASM_ARGS_OUT_2 ASM_ARGS_OUT_1, "=r" (__b) +#define ASM_ARGS_IN_2 ASM_ARGS_IN_1, "2" (__b) +#define ASM_CLOBBERS_2 "r5", ASM_CLOBBERS_3 + +#define LOAD_ARGS_3(a, b, c) \ + LOAD_ARGS_2 (a, b) \ + register long __c __asm__ ("r5") = (long)(c); +#define ASM_ARGS_OUT_3 ASM_ARGS_OUT_2, "=r" (__c) +#define ASM_ARGS_IN_3 ASM_ARGS_IN_2, "3" (__c) +#define ASM_CLOBBERS_3 "r6", ASM_CLOBBERS_4 + +#define LOAD_ARGS_4(a, b, c, d) \ + LOAD_ARGS_3 (a, b, c) \ + register long __d __asm__ ("r6") = (long)(d); +#define ASM_ARGS_OUT_4 ASM_ARGS_OUT_3, "=r" (__d) +#define ASM_ARGS_IN_4 ASM_ARGS_IN_3, "4" (__d) +#define ASM_CLOBBERS_4 "r7", ASM_CLOBBERS_5 + +#define LOAD_ARGS_5(a, b, c, d, e) \ + LOAD_ARGS_4 (a, b, c, d) \ + register long __e __asm__ ("r7") = (long)(e); +#define ASM_ARGS_OUT_5 ASM_ARGS_OUT_4, "=r" (__e) +#define ASM_ARGS_IN_5 ASM_ARGS_IN_4, "5" (__e) +#define ASM_CLOBBERS_5 "r8", ASM_CLOBBERS_6 + +#define LOAD_ARGS_6(a, b, c, d, e, f) \ + LOAD_ARGS_5 (a, b, c, d, e) \ + register long __f __asm__ ("r8") = (long)(f); +#define ASM_ARGS_OUT_6 ASM_ARGS_OUT_5, "=r" (__f) +#define ASM_ARGS_IN_6 ASM_ARGS_IN_5, "6" (__f) +#define ASM_CLOBBERS_6 + +#endif /* __ASSEMBLER__ */ +#endif /* _BITS_SYSCALLS_H */ diff --git a/libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h b/libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h new file mode 100644 index 0000000..30ae443 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/uClibc_arch_features.h @@ -0,0 +1,44 @@ +/* + * Track misc arch-specific features that aren't config options + */ + +#ifndef _BITS_UCLIBC_ARCH_FEATURES_H +#define _BITS_UCLIBC_ARCH_FEATURES_H + +#undef _ERRNO_H +#undef EDEADLOCK /*Use Linux*/ + +/* instruction used when calling abort() to kill yourself */ +#define __UCLIBC_ABORT_INSTRUCTION__ ".long 0xbfffffff" + +/* can your target use syscall6() for mmap ? */ +#define __UCLIBC_MMAP_HAS_6_ARGS__ + +/* does your target use syscall4() for truncate64 ? (32bit arches only) */ +#undef __UCLIBC_TRUNCATE64_HAS_4_ARGS__ + +/* does your target have a broken create_module() ? */ +#undef __UCLIBC_BROKEN_CREATE_MODULE__ + +/* does your target have to worry about older [gs]etrlimit() ? */ +#undef __UCLIBC_HANDLE_OLDER_RLIMIT__ + +/* does your target have an asm .set ? */ +#define __UCLIBC_HAVE_ASM_SET_DIRECTIVE__ + +/* define if target doesn't like .global */ +#undef __UCLIBC_ASM_GLOBAL_DIRECTIVE__ + +/* define if target supports .weak */ +#define __UCLIBC_HAVE_ASM_WEAK_DIRECTIVE__ + +/* define if target supports .weakext */ +#undef __UCLIBC_HAVE_ASM_WEAKEXT_DIRECTIVE__ + +/* needed probably only for ppc64 */ +#undef __UCLIBC_HAVE_ASM_GLOBAL_DOT_NAME__ + +/* define if target supports IEEE signed zero floats */ +#define __UCLIBC_HAVE_SIGNED_ZERO__ + +#endif /* _BITS_UCLIBC_ARCH_FEATURES_H */ diff --git a/libc/sysdeps/linux/or1k/bits/uClibc_page.h b/libc/sysdeps/linux/or1k/bits/uClibc_page.h new file mode 100644 index 0000000..80c3bd9 --- /dev/null +++ b/libc/sysdeps/linux/or1k/bits/uClibc_page.h @@ -0,0 +1,35 @@ +/* Copyright (C) 2004 Erik Andersen + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * The GNU C Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with the GNU C Library; if not, write to the Free + * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA. + */ + +/* Supply an architecture specific value for PAGE_SIZE and friends. */ + +#ifndef _UCLIBC_PAGE_H +#define _UCLIBC_PAGE_H + +/* PAGE_SHIFT determines the page size -- in this case 4096 */ +#define PAGE_SHIFT 13 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* Some architectures always use 12 as page shift for mmap2() eventhough the + * real PAGE_SHIFT != 12. Other architectures use the same value as + * PAGE_SHIFT... + */ +#define MMAP2_PAGE_SHIFT PAGE_SHIFT + +#endif /* _UCLIBC_PAGE_H */ diff --git a/libc/sysdeps/linux/metag/bits/wordsize.h b/libc/sysdeps/linux/or1k/bits/wordsize.h similarity index 100% copy from libc/sysdeps/linux/metag/bits/wordsize.h copy to libc/sysdeps/linux/or1k/bits/wordsize.h diff --git a/libc/sysdeps/linux/or1k/brk.c b/libc/sysdeps/linux/or1k/brk.c new file mode 100644 index 0000000..f8183db --- /dev/null +++ b/libc/sysdeps/linux/or1k/brk.c @@ -0,0 +1,23 @@ +/* From libc-5.3.12 */ + +#include <errno.h> +#include <unistd.h> +#include <sys/syscall.h> +libc_hidden_proto(brk) +extern void * ___brk_addr; + +extern int __init_brk (void); +extern void *_brk(void *ptr); + +int brk(void * end_data_seg) +{ + if (__init_brk () == 0) + { + ___brk_addr = _brk(end_data_seg); + if (___brk_addr == end_data_seg) + return 0; + __set_errno(ENOMEM); + } + return -1; +} +libc_hidden_def(brk) diff --git a/libc/sysdeps/linux/or1k/clone.c b/libc/sysdeps/linux/or1k/clone.c new file mode 100644 index 0000000..ebb048a --- /dev/null +++ b/libc/sysdeps/linux/or1k/clone.c @@ -0,0 +1,88 @@ +/* + * clone syscall for OpenRISC + * + * Copyright (c) 2010 Jonas Bonn <jonas(a)southpole.se> + * Copyright (C) 2003 John Williams <jwilliams(a)itee.uq.edu.au> + * Copyright (C) 2002,03 NEC Electronics Corporation + * Copyright (C) 2002,03 Miles Bader <miles(a)gnu.org> + * + * This file is subject to the terms and conditions of the GNU Lesser + * General Public License. See the file COPYING.LIB in the main + * directory of this archive for more details. + * + * OpenRISC port by Jonas Bonn <jonas(a)southpole.se> + */ + +#include <errno.h> +#include <sys/syscall.h> +#include <sched.h> +#include <unistd.h> + +/* The userland implementation is: + int clone (int (*fn)(void *arg), void *child_stack, int flags, void *arg, ...) + the kernel entry is: + int clone (long flags, void *child_stack) +*/ + +int +clone (int (*fn)(void *arg), void *child_stack, int flags, void *arg, ...) +{ + int err; + + /* OK, here's the skinny on this one... + * OR1K GCC does weird things with varargs functions... the last + * parameter is NEVER passed on the stack -- i.e. arg, in this case. + * So we need to push at least 'arg' onto the child stack so that + * the new thread can find it. Just to be totally safe, we'll + * push both 'fn' and 'arg'; that way we don't need to care what + * GCC does with parameters, whether they are passed in registers + * or on stack. + */ + + /* Put 'fn' and 'arg' on child stack */ + __asm__ __volatile__ ( + "l.sw -4(%0),%1;" + "l.sw -8(%0),%2;" + : + : "r" (child_stack), "r" (fn), "r" (arg) + ); + + /* Sanity check the arguments */ + err = -EINVAL; + if (!fn) + goto syscall_error; + if (!child_stack) + goto syscall_error; + + err = INLINE_SYSCALL(clone, 2, flags, child_stack); + + /* NB: from here you are in child thread or parent thread. + * + * Do not use any functions here that may write data _up_ + * onto the stack because they will overwrite the child's + * thread descriptor... i.e. don't use printf + */ + + if (err < 0) + goto syscall_error; + else if (err != 0) { + return err; + } + + /* NB: from here you exclusively in child thread */ + + /* Grab 'fn' and 'arg' from child stack */ + __asm__ __volatile__ ( + "l.lwz %0,-4(%2);" + "l.lwz %1,-8(%2);" + : "=&r" (fn), "=r" (arg) + : "r" (child_stack) + : "0", "1" + ); + + _exit(fn(arg)); + +syscall_error: + __set_errno (-err); + return -1; +} diff --git a/libc/sysdeps/linux/or1k/crt1.S b/libc/sysdeps/linux/or1k/crt1.S new file mode 100644 index 0000000..c1926be --- /dev/null +++ b/libc/sysdeps/linux/or1k/crt1.S @@ -0,0 +1,144 @@ +/* Copyright (C) 1995, 1996, 1997, 1998, 2001, 2002, 2005 + Free Software Foundation, Inc. + + Copyright (C) 2010 Embecosm Limited + + Contributor Jeremy Bennett <jeremy.bennett(a)embecosm.com> + Contributor Joern Rennecke <joern.rennecke(a)embecosm.com> + With other contributions from the OpenCores community. + + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file with other + programs, and to distribute those programs without any restriction + coming from the use of this file. (The GNU Lesser General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into another program.) + + Note that people who make modified versions of this file are not + obligated to grant this special exception for their modified + versions; it is their choice whether to do so. The GNU Lesser + General Public License gives permission to release a modified + version without this exception; this exception also makes it + possible to release a modified version which carries forward this + exception. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* Stick in a dummy reference to main(), so that if an application + * is linking when the main() function is in a static library (.a) + * we can be sure that main() actually gets linked in */ +.type main,%function + +/* This is the canonical entry point, usually the first thing in the text + segment. + + sp The stack contains the arguments and environment: + 0(sp) argc + 4(sp) argv[0] + ... + (4*argc)(sp) NULL + (4*(argc+1))(sp) envp[0] + ... + NULL +*/ + +#include <features.h> + +.text + .globl _start + .type _start,%function + +.global _start +_start: + +#ifdef __PIC__ + /* Obtain a pointer to .got in r16 */ + l.jal .LPC0 +#ifndef __OR1K_NODELAY__ + l.nop +#endif +.LPC0: + l.movhi r16, gotpchi(_GLOBAL_OFFSET_TABLE_+(.-.LPC0)) + l.ori r16, r16, gotpclo(_GLOBAL_OFFSET_TABLE_+(.-.LPC0)) + l.add r16, r16, r9 +#endif + + /* Push stack limit onto the stack */ + /* Provides highest stack address to user code (as stack grows + * downwards + * This is the seventh argument to __uClibc_main and thus needs to + * be passed on the stack + */ + l.sw -4(r1),r1 + + /* Take values for argc and argv off the stack. + * These will be passed as arguments two and three to __uClibc_main + * and thus go in registers r4 and r5, respectively + */ + l.lwz r4,0(r1) + l.addi r5,r1,4 + +#ifdef __PIC__ + l.lwz r3,got(main)(r16) +#else + l.movhi r3,hi(main) + l.ori r3,r3,lo(main) +#endif + + /* Put the constructor and destructor initialization as args four and + five into r6 and r7 */ +#ifdef __PIC__ + l.lwz r6, got(_init)(r16) + l.lwz r7, got(_fini)(r16) +#else + l.movhi r6,hi(_init) + l.ori r6,r6,lo(_init) + l.movhi r7,hi(_fini) + l.ori r7,r7,lo(_fini) +#endif + + /* rtld_fini = NULL */ + l.movhi r8, 0 + + /* Adjust stack to account for a total of 7 args (i.e. the last one is + on the stack. */ + l.addi r1,r1,-4 + + /* Clear the frame pointer and link register since this is the + * outermost frame. + */ + l.add r2,r0,r0 + l.add r9,r0,r0 + + /* Let the libc call main and exit with its return code. */ +#ifdef __PIC__ + l.j plt(__uClibc_main) +#else + l.j __uClibc_main +#endif + l.nop + +/* Define a symbol for the first piece of initialized data. */ + .data + .globl __data_start +__data_start: + .long 0 + .weak data_start + data_start = __data_start diff --git a/libc/sysdeps/linux/or1k/crti.S b/libc/sysdeps/linux/or1k/crti.S new file mode 100644 index 0000000..a96476b --- /dev/null +++ b/libc/sysdeps/linux/or1k/crti.S @@ -0,0 +1,11 @@ + .section .init + .global _init +_init: + l.addi r1,r1,-4 + l.sw 0(r1),r9 + + .section .fini + .global _fini +_fini: + l.addi r1,r1,-4 + l.sw 0(r1),r9 diff --git a/libc/sysdeps/linux/or1k/crtn.S b/libc/sysdeps/linux/or1k/crtn.S new file mode 100644 index 0000000..b3e8688 --- /dev/null +++ b/libc/sysdeps/linux/or1k/crtn.S @@ -0,0 +1,9 @@ + .section .init + l.lwz r9,0(r1) + l.jr r9 + l.addi r1,r1,4 + + .section .fini + l.lwz r9,0(r1) + l.jr r9 + l.addi r1,r1,4 diff --git a/libc/sysdeps/linux/or1k/jmpbuf-offsets.h b/libc/sysdeps/linux/or1k/jmpbuf-offsets.h new file mode 100644 index 0000000..8cd82a1 --- /dev/null +++ b/libc/sysdeps/linux/or1k/jmpbuf-offsets.h @@ -0,0 +1,8 @@ +#include <features.h> + +#define JB_SR 0 +#define JB_GPRS 1 +#define JB_SP 1 +#define JB_LR 9 +#define JB_RV 11 +#define JB_SIZE (32*4) diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/jmpbuf-unwind.h similarity index 57% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/jmpbuf-unwind.h index 1e220a8..436073b 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/jmpbuf-unwind.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* Copyright (C) 2005,2006 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -12,26 +12,13 @@ Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - 02111-1307 USA. */ + License along with the GNU C Library. If not, see + <http://www.gnu.org/licenses/>. */ - .text - .align 4 +#include <setjmp.h> +#include <jmpbuf-offsets.h> - .globl pthread_spin_lock -pthread_spin_lock: - - entry a1, 16 - - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 - - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +/* Test if longjmp to JMPBUF would unwind the frame + containing a local variable at ADDRESS. */ +#define _JMPBUF_UNWINDS(jmpbuf, address) \ + ((void *) (address) < (void *) (jmpbuf)[JB_SP]) diff --git a/libc/sysdeps/linux/or1k/sbrk.c b/libc/sysdeps/linux/or1k/sbrk.c new file mode 100644 index 0000000..bd0635f --- /dev/null +++ b/libc/sysdeps/linux/or1k/sbrk.c @@ -0,0 +1,27 @@ +/* From libc-5.3.12 */ + +#include <errno.h> +#include <unistd.h> +#include <sys/syscall.h> +libc_hidden_proto(sbrk) + +extern void * ___brk_addr; + +extern int __init_brk (void); +extern void *_brk(void *ptr); + +void * +sbrk(intptr_t increment) +{ + if (__init_brk () == 0) + { + char * tmp = (char*)___brk_addr+increment; + ___brk_addr = _brk(tmp); + if (___brk_addr == tmp) + return tmp-increment; + __set_errno(ENOMEM); + return ((void *) -1); + } + return ((void *) -1); +} +libc_hidden_def(sbrk) diff --git a/libc/sysdeps/linux/or1k/setjmp.S b/libc/sysdeps/linux/or1k/setjmp.S new file mode 100644 index 0000000..2814f2f --- /dev/null +++ b/libc/sysdeps/linux/or1k/setjmp.S @@ -0,0 +1,96 @@ +/* setjmp for or1k + + Based on: + setjmp for PowerPC. + Copyright (C) 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include "spr_defs.h" +#include <jmpbuf-offsets.h> + +#ifdef __UCLIBC_HAS_FLOATS__ +#define FP(x...) x +#else +#define FP(x...) +#endif + +.globl _setjmp +.type _setjmp, @function +.align 2 + +_setjmp: + l.addi r4,r0,0 /* Set second argument to 0. */ + l.j .Local_sigsetjmp + l.nop +.size _setjmp,.-_setjmp + +.globl __setjmp +.type __setjmp, @function +.align 2 + +__setjmp: + l.addi r4,r0,1 /* Set second argument to 1. */ + l.j .Local_sigsetjmp + l.nop +.size __setjmp,.-__setjmp + +.globl setjmp +.set setjmp,__setjmp + +.globl __sigsetjmp +.type __sigsetjmp, @function +.align 2 + +__sigsetjmp: +.Local_sigsetjmp: +# l.mfspr r11,r0,SPR_SR +# l.sw (JB_SR*4)(r3),r11 + l.sw ((JB_GPRS+0)*4)(r3),r1 + l.sw ((JB_GPRS+1)*4)(r3),r2 +/* l.sw ((JB_GPRS+2)*4)(r3),r3*/ + l.sw ((JB_GPRS+3)*4)(r3),r4 + l.sw ((JB_GPRS+4)*4)(r3),r5 + l.sw ((JB_GPRS+5)*4)(r3),r6 + l.sw ((JB_GPRS+6)*4)(r3),r7 + l.sw ((JB_GPRS+7)*4)(r3),r8 + l.sw ((JB_GPRS+8)*4)(r3),r9 + l.sw ((JB_GPRS+9)*4)(r3),r10 + l.sw ((JB_GPRS+10)*4)(r3),r11 + l.sw ((JB_GPRS+11)*4)(r3),r12 + l.sw ((JB_GPRS+12)*4)(r3),r13 + l.sw ((JB_GPRS+13)*4)(r3),r14 + l.sw ((JB_GPRS+14)*4)(r3),r15 + l.sw ((JB_GPRS+15)*4)(r3),r16 + l.sw ((JB_GPRS+16)*4)(r3),r17 + l.sw ((JB_GPRS+17)*4)(r3),r18 + l.sw ((JB_GPRS+18)*4)(r3),r19 + l.sw ((JB_GPRS+19)*4)(r3),r20 + l.sw ((JB_GPRS+20)*4)(r3),r21 + l.sw ((JB_GPRS+21)*4)(r3),r22 + l.sw ((JB_GPRS+22)*4)(r3),r23 + l.sw ((JB_GPRS+23)*4)(r3),r24 + l.sw ((JB_GPRS+24)*4)(r3),r25 + l.sw ((JB_GPRS+25)*4)(r3),r26 + l.sw ((JB_GPRS+26)*4)(r3),r27 + l.sw ((JB_GPRS+27)*4)(r3),r28 + l.sw ((JB_GPRS+28)*4)(r3),r29 + l.sw ((JB_GPRS+29)*4)(r3),r30 + l.sw ((JB_GPRS+30)*4)(r3),r31 + l.j __sigjmp_save + l.nop +.size __sigsetjmp,.-__sigsetjmp diff --git a/libc/sysdeps/linux/or1k/spr_defs.h b/libc/sysdeps/linux/or1k/spr_defs.h new file mode 100644 index 0000000..263d3e4 --- /dev/null +++ b/libc/sysdeps/linux/or1k/spr_defs.h @@ -0,0 +1,429 @@ +/* spr_defs.h -- Defines OR1K architecture specific special-purpose registers + Copyright (C) 1999 Damjan Lampret, lampret(a)opencores.org + +This file is part of OpenRISC 1000 Architectural Simulator. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* This file is also used by microkernel test bench. Among +others it is also used in assembly file(s). */ + +/* Definition of special-purpose registers (SPRs) */ + +#define MAX_GRPS (32) +#define MAX_SPRS_PER_GRP_BITS (11) +#define MAX_SPRS_PER_GRP (1 << MAX_SPRS_PER_GRP_BITS) +#define MAX_SPRS (0x10000) + +/* Base addresses for the groups */ +#define SPRGROUP_SYS (0<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_DMMU (1<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_IMMU (2<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_DC (3<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_IC (4<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_MAC (5<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_D (6<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_PC (7<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_PM (8<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_PIC (9<< MAX_SPRS_PER_GRP_BITS) +#define SPRGROUP_TT (10<< MAX_SPRS_PER_GRP_BITS) + +/* System control and status group */ +#define SPR_VR (SPRGROUP_SYS + 0) +#define SPR_UPR (SPRGROUP_SYS + 1) +#define SPR_CPUCFGR (SPRGROUP_SYS + 2) +#define SPR_DMMUCFGR (SPRGROUP_SYS + 3) +#define SPR_IMMUCFGR (SPRGROUP_SYS + 4) +#define SPR_DCCFGR (SPRGROUP_SYS + 5) +#define SPR_ICCFGR (SPRGROUP_SYS + 6) +#define SPR_DCFGR (SPRGROUP_SYS + 7) +#define SPR_PCCFGR (SPRGROUP_SYS + 8) +#define SPR_NPC (SPRGROUP_SYS + 16) /* CZ 21/06/01 */ +#define SPR_SR (SPRGROUP_SYS + 17) /* CZ 21/06/01 */ +#define SPR_PPC (SPRGROUP_SYS + 18) /* CZ 21/06/01 */ +#define SPR_EPCR_BASE (SPRGROUP_SYS + 32) /* CZ 21/06/01 */ +#define SPR_EPCR_LAST (SPRGROUP_SYS + 47) /* CZ 21/06/01 */ +#define SPR_EEAR_BASE (SPRGROUP_SYS + 48) +#define SPR_EEAR_LAST (SPRGROUP_SYS + 63) +#define SPR_ESR_BASE (SPRGROUP_SYS + 64) +#define SPR_ESR_LAST (SPRGROUP_SYS + 79) + +/* Data MMU group */ +#define SPR_DMMUCR (SPRGROUP_DMMU + 0) +#define SPR_DTLBMR_BASE(WAY) (SPRGROUP_DMMU + 0x200 + (WAY) * 0x100) +#define SPR_DTLBMR_LAST(WAY) (SPRGROUP_DMMU + 0x27f + (WAY) * 0x100) +#define SPR_DTLBTR_BASE(WAY) (SPRGROUP_DMMU + 0x280 + (WAY) * 0x100) +#define SPR_DTLBTR_LAST(WAY) (SPRGROUP_DMMU + 0x2ff + (WAY) * 0x100) + +/* Instruction MMU group */ +#define SPR_IMMUCR (SPRGROUP_IMMU + 0) +#define SPR_ITLBMR_BASE(WAY) (SPRGROUP_IMMU + 0x200 + (WAY) * 0x100) +#define SPR_ITLBMR_LAST(WAY) (SPRGROUP_IMMU + 0x27f + (WAY) * 0x100) +#define SPR_ITLBTR_BASE(WAY) (SPRGROUP_IMMU + 0x280 + (WAY) * 0x100) +#define SPR_ITLBTR_LAST(WAY) (SPRGROUP_IMMU + 0x2ff + (WAY) * 0x100) + +/* Data cache group */ +#define SPR_DCCR (SPRGROUP_DC + 0) +#define SPR_DCBPR (SPRGROUP_DC + 1) +#define SPR_DCBFR (SPRGROUP_DC + 2) +#define SPR_DCBIR (SPRGROUP_DC + 3) +#define SPR_DCBWR (SPRGROUP_DC + 4) +#define SPR_DCBLR (SPRGROUP_DC + 5) +#define SPR_DCR_BASE(WAY) (SPRGROUP_DC + 0x200 + (WAY) * 0x200) +#define SPR_DCR_LAST(WAY) (SPRGROUP_DC + 0x3ff + (WAY) * 0x200) + +/* Instruction cache group */ +#define SPR_ICCR (SPRGROUP_IC + 0) +#define SPR_ICBPR (SPRGROUP_IC + 1) +#define SPR_ICBIR (SPRGROUP_IC + 2) +#define SPR_ICBLR (SPRGROUP_IC + 3) +#define SPR_ICR_BASE(WAY) (SPRGROUP_IC + 0x200 + (WAY) * 0x200) +#define SPR_ICR_LAST(WAY) (SPRGROUP_IC + 0x3ff + (WAY) * 0x200) + +/* MAC group */ +#define SPR_MACLO (SPRGROUP_MAC + 1) +#define SPR_MACHI (SPRGROUP_MAC + 2) + +/* Debug group */ +#define SPR_DVR(N) (SPRGROUP_D + (N)) +#define SPR_DCR(N) (SPRGROUP_D + 8 + (N)) +#define SPR_DMR1 (SPRGROUP_D + 16) +#define SPR_DMR2 (SPRGROUP_D + 17) +#define SPR_DWCR0 (SPRGROUP_D + 18) +#define SPR_DWCR1 (SPRGROUP_D + 19) +#define SPR_DSR (SPRGROUP_D + 20) +#define SPR_DRR (SPRGROUP_D + 21) + +/* Performance counters group */ +#define SPR_PCCR(N) (SPRGROUP_PC + (N)) +#define SPR_PCMR(N) (SPRGROUP_PC + 8 + (N)) + +/* Power management group */ +#define SPR_PMR (SPRGROUP_PM + 0) + +/* PIC group */ +#define SPR_PICMR (SPRGROUP_PIC + 0) +#define SPR_PICPR (SPRGROUP_PIC + 1) +#define SPR_PICSR (SPRGROUP_PIC + 2) + +/* Tick Timer group */ +#define SPR_TTMR (SPRGROUP_TT + 0) +#define SPR_TTCR (SPRGROUP_TT + 1) + +/* + * Bit definitions for the Version Register + * + */ +#define SPR_VR_VER 0xffff0000 /* Processor version */ +#define SPR_VR_REV 0x0000003f /* Processor revision */ + +/* + * Bit definitions for the Unit Present Register + * + */ +#define SPR_UPR_UP 0x00000001 /* UPR present */ +#define SPR_UPR_DCP 0x00000002 /* Data cache present */ +#define SPR_UPR_ICP 0x00000004 /* Instruction cache present */ +#define SPR_UPR_DMP 0x00000008 /* Data MMU present */ +#define SPR_UPR_IMP 0x00000010 /* Instruction MMU present */ +#define SPR_UPR_OB32P 0x00000020 /* ORBIS32 present */ +#define SPR_UPR_OB64P 0x00000040 /* ORBIS64 present */ +#define SPR_UPR_OF32P 0x00000080 /* ORFPX32 present */ +#define SPR_UPR_OF64P 0x00000100 /* ORFPX64 present */ +#define SPR_UPR_OV32P 0x00000200 /* ORVDX32 present */ +#define SPR_UPR_OV64P 0x00000400 /* ORVDX64 present */ +#define SPR_UPR_DUP 0x00000800 /* Debug unit present */ +#define SPR_UPR_PCUP 0x00001000 /* Performance counters unit present */ +#define SPR_UPR_PMP 0x00002000 /* Power management present */ +#define SPR_UPR_PICP 0x00004000 /* PIC present */ +#define SPR_UPR_TTP 0x00008000 /* Tick timer present */ +#define SPR_UPR_SRP 0x00010000 /* Shadow registers present */ +#define SPR_UPR_RES 0x00fe0000 /* ORVDX32 present */ +#define SPR_UPR_CUST 0xff000000 /* Custom units */ + +/* + * Bit definitions for the Supervision Register + * + */ +#define SPR_SR_CID 0xf0000000 /* Context ID */ +#define SPR_SR_SUMRA 0x00010000 /* Supervisor SPR read access */ +#define SPR_SR_FO 0x00008000 /* Fixed one */ +#define SPR_SR_EPH 0x00004000 /* Exception Prefix High */ +#define SPR_SR_DSX 0x00002000 /* Delay Slot Exception */ +#define SPR_SR_OVE 0x00001000 /* Overflow flag Exception */ +#define SPR_SR_OV 0x00000800 /* Overflow flag */ +#define SPR_SR_CY 0x00000400 /* Carry flag */ +#define SPR_SR_F 0x00000200 /* Condition Flag */ +#define SPR_SR_CE 0x00000100 /* CID Enable */ +#define SPR_SR_LEE 0x00000080 /* Little Endian Enable */ +#define SPR_SR_IME 0x00000040 /* Instruction MMU Enable */ +#define SPR_SR_DME 0x00000020 /* Data MMU Enable */ +#define SPR_SR_ICE 0x00000010 /* Instruction Cache Enable */ +#define SPR_SR_DCE 0x00000008 /* Data Cache Enable */ +#define SPR_SR_IEE 0x00000004 /* Interrupt Exception Enable */ +#define SPR_SR_TEE 0x00000002 /* Tick timer Exception Enable */ +#define SPR_SR_SM 0x00000001 /* Supervisor Mode */ + +/* + * Bit definitions for the Data MMU Control Register + * + */ +#define SPR_DMMUCR_P2S 0x0000003e /* Level 2 Page Size */ +#define SPR_DMMUCR_P1S 0x000007c0 /* Level 1 Page Size */ +#define SPR_DMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */ +#define SPR_DMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */ + +/* + * Bit definitions for the Instruction MMU Control Register + * + */ +#define SPR_IMMUCR_P2S 0x0000003e /* Level 2 Page Size */ +#define SPR_IMMUCR_P1S 0x000007c0 /* Level 1 Page Size */ +#define SPR_IMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */ +#define SPR_IMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */ + +/* + * Bit definitions for the Data TLB Match Register + * + */ +#define SPR_DTLBMR_V 0x00000001 /* Valid */ +#define SPR_DTLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */ +#define SPR_DTLBMR_CID 0x0000003c /* Context ID */ +#define SPR_DTLBMR_LRU 0x000000c0 /* Least Recently Used */ +#define SPR_DTLBMR_VPN 0xfffff000 /* Virtual Page Number */ + +/* + * Bit definitions for the Data TLB Translate Register + * + */ +#define SPR_DTLBTR_CC 0x00000001 /* Cache Coherency */ +#define SPR_DTLBTR_CI 0x00000002 /* Cache Inhibit */ +#define SPR_DTLBTR_WBC 0x00000004 /* Write-Back Cache */ +#define SPR_DTLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */ +#define SPR_DTLBTR_A 0x00000010 /* Accessed */ +#define SPR_DTLBTR_D 0x00000020 /* Dirty */ +#define SPR_DTLBTR_URE 0x00000040 /* User Read Enable */ +#define SPR_DTLBTR_UWE 0x00000080 /* User Write Enable */ +#define SPR_DTLBTR_SRE 0x00000100 /* Supervisor Read Enable */ +#define SPR_DTLBTR_SWE 0x00000200 /* Supervisor Write Enable */ +#define SPR_DTLBTR_PPN 0xfffff000 /* Physical Page Number */ + +/* + * Bit definitions for the Instruction TLB Match Register + * + */ +#define SPR_ITLBMR_V 0x00000001 /* Valid */ +#define SPR_ITLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */ +#define SPR_ITLBMR_CID 0x0000003c /* Context ID */ +#define SPR_ITLBMR_LRU 0x000000c0 /* Least Recently Used */ +#define SPR_ITLBMR_VPN 0xfffff000 /* Virtual Page Number */ + +/* + * Bit definitions for the Instruction TLB Translate Register + * + */ +#define SPR_ITLBTR_CC 0x00000001 /* Cache Coherency */ +#define SPR_ITLBTR_CI 0x00000002 /* Cache Inhibit */ +#define SPR_ITLBTR_WBC 0x00000004 /* Write-Back Cache */ +#define SPR_ITLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */ +#define SPR_ITLBTR_A 0x00000010 /* Accessed */ +#define SPR_ITLBTR_D 0x00000020 /* Dirty */ +#define SPR_ITLBTR_SXE 0x00000040 /* User Read Enable */ +#define SPR_ITLBTR_UXE 0x00000080 /* User Write Enable */ +#define SPR_ITLBTR_PPN 0xfffff000 /* Physical Page Number */ + +/* + * Bit definitions for Data Cache Control register + * + */ +#define SPR_DCCR_EW 0x000000ff /* Enable ways */ + +/* + * Bit definitions for Insn Cache Control register + * + */ +#define SPR_ICCR_EW 0x000000ff /* Enable ways */ + +/* + * Bit definitions for Debug Control registers + * + */ +#define SPR_DCR_DP 0x00000001 /* DVR/DCR present */ +#define SPR_DCR_CC 0x0000000e /* Compare condition */ +#define SPR_DCR_SC 0x00000010 /* Signed compare */ +#define SPR_DCR_CT 0x000000e0 /* Compare to */ + +/* Bit results with SPR_DCR_CC mask */ +#define SPR_DCR_CC_MASKED 0x00000000 +#define SPR_DCR_CC_EQUAL 0x00000001 +#define SPR_DCR_CC_LESS 0x00000002 +#define SPR_DCR_CC_LESSE 0x00000003 +#define SPR_DCR_CC_GREAT 0x00000004 +#define SPR_DCR_CC_GREATE 0x00000005 +#define SPR_DCR_CC_NEQUAL 0x00000006 + +/* Bit results with SPR_DCR_CT mask */ +#define SPR_DCR_CT_DISABLED 0x00000000 +#define SPR_DCR_CT_IFEA 0x00000020 +#define SPR_DCR_CT_LEA 0x00000040 +#define SPR_DCR_CT_SEA 0x00000060 +#define SPR_DCR_CT_LD 0x00000080 +#define SPR_DCR_CT_SD 0x000000a0 +#define SPR_DCR_CT_LSEA 0x000000c0 + +/* + * Bit definitions for Debug Mode 1 register + * + */ +#define SPR_DMR1_CW0 0x00000003 /* Chain watchpoint 0 */ +#define SPR_DMR1_CW1 0x0000000c /* Chain watchpoint 1 */ +#define SPR_DMR1_CW2 0x00000030 /* Chain watchpoint 2 */ +#define SPR_DMR1_CW3 0x000000c0 /* Chain watchpoint 3 */ +#define SPR_DMR1_CW4 0x00000300 /* Chain watchpoint 4 */ +#define SPR_DMR1_CW5 0x00000c00 /* Chain watchpoint 5 */ +#define SPR_DMR1_CW6 0x00003000 /* Chain watchpoint 6 */ +#define SPR_DMR1_CW7 0x0000c000 /* Chain watchpoint 7 */ +#define SPR_DMR1_CW8 0x00030000 /* Chain watchpoint 8 */ +#define SPR_DMR1_CW9 0x000c0000 /* Chain watchpoint 9 */ +#define SPR_DMR1_CW10 0x00300000 /* Chain watchpoint 10 */ +#define SPR_DMR1_ST 0x00400000 /* Single-step trace*/ +#define SPR_DMR1_BT 0x00800000 /* Branch trace */ +#define SPR_DMR1_DXFW 0x01000000 /* Disable external force watchpoint */ + +/* + * Bit definitions for Debug Mode 2 register + * + */ +#define SPR_DMR2_WCE0 0x00000001 /* Watchpoint counter 0 enable */ +#define SPR_DMR2_WCE1 0x00000002 /* Watchpoint counter 0 enable */ +#define SPR_DMR2_AWTC 0x00001ffc /* Assign watchpoints to counters */ +#define SPR_DMR2_WGB 0x00ffe000 /* Watchpoints generating breakpoint */ + +/* + * Bit definitions for Debug watchpoint counter registers + * + */ +#define SPR_DWCR_COUNT 0x0000ffff /* Count */ +#define SPR_DWCR_MATCH 0xffff0000 /* Match */ + +/* + * Bit definitions for Debug stop register + * + */ +#define SPR_DSR_RSTE 0x00000001 /* Reset exception */ +#define SPR_DSR_BUSEE 0x00000002 /* Bus error exception */ +#define SPR_DSR_DPFE 0x00000004 /* Data Page Fault exception */ +#define SPR_DSR_IPFE 0x00000008 /* Insn Page Fault exception */ +#define SPR_DSR_TTE 0x00000010 /* iTick Timer exception */ +#define SPR_DSR_AE 0x00000020 /* Alignment exception */ +#define SPR_DSR_IIE 0x00000040 /* Illegal Instruction exception */ +#define SPR_DSR_IE 0x00000080 /* Interrupt exception */ +#define SPR_DSR_DME 0x00000100 /* DTLB miss exception */ +#define SPR_DSR_IME 0x00000200 /* ITLB miss exception */ +#define SPR_DSR_RE 0x00000400 /* Range exception */ +#define SPR_DSR_SCE 0x00000800 /* System call exception */ +#define SPR_DSR_SSE 0x00001000 /* Single Step Exception */ +#define SPR_DSR_TE 0x00002000 /* Trap exception */ + +/* + * Bit definitions for Debug reason register + * + */ +#define SPR_DRR_RSTE 0x00000001 /* Reset exception */ +#define SPR_DRR_BUSEE 0x00000002 /* Bus error exception */ +#define SPR_DRR_DPFE 0x00000004 /* Data Page Fault exception */ +#define SPR_DRR_IPFE 0x00000008 /* Insn Page Fault exception */ +#define SPR_DRR_TTE 0x00000010 /* Tick Timer exception */ +#define SPR_DRR_AE 0x00000020 /* Alignment exception */ +#define SPR_DRR_IIE 0x00000040 /* Illegal Instruction exception */ +#define SPR_DRR_IE 0x00000080 /* Interrupt exception */ +#define SPR_DRR_DME 0x00000100 /* DTLB miss exception */ +#define SPR_DRR_IME 0x00000200 /* ITLB miss exception */ +#define SPR_DRR_RE 0x00000400 /* Range exception */ +#define SPR_DRR_SCE 0x00000800 /* System call exception */ +#define SPR_DRR_TE 0x00001000 /* Trap exception */ + +/* + * Bit definitions for Performance counters mode registers + * + */ +#define SPR_PCMR_CP 0x00000001 /* Counter present */ +#define SPR_PCMR_UMRA 0x00000002 /* User mode read access */ +#define SPR_PCMR_CISM 0x00000004 /* Count in supervisor mode */ +#define SPR_PCMR_CIUM 0x00000008 /* Count in user mode */ +#define SPR_PCMR_LA 0x00000010 /* Load access event */ +#define SPR_PCMR_SA 0x00000020 /* Store access event */ +#define SPR_PCMR_IF 0x00000040 /* Instruction fetch event*/ +#define SPR_PCMR_DCM 0x00000080 /* Data cache miss event */ +#define SPR_PCMR_ICM 0x00000100 /* Insn cache miss event */ +#define SPR_PCMR_IFS 0x00000200 /* Insn fetch stall event */ +#define SPR_PCMR_LSUS 0x00000400 /* LSU stall event */ +#define SPR_PCMR_BS 0x00000800 /* Branch stall event */ +#define SPR_PCMR_DTLBM 0x00001000 /* DTLB miss event */ +#define SPR_PCMR_ITLBM 0x00002000 /* ITLB miss event */ +#define SPR_PCMR_DDS 0x00004000 /* Data dependency stall event */ +#define SPR_PCMR_WPE 0x03ff8000 /* Watchpoint events */ + +/* + * Bit definitions for the Power management register + * + */ +#define SPR_PMR_SDF 0x0000000f /* Slow down factor */ +#define SPR_PMR_DME 0x00000010 /* Doze mode enable */ +#define SPR_PMR_SME 0x00000020 /* Sleep mode enable */ +#define SPR_PMR_DCGE 0x00000040 /* Dynamic clock gating enable */ +#define SPR_PMR_SUME 0x00000080 /* Suspend mode enable */ + +/* + * Bit definitions for PICMR + * + */ +#define SPR_PICMR_IUM 0xfffffffc /* Interrupt unmask */ + +/* + * Bit definitions for PICPR + * + */ +#define SPR_PICPR_IPRIO 0xfffffffc /* Interrupt priority */ + +/* + * Bit definitions for PICSR + * + */ +#define SPR_PICSR_IS 0xffffffff /* Interrupt status */ + +/* + * Bit definitions for Tick Timer Control Register + * + */ +#define SPR_TTCR_PERIOD 0x0fffffff /* Time Period */ +#define SPR_TTMR_PERIOD SPR_TTCR_PERIOD +#define SPR_TTMR_IP 0x10000000 /* Interrupt Pending */ +#define SPR_TTMR_IE 0x20000000 /* Interrupt Enable */ +#define SPR_TTMR_RT 0x40000000 /* Restart tick */ +#define SPR_TTMR_SR 0x80000000 /* Single run */ +#define SPR_TTMR_CR 0xc0000000 /* Continuous run */ +#define SPR_TTMR_M 0xc0000000 /* Tick mode */ + +/* + * l.nop constants + * + */ +#define NOP_NOP 0x0000 /* Normal nop instruction */ +#define NOP_EXIT 0x0001 /* End of simulation */ +#define NOP_REPORT 0x0002 /* Simple report */ +#define NOP_PRINTF 0x0003 /* Simprintf instruction */ +#define NOP_REPORT_FIRST 0x0400 /* Report with number */ +#define NOP_REPORT_LAST 0x03ff /* Report with number */ diff --git a/libc/sysdeps/linux/or1k/sys/procfs.h b/libc/sysdeps/linux/or1k/sys/procfs.h new file mode 100644 index 0000000..9d4c68f --- /dev/null +++ b/libc/sysdeps/linux/or1k/sys/procfs.h @@ -0,0 +1,116 @@ +/* Copyright (C) 1996, 1997, 1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _SYS_PROCFS_H +#define _SYS_PROCFS_H 1 + +/* This is somehow modelled after the file of the same name on SysVr4 + systems. It provides a definition of the core file format for ELF + used on Linux. */ + +#include <features.h> +#include <signal.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/ucontext.h> + +#include <asm/elf.h> + +__BEGIN_DECLS + +struct elf_siginfo + { + int si_signo; /* Signal number. */ + int si_code; /* Extra code. */ + int si_errno; /* Errno. */ + }; + + +/* Definitions to generate Intel SVR4-like core files. These mostly + have the same names as the SVR4 types with "elf_" tacked on the + front to prevent clashes with linux definitions, and the typedef + forms have been avoided. This is mostly like the SVR4 structure, + but more Linuxy, with things that Linux does not support and which + gdb doesn't really use excluded. Fields present but not used are + marked with "XXX". */ +struct elf_prstatus + { +#if 0 + long int pr_flags; /* XXX Process flags. */ + short int pr_why; /* XXX Reason for process halt. */ + short int pr_what; /* XXX More detailed reason. */ +#endif + struct elf_siginfo pr_info; /* Info associated with signal. */ + short int pr_cursig; /* Current signal. */ + unsigned long int pr_sigpend; /* Set of pending signals. */ + unsigned long int pr_sighold; /* Set of held signals. */ +#if 0 + struct sigaltstack pr_altstack; /* Alternate stack info. */ + struct sigaction pr_action; /* Signal action for current sig. */ +#endif + __pid_t pr_pid; + __pid_t pr_ppid; + __pid_t pr_pgrp; + __pid_t pr_sid; + struct timeval pr_utime; /* User time. */ + struct timeval pr_stime; /* System time. */ + struct timeval pr_cutime; /* Cumulative user time. */ + struct timeval pr_cstime; /* Cumulative system time. */ +#if 0 + long int pr_instr; /* Current instruction. */ +#endif + elf_gregset_t pr_reg; /* GP registers. */ + int pr_fpvalid; /* True if math copro being used. */ + }; + + +#define ELF_PRARGSZ (80) /* Number of chars for args */ + +struct elf_prpsinfo + { + char pr_state; /* Numeric process state. */ + char pr_sname; /* Char for pr_state. */ + char pr_zomb; /* Zombie. */ + char pr_nice; /* Nice val. */ + unsigned long int pr_flag; /* Flags. */ + __uid_t pr_uid; + __gid_t pr_gid; + __pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; + /* Lots missing */ + char pr_fname[16]; /* Filename of executable. */ + char pr_psargs[ELF_PRARGSZ]; /* Initial part of arg list. */ + }; + +/* Addresses. */ +typedef void *psaddr_t; + +/* Register sets. Linux has different names. */ +typedef elf_gregset_t prgregset_t; +typedef elf_fpregset_t prfpregset_t; + +/* We don't have any differences between processes and threads, + therefore habe only ine PID type. */ +typedef __pid_t lwpid_t; + + +typedef struct elf_prstatus prstatus_t; +typedef struct elf_prpsinfo prpsinfo_t; + +__END_DECLS + +#endif /* sys/procfs.h */ diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libc/sysdeps/linux/or1k/sys/ucontext.h similarity index 72% copy from libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S copy to libc/sysdeps/linux/or1k/sys/ucontext.h index 1e220a8..0d82cdb 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libc/sysdeps/linux/or1k/sys/ucontext.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Free Software Foundation, Inc. +/* Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -16,22 +16,11 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 +#ifndef _SYS_UCONTEXT_H +#define _SYS_UCONTEXT_H 1 - .globl pthread_spin_lock -pthread_spin_lock: +#include <features.h> +#include <signal.h> +#include <asm/ucontext.h> - entry a1, 16 - - movi a3, 0 - wsr a3, scompare1 - movi a3, 1 -1: s32c1i a3, a2, 0 - bnez a3, 1b - movi a2, 0 - - retw - - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +#endif /* sys/ucontext.h */ diff --git a/libc/sysdeps/linux/xtensa/__longjmp.S b/libc/sysdeps/linux/xtensa/__longjmp.S index 4d55906..acc0b4f 100644 --- a/libc/sysdeps/linux/xtensa/__longjmp.S +++ b/libc/sysdeps/linux/xtensa/__longjmp.S @@ -48,6 +48,7 @@ ENTRY (__longjmp) +#if defined(__XTENSA_WINDOWED_ABI__) /* Invalidate all but the current window. Reading and writing special registers WINDOWBASE and WINDOWSTART are privileged operations, so user processes must call the @@ -120,6 +121,22 @@ ENTRY (__longjmp) movnez a2, a3, a3 retw +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, a2, 0 + l32i a1, a2, 4 + l32i a12, a2, 8 + l32i a13, a2, 12 + l32i a14, a2, 16 + l32i a15, a2, 20 + + /* Return v ? v : 1. */ + movi a2, 1 + movnez a2, a3, a3 + + ret +#else +#error Unsupported Xtensa ABI +#endif END (__longjmp) libc_hidden_def (__longjmp) diff --git a/libc/sysdeps/linux/xtensa/bits/setjmp.h b/libc/sysdeps/linux/xtensa/bits/setjmp.h index 183fa3e..5d3e550 100644 --- a/libc/sysdeps/linux/xtensa/bits/setjmp.h +++ b/libc/sysdeps/linux/xtensa/bits/setjmp.h @@ -23,6 +23,7 @@ # error "Never include <bits/setjmp.h> directly; use <setjmp.h> instead." #endif +#if defined(__XTENSA_WINDOWED_ABI__) /* The jmp_buf structure for Xtensa holds the following (where "proc" is the procedure that calls setjmp): 4-12 registers from the window of proc, the 4 words from the save area at proc's $sp (in case a @@ -30,5 +31,13 @@ proc. Everything else is saved on the stack in the normal save areas. */ typedef int __jmp_buf[17]; +#elif defined(__XTENSA_CALL0_ABI__) +/* The jmp_buf structure for Xtensa Call0 ABI holds the return address, + the stack pointer and callee-saved registers (a12 - a15). */ + +typedef int __jmp_buf[6]; +#else +#error Unsupported Xtensa ABI +#endif #endif /* bits/setjmp.h */ diff --git a/libc/sysdeps/linux/xtensa/clone.S b/libc/sysdeps/linux/xtensa/clone.S index 34d68a8..88cd6c1 100644 --- a/libc/sysdeps/linux/xtensa/clone.S +++ b/libc/sysdeps/linux/xtensa/clone.S @@ -51,7 +51,7 @@ ENTRY (__clone) mov a8, a6 /* use a8 as a temp */ mov a6, a4 mov a4, a8 - l32i a8, a1, 16 /* child_tid */ + l32i a8, a1, FRAMESIZE /* child_tid */ movi a2, SYS_ify(clone) /* syscall(NR_clone,clone_flags, usp, parent_tid, child_tls, child_tid) @@ -65,7 +65,7 @@ ENTRY (__clone) /* fall through for parent */ .Lpseudo_end: - retw + abi_ret .Leinval: movi a2, -EINVAL @@ -94,17 +94,26 @@ ENTRY (__clone) /* start child thread */ movi a0, 0 /* terminate the stack frame */ + +#if defined(__XTENSA_WINDOWED_ABI__) mov a6, a9 /* load up the 'arg' parameter */ callx4 a7 /* call the user's function */ /* Call _exit. Note that any return parameter from the user's function in a6 is seen as inputs to _exit. */ -#ifdef PIC - movi a2, _exit@PLT + movi a2, JUMPTARGET(_exit) + callx4 a2 +#elif defined(__XTENSA_CALL0_ABI__) + mov a2, a9 /* load up the 'arg' parameter */ + callx0 a7 /* call the user's function */ + + /* Call _exit. Note that any return parameter from the user's + function in a2 is seen as inputs to _exit. */ + movi a0, JUMPTARGET(_exit) + callx0 a0 #else - movi a2, _exit +#error Unsupported Xtensa ABI #endif - callx4 a2 PSEUDO_END (__clone) diff --git a/libc/sysdeps/linux/xtensa/crt1.S b/libc/sysdeps/linux/xtensa/crt1.S index 025ebd0..efbe264 100644 --- a/libc/sysdeps/linux/xtensa/crt1.S +++ b/libc/sysdeps/linux/xtensa/crt1.S @@ -76,6 +76,7 @@ .global _start .type _start, @function _start: +#if defined(__XTENSA_WINDOWED_ABI__) /* Clear a0 to obviously mark the outermost frame. */ movi a0, 0 @@ -104,6 +105,35 @@ _start: But let the libc call main. */ movi a4, __uClibc_main callx4 a4 +#elif defined(__XTENSA_CALL0_ABI__) + /* Setup the shared library termination function. */ + mov a7, a2 + + /* Load up the user's main function. */ + movi a2, main + + /* Extract the arguments as encoded on the stack and set up + the arguments for `main': argc, argv. envp will be determined + later in __uClibc_main. */ + l32i a3, a1, 0 /* Load the argument count. */ + addi a4, a1, 4 /* Compute the argv pointer. */ + + /* Push address of our own entry points to .fini and .init. */ + movi a5, _init + movi a6, _fini + + /* Provide the highest stack address to the user code (for stacks + which grow downwards). Note that we destroy the stack version + of argc here. */ + s32i a1, a1, 0 + + /* Call the user's main function, and exit with its value. + But let the libc call main. */ + movi a0, __uClibc_main + callx0 a0 +#else +#error Unsupported Xtensa ABI +#endif /* Crash if somehow `exit' does return. */ ill diff --git a/libc/sysdeps/linux/xtensa/crti.S b/libc/sysdeps/linux/xtensa/crti.S index a01c02c..ba804eb 100644 --- a/libc/sysdeps/linux/xtensa/crti.S +++ b/libc/sysdeps/linux/xtensa/crti.S @@ -5,12 +5,25 @@ .global _init .type _init, @function _init: +#if defined(__XTENSA_WINDOWED_ABI__) entry sp, 48 - +#elif defined(__XTENSA_CALL0_ABI__) + addi sp, sp, -16 + s32i a0, sp, 0 +#else +#error Unsupported Xtensa ABI +#endif .section .fini .align 4 .global _fini .type _fini, @function _fini: +#if defined(__XTENSA_WINDOWED_ABI__) entry sp, 48 +#elif defined(__XTENSA_CALL0_ABI__) + addi sp, sp, -16 + s32i a0, sp, 0 +#else +#error Unsupported Xtensa ABI +#endif diff --git a/libc/sysdeps/linux/xtensa/crtn.S b/libc/sysdeps/linux/xtensa/crtn.S index ab1a489..a3598da 100644 --- a/libc/sysdeps/linux/xtensa/crtn.S +++ b/libc/sysdeps/linux/xtensa/crtn.S @@ -1,8 +1,23 @@ /* glibc's sysdeps/xtensa/elf/initfini.c used for reference [EPILOG] */ .section .init +#if defined(__XTENSA_WINDOWED_ABI__) retw - +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, sp, 0 + addi sp, sp, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif .section .fini +#if defined(__XTENSA_WINDOWED_ABI__) retw +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, sp, 0 + addi sp, sp, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif diff --git a/libc/sysdeps/linux/xtensa/mmap.S b/libc/sysdeps/linux/xtensa/mmap.S index c05036a..b4dd7c5 100644 --- a/libc/sysdeps/linux/xtensa/mmap.S +++ b/libc/sysdeps/linux/xtensa/mmap.S @@ -48,7 +48,7 @@ ENTRY (__mmap) bltz a2, SYSCALL_ERROR_LABEL .Lpseudo_end: - retw + abi_ret PSEUDO_END (__mmap) diff --git a/libc/sysdeps/linux/xtensa/setjmp.S b/libc/sysdeps/linux/xtensa/setjmp.S index bf46912..862bf67 100644 --- a/libc/sysdeps/linux/xtensa/setjmp.S +++ b/libc/sysdeps/linux/xtensa/setjmp.S @@ -88,6 +88,7 @@ END (setjmp) ENTRY (__sigsetjmp) 1: +#if defined(__XTENSA_WINDOWED_ABI__) /* Flush registers. */ movi a4, __window_spill callx4 a4 @@ -146,6 +147,22 @@ ENTRY (__sigsetjmp) callx4 a3 mov a2, a6 retw +#elif defined(__XTENSA_CALL0_ABI__) + s32i a0, a2, 0 + s32i a1, a2, 4 + s32i a12, a2, 8 + s32i a13, a2, 12 + s32i a14, a2, 16 + s32i a15, a2, 20 + mov a12, a2 + movi a0, __sigjmp_save + callx0 a0 + l32i a0, a12, 0 + l32i a12, a12, 8 + ret +#else +#error Unsupported Xtensa ABI +#endif END(__sigsetjmp) weak_extern(_setjmp) diff --git a/libc/sysdeps/linux/xtensa/syscall.S b/libc/sysdeps/linux/xtensa/syscall.S index 0e1a5d0..790a8d0 100644 --- a/libc/sysdeps/linux/xtensa/syscall.S +++ b/libc/sysdeps/linux/xtensa/syscall.S @@ -26,7 +26,7 @@ */ ENTRY (syscall) - l32i a9, a1, 16 /* load extra argument from stack */ + l32i a9, a1, FRAMESIZE/* load extra argument from stack */ mov a8, a7 mov a7, a3 /* preserve a3 in a7 */ mov a3, a4 @@ -37,5 +37,5 @@ ENTRY (syscall) movi a4, -4095 bgeu a2, a4, SYSCALL_ERROR_LABEL .Lpseudo_end: - retw + abi_ret PSEUDO_END (syscall) diff --git a/libc/sysdeps/linux/xtensa/sysdep.h b/libc/sysdeps/linux/xtensa/sysdep.h index 4873a41..ce2b0a0 100644 --- a/libc/sysdeps/linux/xtensa/sysdep.h +++ b/libc/sysdeps/linux/xtensa/sysdep.h @@ -28,13 +28,24 @@ #define ASM_TYPE_DIRECTIVE(name, typearg) .type name, typearg #define ASM_SIZE_DIRECTIVE(name) .size name, . - name +#if defined(__XTENSA_WINDOWED_ABI__) +#define abi_entry(reg, frame_size) entry reg, frame_size +#define abi_ret retw +#elif defined(__XTENSA_CALL0_ABI__) +#define abi_entry(reg, frame_size) +#define abi_ret ret +#else +#error Unsupported Xtensa ABI +#endif + + #define ENTRY(name) \ ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME(name); \ ASM_TYPE_DIRECTIVE (C_SYMBOL_NAME(name), @function); \ .align ALIGNARG(2); \ LITERAL_POSITION; \ C_LABEL(name) \ - entry sp, FRAMESIZE; \ + abi_entry(sp, FRAMESIZE); \ CALL_MCOUNT #define HIDDEN_ENTRY(name) \ @@ -44,7 +55,7 @@ .align ALIGNARG(2); \ LITERAL_POSITION; \ C_LABEL(name) \ - entry sp, FRAMESIZE; \ + abi_entry(sp, FRAMESIZE); \ CALL_MCOUNT #undef END @@ -73,7 +84,13 @@ #endif #ifndef FRAMESIZE +#if defined(__XTENSA_WINDOWED_ABI__) #define FRAMESIZE 16 +#elif defined(__XTENSA_CALL0_ABI__) +#define FRAMESIZE 0 +#else +#error Unsupported Xtensa ABI +#endif #endif #define CALL_MCOUNT /* Do nothing. */ @@ -118,7 +135,7 @@ END (name) #undef ret_NOERRNO -#define ret_NOERRNO retw +#define ret_NOERRNO abi_ret /* The function has to return the error code. */ #undef PSEUDO_ERRVAL @@ -133,7 +150,7 @@ END (name) #undef ret_ERRVAL -#define ret_ERRVAL retw +#define ret_ERRVAL abi_ret #if defined _LIBC_REENTRANT # if defined USE___THREAD @@ -151,6 +168,8 @@ movi a2, -1; \ j .Lpseudo_end; # else /* !USE___THREAD */ + +#if defined(__XTENSA_WINDOWED_ABI__) # define SYSCALL_ERROR_HANDLER \ 0: neg a2, a2; \ mov a6, a2; \ @@ -159,6 +178,24 @@ s32i a2, a6, 0; \ movi a2, -1; \ j .Lpseudo_end; +#elif defined(__XTENSA_CALL0_ABI__) +# define SYSCALL_ERROR_HANDLER \ +0: neg a2, a2; \ + addi a1, a1, -16; \ + s32i a0, a1, 0; \ + s32i a2, a1, 4; \ + movi a0, __errno_location@PLT; \ + callx0 a0; \ + l32i a0, a1, 0; \ + l32i a3, a1, 4; \ + addi a1, a1, 16; \ + s32i a3, a2, 0; \ + movi a2, -1; \ + j .Lpseudo_end; +#else +#error Unsupported Xtensa ABI +#endif + # endif /* !USE___THREAD */ #else /* !_LIBC_REENTRANT */ #define SYSCALL_ERROR_HANDLER \ diff --git a/libc/sysdeps/linux/xtensa/vfork.S b/libc/sysdeps/linux/xtensa/vfork.S index 6aced0a..b8db5c1 100644 --- a/libc/sysdeps/linux/xtensa/vfork.S +++ b/libc/sysdeps/linux/xtensa/vfork.S @@ -51,6 +51,8 @@ HIDDEN_ENTRY (__vfork) + +#if defined(__XTENSA_WINDOWED_ABI__) .literal .Ljumptable, 0, .L4, .L8, .L12 mov a3, a0 # move return address out of the way @@ -163,6 +165,27 @@ HIDDEN_ENTRY (__vfork) PSEUDO_END (__vfork) .Lpseudo_end: retw +#elif defined(__XTENSA_CALL0_ABI__) + SAVE_PID(a5, a8, a3, a4) + + /* Use syscall 'clone'. Set new stack pointer to the same address. */ + movi a2, SYS_ify (clone) + movi a3, 0 + movi a6, CLONE_VM | CLONE_VFORK | SIGCHLD + syscall + + RESTORE_PID(a5, a8, a2) + + movi a3, -4096 + bgeu a2, a3, 1f + ret +1: + PSEUDO_END (__vfork) +.Lpseudo_end: + ret +#else +#error Unsupported Xtensa ABI +#endif weak_alias (__vfork, vfork) libc_hidden_def(vfork) diff --git a/libc/sysdeps/linux/xtensa/windowspill.S b/libc/sysdeps/linux/xtensa/windowspill.S index 4167b28..0130256 100644 --- a/libc/sysdeps/linux/xtensa/windowspill.S +++ b/libc/sysdeps/linux/xtensa/windowspill.S @@ -18,6 +18,7 @@ #include <bits/xtensa-config.h> +#ifdef __XTENSA_WINDOWED_ABI__ .text .align 4 .literal_position @@ -93,3 +94,5 @@ __window_spill: #endif #endif retw + +#endif diff --git a/libpthread/linuxthreads/sysdeps/or1k/pt-machine.h b/libpthread/linuxthreads/sysdeps/or1k/pt-machine.h new file mode 100644 index 0000000..c6c8ee4 --- /dev/null +++ b/libpthread/linuxthreads/sysdeps/or1k/pt-machine.h @@ -0,0 +1,55 @@ +/* Machine-dependent pthreads configuration and inline functions. + OpenRISC version. + Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License as + published by the Free Software Foundation; either version 2.1 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +#ifndef _PT_MACHINE_H +#define _PT_MACHINE_H 1 + +#include <features.h> +#include <sys/syscall.h> + +#ifndef PT_EI +# define PT_EI __extern_always_inline +#endif + +PT_EI long int testandset(int*); + +#define OR1K_ATOMIC_XCHG 1 + +PT_EI long int +testandset (int *spinlock) +{ + int err; + int oldvalue = 1; + + err = INLINE_SYSCALL(or1k_atomic, 3, OR1K_ATOMIC_XCHG, spinlock, &oldvalue); + + return (oldvalue); +} + +/* Get some notion of the current stack. Need not be exactly the top + of the stack, just something somewhere in the current frame. */ +#define CURRENT_STACK_FRAME stack_pointer() +static inline char *stack_pointer(void) +{ + unsigned long ret; + __asm__ __volatile__ ("l.ori %0, r1, 0" : "=r" (ret)); + return (char *)ret; +} +#endif /* pt-machine.h */ diff --git a/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h b/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h index f82957d..02fe278 100644 --- a/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h +++ b/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h @@ -25,6 +25,7 @@ #if !defined NOT_IN_libc || defined IS_IN_libpthread || defined IS_IN_librt +#if defined(__XTENSA_WINDOWED_ABI__) /* CENABLE/CDISABLE in PSEUDO below use call8, stack frame size must be * at least 32. */ @@ -58,6 +59,64 @@ j SYSCALL_ERROR_LABEL; \ .Lpseudo_end: +# define CENABLE movi a8, CENABLE_FUNC; \ + callx8 a8 +# define CDISABLE movi a8, CDISABLE_FUNC; \ + callx8 a8 +#elif defined(__XTENSA_CALL0_ABI__) + +# undef PSEUDO +# define PSEUDO(name, syscall_name, args) \ + .text; \ + ENTRY (name) \ + SINGLE_THREAD_P(a10); \ + bnez a10, .Lpseudo_cancel; \ + DO_CALL (syscall_name, args); \ + bgez a2, .Lpseudo_done; \ + movi a4, -4095; \ + blt a2, a4, .Lpseudo_done; \ + j SYSCALL_ERROR_LABEL; \ + .Lpseudo_done: \ + ret; \ + .Lpseudo_cancel: \ + addi a1, a1, -32; \ + /* The syscall args are in a2...a7; save them */ \ + s32i a0, a1, 0; \ + s32i a2, a1, 4; \ + s32i a3, a1, 8; \ + s32i a4, a1, 12; \ + s32i a5, a1, 16; \ + s32i a6, a1, 20; \ + s32i a7, a1, 24; \ + CENABLE; \ + /* Move return value to a10 preserved across the syscall */ \ + mov a10, a2; \ + l32i a2, a1, 4; \ + l32i a3, a1, 8; \ + l32i a4, a1, 12; \ + l32i a5, a1, 16; \ + l32i a6, a1, 20; \ + l32i a7, a1, 24; \ + DO_CALL (syscall_name, args); \ + s32i a2, a1, 4; \ + mov a2, a10; \ + CDISABLE; \ + l32i a2, a1, 4; \ + l32i a0, a1, 0; \ + addi a1, a1, 32; \ + bgez a2, .Lpseudo_end; \ + movi a4, -4095; \ + blt a2, a4, .Lpseudo_end; \ + j SYSCALL_ERROR_LABEL; \ + .Lpseudo_end: + +# define CENABLE movi a0, CENABLE_FUNC; \ + callx0 a0 +# define CDISABLE movi a0, CDISABLE_FUNC; \ + callx0 a0 +#else +#error Unsupported Xtensa ABI +#endif # ifdef IS_IN_libpthread # define CENABLE_FUNC __pthread_enable_asynccancel @@ -74,11 +133,6 @@ # error Unsupported library # endif -# define CENABLE movi a8, CENABLE_FUNC; \ - callx8 a8 -# define CDISABLE movi a8, CDISABLE_FUNC; \ - callx8 a8 - # if defined IS_IN_libpthread || !defined NOT_IN_libc # ifndef __ASSEMBLER__ extern int __local_multiple_threads attribute_hidden; diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S index 1e220a8..10b1c00 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S @@ -16,13 +16,10 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 - - .globl pthread_spin_lock -pthread_spin_lock: +#include <sysdep.h> - entry a1, 16 + .text +ENTRY (pthread_spin_lock) movi a3, 0 wsr a3, scompare1 @@ -31,7 +28,6 @@ pthread_spin_lock: bnez a3, 1b movi a2, 0 - retw + abi_ret - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +END (pthread_spin_lock) diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S b/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S index a736b01..4742bdb 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S +++ b/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S @@ -18,14 +18,10 @@ #define _ERRNO_H 1 #include <bits/errno.h> +#include <sysdep.h> .text - .align 4 - - .globl pthread_spin_trylock -pthread_spin_trylock: - - entry a1, 16 +ENTRY (pthread_spin_trylock) movi a3, 0 wsr a3, scompare1 @@ -34,7 +30,6 @@ pthread_spin_trylock: movi a2, EBUSY moveqz a2, a3, a3 - retw + abi_ret - .type pthread_spin_trylock, @function - .size pthread_spin_trylock, .-pthread_spin_trylock +END (pthread_spin_trylock) diff --git a/test/tls/tls-macros.h b/test/tls/tls-macros.h index 7d89274..315f0e2 100644 --- a/test/tls/tls-macros.h +++ b/test/tls/tls-macros.h @@ -887,6 +887,7 @@ register void *__gp __asm__("$29"); #elif defined __xtensa__ +#if defined(__XTENSA_WINDOWED_ABI__) #define TLS_GD(x) \ ({ int *__l; \ __asm__ ("movi a8, " #x "@TLSFUNC\n\t" \ @@ -909,6 +910,32 @@ register void *__gp __asm__("$29"); : \ : "a8", "a9", "a10", "a11", "a12", "a13", "a14", "a15"); \ __l; }) +#elif defined(__XTENSA_CALL0_ABI__) +#define TLS_GD(x) \ + ({ int *__l; \ + __asm__ ("movi a0, " #x "@TLSFUNC\n\t" \ + "movi a2, " #x "@TLSARG\n\t" \ + "callx0.tls a0, " #x "@TLSCALL\n\t" \ + "mov %0, a2\n\t" \ + : "=r" (__l) \ + : \ + : "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "a10", "a11");\ + __l; }) + +#define TLS_LD(x) \ + ({ int *__l; \ + __asm__ ("movi a0, _TLS_MODULE_BASE_@TLSFUNC\n\t" \ + "movi a2, _TLS_MODULE_BASE_@TLSARG\n\t" \ + "callx0.tls a0, _TLS_MODULE_BASE_@TLSCALL\n\t" \ + "movi %0, " #x "@TPOFF\n\t" \ + "add %0, %0, a2\n\t" \ + : "=r" (__l) \ + : \ + : "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "a10", "a11");\ + __l; }) +#else +#error Unsupported Xtensa ABI +#endif #define TLS_IE(x) TLS_LE(x) hooks/post-receive -- uClibc-ng - small C library for embedded systems

9 years, 5 months

uClibc-ng - small C library for embedded systems branch 1.0 updated. v1.0.6-8-ge78a0f5

by wbx＠helium.waldemar-brodkorb.de

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "uClibc-ng - small C library for embedded systems". The branch, 1.0 has been updated via e78a0f58f23347c822c182d1c01f6eb9b9866d60 (commit) from 9fae2ad9937279c9f7f40975ac14cb7b57f4a36d (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit e78a0f58f23347c822c182d1c01f6eb9b9866d60 Author: Max Filippov <jcmvbkbc(a)gmail.com> Date: Wed Sep 16 01:49:49 2015 +0300 xtensa: support call0 ABI Most changes are mechanical replacement of 'retw' instruction with 'abi_ret' macro, defined to 'retw' or 'ret' according to ABI. Assembly code that makes calls is duplicated for call0 ABI with changed register numbers for parameters/return value and call instruction. 'entry' instructions are replaced with 'abi_entry' macro. More interesting changes: - non-leaf assembly functions (e.g. _dl_tlsdesc_dynamic, _dl_linux_resolve, SYSCALL_ERROR_HANDLER, PSEUDO) now need to preserve registers around intermediate calls they make, use temporary stack frame for that; - setjmp/longjmp only need to save and restore return address, stack pointer and callee-saved registers in the jmpbuf; - __clone and syscall functions had hardcoded offsets to parameter passed on stack, on call0 ABI they don't need stack frame, so the offset is different. Replace these offsets with FRAMESIZE macro. Signed-off-by: Max Filippov <jcmvbkbc(a)gmail.com> ----------------------------------------------------------------------- Summary of changes: ldso/ldso/xtensa/dl-startup.h | 12 ++++ ldso/ldso/xtensa/dl-tlsdesc.S | 45 ++++++++------ ldso/ldso/xtensa/resolve.S | 35 +++++++++++ libc/string/xtensa/memcpy.S | 16 ++--- libc/string/xtensa/memset.S | 4 +- libc/string/xtensa/strcmp.S | 20 +++--- libc/string/xtensa/strcpy.S | 12 ++-- libc/string/xtensa/strlen.S | 8 +-- libc/string/xtensa/strncpy.S | 6 +- libc/sysdeps/linux/xtensa/__longjmp.S | 17 ++++++ libc/sysdeps/linux/xtensa/bits/setjmp.h | 9 +++ libc/sysdeps/linux/xtensa/clone.S | 21 +++++-- libc/sysdeps/linux/xtensa/crt1.S | 30 +++++++++ libc/sysdeps/linux/xtensa/crti.S | 15 ++++- libc/sysdeps/linux/xtensa/crtn.S | 17 +++++- libc/sysdeps/linux/xtensa/mmap.S | 2 +- libc/sysdeps/linux/xtensa/setjmp.S | 17 ++++++ libc/sysdeps/linux/xtensa/syscall.S | 4 +- libc/sysdeps/linux/xtensa/sysdep.h | 45 ++++++++++++-- libc/sysdeps/linux/xtensa/vfork.S | 23 +++++++ libc/sysdeps/linux/xtensa/windowspill.S | 3 + .../sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h | 64 ++++++++++++++++++-- libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S | 14 ++--- .../nptl/sysdeps/xtensa/pthread_spin_trylock.S | 13 ++-- test/tls/tls-macros.h | 27 +++++++++ 25 files changed, 388 insertions(+), 91 deletions(-) diff --git a/ldso/ldso/xtensa/dl-startup.h b/ldso/ldso/xtensa/dl-startup.h index 8fe54a3..aece0cd 100644 --- a/ldso/ldso/xtensa/dl-startup.h +++ b/ldso/ldso/xtensa/dl-startup.h @@ -23,6 +23,7 @@ __asm__ ( " .align 4\n" "0: movi a3, _start+3\n" " sub a2, a0, a3\n" +#if defined(__XTENSA_WINDOWED_ABI__) " # Make sure a0 is cleared to mark the top of stack.\n" " movi a0, 0\n" " # user_entry_point = _dl_start(pointer to argument block)\n" @@ -32,6 +33,17 @@ __asm__ ( " callx4 a4\n" " # Save user_entry_point so we can jump to it.\n" " mov a3, a6\n" +#elif defined(__XTENSA_CALL0_ABI__) + " # user_entry_point = _dl_start(pointer to argument block)\n" + " movi a0, _dl_start\n" + " add a0, a0, a2\n" + " mov a2, sp\n" + " callx0 a0\n" + " # Save user_entry_point so we can jump to it.\n" + " mov a3, a2\n" +#else +#error Unsupported Xtensa ABI +#endif " l32i a7, sp, 0 # load argc\n" " # Load _dl_skip_args into a4.\n" " movi a4, _dl_skip_args\n" diff --git a/ldso/ldso/xtensa/dl-tlsdesc.S b/ldso/ldso/xtensa/dl-tlsdesc.S index 0638af4..6f417f6 100644 --- a/ldso/ldso/xtensa/dl-tlsdesc.S +++ b/ldso/ldso/xtensa/dl-tlsdesc.S @@ -23,16 +23,11 @@ #include "tlsdesc.h" .text - .align 4 - .hidden _dl_tlsdesc_return - .global _dl_tlsdesc_return - .type _dl_tlsdesc_return, @function -_dl_tlsdesc_return: - entry a1, 16 +HIDDEN_ENTRY (_dl_tlsdesc_return) rur.threadptr a3 add a2, a2, a3 - retw - .size _dl_tlsdesc_return, .-_dl_tlsdesc_return + abi_ret +END (_dl_tlsdesc_return) #ifdef SHARED @@ -57,12 +52,7 @@ _dl_tlsdesc_return: } */ - .align 4 - .hidden _dl_tlsdesc_dynamic - .global _dl_tlsdesc_dynamic - .type _dl_tlsdesc_dynamic, @function -_dl_tlsdesc_dynamic: - entry a1, 32 +HIDDEN_ENTRY (_dl_tlsdesc_dynamic) /* dtv_t *dtv = (dtv_t *)THREAD_DTV(); */ rur.threadptr a3 @@ -83,16 +73,31 @@ _dl_tlsdesc_dynamic: + td->tlsinfo.ti_offset - __builtin_thread_pointer(); */ l32i a6, a2, TLSDESC_MODOFF sub a2, a6, a3 - retw + abi_ret /* return __tls_get_addr (&td->tlsinfo) - __builtin_thread_pointer(); */ .Lslow: - mov a10, a2 - movi a8, __tls_get_addr - callx8 a8 - sub a2, a10, a3 +#if defined(__XTENSA_WINDOWED_ABI__) + mov a6, a2 + movi a4, __tls_get_addr + callx4 a4 + sub a2, a6, a3 retw - .size _dl_tlsdesc_dynamic, .-_dl_tlsdesc_dynamic +#elif defined(__XTENSA_CALL0_ABI__) + addi a1, a1, -16 + s32i a0, a1, 0 + s32i a3, a1, 4 + movi a0, __tls_get_addr + callx0 a0 + l32i a3, a1, 4 + l32i a0, a1, 0 + sub a2, a2, a3 + addi a1, a1, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif +END (_dl_tlsdesc_dynamic) #endif /* SHARED */ #endif diff --git a/ldso/ldso/xtensa/resolve.S b/ldso/ldso/xtensa/resolve.S index 8061af2..12a554d 100644 --- a/ldso/ldso/xtensa/resolve.S +++ b/ldso/ldso/xtensa/resolve.S @@ -31,6 +31,7 @@ .global _dl_linux_resolve .type _dl_linux_resolve, @function _dl_linux_resolve: +#if defined(__XTENSA_WINDOWED_ABI__) /* Call the fixup function. */ movi a8, _dl_linux_resolver callx8 a8 @@ -47,4 +48,38 @@ _dl_linux_resolve: /* Jump to the next instruction past the ENTRY. */ addi a10, a10, 3 jx a10 +#elif defined(__XTENSA_CALL0_ABI__) + /* Reserve stack space and save incoming arguments. */ + addi a1, a1, -32 + s32i a0, a1, 0 + s32i a2, a1, 8 + s32i a3, a1, 12 + s32i a4, a1, 16 + s32i a5, a1, 20 + s32i a6, a1, 24 + s32i a7, a1, 28 + + /* Move arguments for the _dl_linux_resolver to proper registers. */ + mov a2, a10 + mov a3, a11 + /* Call the fixup function. */ + movi a0, _dl_linux_resolver + callx0 a0 + mov a10, a2 + + /* Restore incoming arguments from stack and deallocate reservation. */ + l32i a0, a1, 0 + l32i a2, a1, 8 + l32i a3, a1, 12 + l32i a4, a1, 16 + l32i a5, a1, 20 + l32i a6, a1, 24 + l32i a7, a1, 28 + addi a1, a1, 32 + + /* Jump to the target function. */ + jx a10 +#else +#error Unsupported Xtensa ABI +#endif .size _dl_linux_resolve, . - _dl_linux_resolve diff --git a/libc/string/xtensa/memcpy.S b/libc/string/xtensa/memcpy.S index 2b23b41..2442056 100644 --- a/libc/string/xtensa/memcpy.S +++ b/libc/string/xtensa/memcpy.S @@ -91,7 +91,7 @@ __memcpy_aux: #if !XCHAL_HAVE_LOOPS blt a3, a7, 1b #endif -2: retw +2: abi_ret /* Destination is unaligned. */ @@ -181,7 +181,7 @@ ENTRY (memcpy) 3: bbsi.l a4, 2, 4f bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 4 bytes. */ 4: l32i a6, a3, 0 @@ -190,7 +190,7 @@ ENTRY (memcpy) addi a5, a5, 4 bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 2 bytes. */ 5: l16ui a6, a3, 0 @@ -198,14 +198,14 @@ ENTRY (memcpy) s16i a6, a5, 0 addi a5, a5, 2 bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 1 byte. */ 6: l8ui a6, a3, 0 s8i a6, a5, 0 .Ldone: - retw + abi_ret /* Destination is aligned; source is unaligned. */ @@ -276,7 +276,7 @@ ENTRY (memcpy) #endif bbsi.l a4, 1, 5f bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 2 bytes. */ 5: l8ui a6, a3, 0 @@ -286,11 +286,11 @@ ENTRY (memcpy) s8i a7, a5, 1 addi a5, a5, 2 bbsi.l a4, 0, 6f - retw + abi_ret /* Copy 1 byte. */ 6: l8ui a6, a3, 0 s8i a6, a5, 0 - retw + abi_ret libc_hidden_def (memcpy) diff --git a/libc/string/xtensa/memset.S b/libc/string/xtensa/memset.S index 435d6de..20bf14c 100644 --- a/libc/string/xtensa/memset.S +++ b/libc/string/xtensa/memset.S @@ -63,7 +63,7 @@ __memset_aux: #if !XCHAL_HAVE_LOOPS blt a5, a6, 1b #endif -2: retw +2: abi_ret /* Destination is unaligned. */ @@ -159,6 +159,6 @@ ENTRY (memset) /* Set 1 byte. */ s8i a3, a5, 0 -6: retw +6: abi_ret libc_hidden_def (memset) diff --git a/libc/string/xtensa/strcmp.S b/libc/string/xtensa/strcmp.S index 8ed1ed0..2dce590 100644 --- a/libc/string/xtensa/strcmp.S +++ b/libc/string/xtensa/strcmp.S @@ -108,7 +108,7 @@ ENTRY (strcmp) #endif .Lretdiff: sub a2, a8, a9 - retw + abi_ret /* s1 is word-aligned; s2 is word-aligned. @@ -229,7 +229,7 @@ ENTRY (strcmp) /* Words are equal; some byte is zero. */ .Leq: movi a2, 0 /* return equal */ - retw + abi_ret .Lwne2: /* Words are not equal. On big-endian processors, if none of the bytes are zero, the return value can be determined by a simple @@ -239,10 +239,10 @@ ENTRY (strcmp) bnall a10, a7, .Lsomezero bgeu a8, a9, .Lposreturn movi a2, -1 - retw + abi_ret .Lposreturn: movi a2, 1 - retw + abi_ret .Lsomezero: /* There is probably some zero byte. */ #endif /* __XTENSA_EB__ */ .Lwne: /* Words are not equal. */ @@ -263,14 +263,14 @@ ENTRY (strcmp) byte. Just subtract words to get the return value. The high order equal bytes cancel, leaving room for the sign. */ sub a2, a8, a9 - retw + abi_ret .Ldiff0: /* Need to make room for the sign, so can't subtract whole words. */ extui a10, a8, 24, 8 extui a11, a9, 24, 8 sub a2, a10, a11 - retw + abi_ret #else /* !__XTENSA_EB__ */ /* Little-endian is a little more difficult because can't subtract @@ -281,28 +281,28 @@ ENTRY (strcmp) extui a10, a8, 24, 8 extui a11, a9, 24, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff0: /* Byte 0 is different. */ extui a10, a8, 0, 8 extui a11, a9, 0, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff1: /* Byte 0 is equal; byte 1 is different. */ extui a10, a8, 8, 8 extui a11, a9, 8, 8 sub a2, a10, a11 - retw + abi_ret .Ldiff2: /* Bytes 0-1 are equal; byte 2 is different. */ extui a10, a8, 16, 8 extui a11, a9, 16, 8 sub a2, a10, a11 - retw + abi_ret #endif /* !__XTENSA_EB */ diff --git a/libc/string/xtensa/strcpy.S b/libc/string/xtensa/strcpy.S index f9f5868..9f42b34 100644 --- a/libc/string/xtensa/strcpy.S +++ b/libc/string/xtensa/strcpy.S @@ -68,7 +68,7 @@ ENTRY (strcpy) s8i a8, a10, 1 /* store byte 0 */ addi a10, a10, 2 /* advance dst pointer */ bnez a8, .Lsrcaligned -1: retw +1: abi_ret /* dst is word-aligned; src is word-aligned. */ @@ -102,21 +102,21 @@ ENTRY (strcpy) #endif /* !XCHAL_HAVE_LOOPS */ .Lz3: /* Byte 3 is zero. */ - retw + abi_ret .Lz0: /* Byte 0 is zero. */ #ifdef __XTENSA_EB__ movi a8, 0 #endif s8i a8, a10, 0 - retw + abi_ret .Lz1: /* Byte 1 is zero. */ #ifdef __XTENSA_EB__ extui a8, a8, 16, 16 #endif s16i a8, a10, 0 - retw + abi_ret .Lz2: /* Byte 2 is zero. */ #ifdef __XTENSA_EB__ @@ -125,7 +125,7 @@ ENTRY (strcpy) s16i a8, a10, 0 movi a8, 0 s8i a8, a10, 2 - retw + abi_ret .align 4 /* (2 mod 4) alignment for loop instruction */ @@ -144,6 +144,6 @@ ENTRY (strcpy) #else bnez a8, 1b #endif -2: retw +2: abi_ret libc_hidden_def (strcpy) diff --git a/libc/string/xtensa/strlen.S b/libc/string/xtensa/strlen.S index 86fe113..e1c98c8 100644 --- a/libc/string/xtensa/strlen.S +++ b/libc/string/xtensa/strlen.S @@ -59,7 +59,7 @@ ENTRY (strlen) /* Byte 3 is zero. */ addi a3, a3, 3 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret /* String is word-aligned. */ @@ -88,16 +88,16 @@ ENTRY (strlen) .Lz0: /* Byte 0 is zero. */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret .Lz1: /* Byte 1 is zero. */ addi a3, a3, 1 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret .Lz2: /* Byte 2 is zero. */ addi a3, a3, 2 /* point to zero byte */ sub a2, a3, a2 /* subtract to get length */ - retw + abi_ret libc_hidden_def (strlen) diff --git a/libc/string/xtensa/strncpy.S b/libc/string/xtensa/strncpy.S index 115d44c..aa8db5d 100644 --- a/libc/string/xtensa/strncpy.S +++ b/libc/string/xtensa/strncpy.S @@ -67,7 +67,7 @@ __strncpy_aux: j .Lfill .Lret: - retw + abi_ret ENTRY (strncpy) @@ -129,7 +129,7 @@ ENTRY (strncpy) addi a10, a10, 1 bnez a4, .Lfillcleanup -2: retw +2: abi_ret .Lfill1mod2: /* dst address is odd */ s8i a9, a10, 0 /* store byte 0 */ @@ -235,6 +235,6 @@ ENTRY (strncpy) #endif 2: j .Lfill -3: retw +3: abi_ret libc_hidden_def (strncpy) diff --git a/libc/sysdeps/linux/xtensa/__longjmp.S b/libc/sysdeps/linux/xtensa/__longjmp.S index 4d55906..acc0b4f 100644 --- a/libc/sysdeps/linux/xtensa/__longjmp.S +++ b/libc/sysdeps/linux/xtensa/__longjmp.S @@ -48,6 +48,7 @@ ENTRY (__longjmp) +#if defined(__XTENSA_WINDOWED_ABI__) /* Invalidate all but the current window. Reading and writing special registers WINDOWBASE and WINDOWSTART are privileged operations, so user processes must call the @@ -120,6 +121,22 @@ ENTRY (__longjmp) movnez a2, a3, a3 retw +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, a2, 0 + l32i a1, a2, 4 + l32i a12, a2, 8 + l32i a13, a2, 12 + l32i a14, a2, 16 + l32i a15, a2, 20 + + /* Return v ? v : 1. */ + movi a2, 1 + movnez a2, a3, a3 + + ret +#else +#error Unsupported Xtensa ABI +#endif END (__longjmp) libc_hidden_def (__longjmp) diff --git a/libc/sysdeps/linux/xtensa/bits/setjmp.h b/libc/sysdeps/linux/xtensa/bits/setjmp.h index 183fa3e..5d3e550 100644 --- a/libc/sysdeps/linux/xtensa/bits/setjmp.h +++ b/libc/sysdeps/linux/xtensa/bits/setjmp.h @@ -23,6 +23,7 @@ # error "Never include <bits/setjmp.h> directly; use <setjmp.h> instead." #endif +#if defined(__XTENSA_WINDOWED_ABI__) /* The jmp_buf structure for Xtensa holds the following (where "proc" is the procedure that calls setjmp): 4-12 registers from the window of proc, the 4 words from the save area at proc's $sp (in case a @@ -30,5 +31,13 @@ proc. Everything else is saved on the stack in the normal save areas. */ typedef int __jmp_buf[17]; +#elif defined(__XTENSA_CALL0_ABI__) +/* The jmp_buf structure for Xtensa Call0 ABI holds the return address, + the stack pointer and callee-saved registers (a12 - a15). */ + +typedef int __jmp_buf[6]; +#else +#error Unsupported Xtensa ABI +#endif #endif /* bits/setjmp.h */ diff --git a/libc/sysdeps/linux/xtensa/clone.S b/libc/sysdeps/linux/xtensa/clone.S index 34d68a8..88cd6c1 100644 --- a/libc/sysdeps/linux/xtensa/clone.S +++ b/libc/sysdeps/linux/xtensa/clone.S @@ -51,7 +51,7 @@ ENTRY (__clone) mov a8, a6 /* use a8 as a temp */ mov a6, a4 mov a4, a8 - l32i a8, a1, 16 /* child_tid */ + l32i a8, a1, FRAMESIZE /* child_tid */ movi a2, SYS_ify(clone) /* syscall(NR_clone,clone_flags, usp, parent_tid, child_tls, child_tid) @@ -65,7 +65,7 @@ ENTRY (__clone) /* fall through for parent */ .Lpseudo_end: - retw + abi_ret .Leinval: movi a2, -EINVAL @@ -94,17 +94,26 @@ ENTRY (__clone) /* start child thread */ movi a0, 0 /* terminate the stack frame */ + +#if defined(__XTENSA_WINDOWED_ABI__) mov a6, a9 /* load up the 'arg' parameter */ callx4 a7 /* call the user's function */ /* Call _exit. Note that any return parameter from the user's function in a6 is seen as inputs to _exit. */ -#ifdef PIC - movi a2, _exit@PLT + movi a2, JUMPTARGET(_exit) + callx4 a2 +#elif defined(__XTENSA_CALL0_ABI__) + mov a2, a9 /* load up the 'arg' parameter */ + callx0 a7 /* call the user's function */ + + /* Call _exit. Note that any return parameter from the user's + function in a2 is seen as inputs to _exit. */ + movi a0, JUMPTARGET(_exit) + callx0 a0 #else - movi a2, _exit +#error Unsupported Xtensa ABI #endif - callx4 a2 PSEUDO_END (__clone) diff --git a/libc/sysdeps/linux/xtensa/crt1.S b/libc/sysdeps/linux/xtensa/crt1.S index 025ebd0..efbe264 100644 --- a/libc/sysdeps/linux/xtensa/crt1.S +++ b/libc/sysdeps/linux/xtensa/crt1.S @@ -76,6 +76,7 @@ .global _start .type _start, @function _start: +#if defined(__XTENSA_WINDOWED_ABI__) /* Clear a0 to obviously mark the outermost frame. */ movi a0, 0 @@ -104,6 +105,35 @@ _start: But let the libc call main. */ movi a4, __uClibc_main callx4 a4 +#elif defined(__XTENSA_CALL0_ABI__) + /* Setup the shared library termination function. */ + mov a7, a2 + + /* Load up the user's main function. */ + movi a2, main + + /* Extract the arguments as encoded on the stack and set up + the arguments for `main': argc, argv. envp will be determined + later in __uClibc_main. */ + l32i a3, a1, 0 /* Load the argument count. */ + addi a4, a1, 4 /* Compute the argv pointer. */ + + /* Push address of our own entry points to .fini and .init. */ + movi a5, _init + movi a6, _fini + + /* Provide the highest stack address to the user code (for stacks + which grow downwards). Note that we destroy the stack version + of argc here. */ + s32i a1, a1, 0 + + /* Call the user's main function, and exit with its value. + But let the libc call main. */ + movi a0, __uClibc_main + callx0 a0 +#else +#error Unsupported Xtensa ABI +#endif /* Crash if somehow `exit' does return. */ ill diff --git a/libc/sysdeps/linux/xtensa/crti.S b/libc/sysdeps/linux/xtensa/crti.S index a01c02c..ba804eb 100644 --- a/libc/sysdeps/linux/xtensa/crti.S +++ b/libc/sysdeps/linux/xtensa/crti.S @@ -5,12 +5,25 @@ .global _init .type _init, @function _init: +#if defined(__XTENSA_WINDOWED_ABI__) entry sp, 48 - +#elif defined(__XTENSA_CALL0_ABI__) + addi sp, sp, -16 + s32i a0, sp, 0 +#else +#error Unsupported Xtensa ABI +#endif .section .fini .align 4 .global _fini .type _fini, @function _fini: +#if defined(__XTENSA_WINDOWED_ABI__) entry sp, 48 +#elif defined(__XTENSA_CALL0_ABI__) + addi sp, sp, -16 + s32i a0, sp, 0 +#else +#error Unsupported Xtensa ABI +#endif diff --git a/libc/sysdeps/linux/xtensa/crtn.S b/libc/sysdeps/linux/xtensa/crtn.S index ab1a489..a3598da 100644 --- a/libc/sysdeps/linux/xtensa/crtn.S +++ b/libc/sysdeps/linux/xtensa/crtn.S @@ -1,8 +1,23 @@ /* glibc's sysdeps/xtensa/elf/initfini.c used for reference [EPILOG] */ .section .init +#if defined(__XTENSA_WINDOWED_ABI__) retw - +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, sp, 0 + addi sp, sp, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif .section .fini +#if defined(__XTENSA_WINDOWED_ABI__) retw +#elif defined(__XTENSA_CALL0_ABI__) + l32i a0, sp, 0 + addi sp, sp, 16 + ret +#else +#error Unsupported Xtensa ABI +#endif diff --git a/libc/sysdeps/linux/xtensa/mmap.S b/libc/sysdeps/linux/xtensa/mmap.S index c05036a..b4dd7c5 100644 --- a/libc/sysdeps/linux/xtensa/mmap.S +++ b/libc/sysdeps/linux/xtensa/mmap.S @@ -48,7 +48,7 @@ ENTRY (__mmap) bltz a2, SYSCALL_ERROR_LABEL .Lpseudo_end: - retw + abi_ret PSEUDO_END (__mmap) diff --git a/libc/sysdeps/linux/xtensa/setjmp.S b/libc/sysdeps/linux/xtensa/setjmp.S index bf46912..862bf67 100644 --- a/libc/sysdeps/linux/xtensa/setjmp.S +++ b/libc/sysdeps/linux/xtensa/setjmp.S @@ -88,6 +88,7 @@ END (setjmp) ENTRY (__sigsetjmp) 1: +#if defined(__XTENSA_WINDOWED_ABI__) /* Flush registers. */ movi a4, __window_spill callx4 a4 @@ -146,6 +147,22 @@ ENTRY (__sigsetjmp) callx4 a3 mov a2, a6 retw +#elif defined(__XTENSA_CALL0_ABI__) + s32i a0, a2, 0 + s32i a1, a2, 4 + s32i a12, a2, 8 + s32i a13, a2, 12 + s32i a14, a2, 16 + s32i a15, a2, 20 + mov a12, a2 + movi a0, __sigjmp_save + callx0 a0 + l32i a0, a12, 0 + l32i a12, a12, 8 + ret +#else +#error Unsupported Xtensa ABI +#endif END(__sigsetjmp) weak_extern(_setjmp) diff --git a/libc/sysdeps/linux/xtensa/syscall.S b/libc/sysdeps/linux/xtensa/syscall.S index 0e1a5d0..790a8d0 100644 --- a/libc/sysdeps/linux/xtensa/syscall.S +++ b/libc/sysdeps/linux/xtensa/syscall.S @@ -26,7 +26,7 @@ */ ENTRY (syscall) - l32i a9, a1, 16 /* load extra argument from stack */ + l32i a9, a1, FRAMESIZE/* load extra argument from stack */ mov a8, a7 mov a7, a3 /* preserve a3 in a7 */ mov a3, a4 @@ -37,5 +37,5 @@ ENTRY (syscall) movi a4, -4095 bgeu a2, a4, SYSCALL_ERROR_LABEL .Lpseudo_end: - retw + abi_ret PSEUDO_END (syscall) diff --git a/libc/sysdeps/linux/xtensa/sysdep.h b/libc/sysdeps/linux/xtensa/sysdep.h index 4873a41..ce2b0a0 100644 --- a/libc/sysdeps/linux/xtensa/sysdep.h +++ b/libc/sysdeps/linux/xtensa/sysdep.h @@ -28,13 +28,24 @@ #define ASM_TYPE_DIRECTIVE(name, typearg) .type name, typearg #define ASM_SIZE_DIRECTIVE(name) .size name, . - name +#if defined(__XTENSA_WINDOWED_ABI__) +#define abi_entry(reg, frame_size) entry reg, frame_size +#define abi_ret retw +#elif defined(__XTENSA_CALL0_ABI__) +#define abi_entry(reg, frame_size) +#define abi_ret ret +#else +#error Unsupported Xtensa ABI +#endif + + #define ENTRY(name) \ ASM_GLOBAL_DIRECTIVE C_SYMBOL_NAME(name); \ ASM_TYPE_DIRECTIVE (C_SYMBOL_NAME(name), @function); \ .align ALIGNARG(2); \ LITERAL_POSITION; \ C_LABEL(name) \ - entry sp, FRAMESIZE; \ + abi_entry(sp, FRAMESIZE); \ CALL_MCOUNT #define HIDDEN_ENTRY(name) \ @@ -44,7 +55,7 @@ .align ALIGNARG(2); \ LITERAL_POSITION; \ C_LABEL(name) \ - entry sp, FRAMESIZE; \ + abi_entry(sp, FRAMESIZE); \ CALL_MCOUNT #undef END @@ -73,7 +84,13 @@ #endif #ifndef FRAMESIZE +#if defined(__XTENSA_WINDOWED_ABI__) #define FRAMESIZE 16 +#elif defined(__XTENSA_CALL0_ABI__) +#define FRAMESIZE 0 +#else +#error Unsupported Xtensa ABI +#endif #endif #define CALL_MCOUNT /* Do nothing. */ @@ -118,7 +135,7 @@ END (name) #undef ret_NOERRNO -#define ret_NOERRNO retw +#define ret_NOERRNO abi_ret /* The function has to return the error code. */ #undef PSEUDO_ERRVAL @@ -133,7 +150,7 @@ END (name) #undef ret_ERRVAL -#define ret_ERRVAL retw +#define ret_ERRVAL abi_ret #if defined _LIBC_REENTRANT # if defined USE___THREAD @@ -151,6 +168,8 @@ movi a2, -1; \ j .Lpseudo_end; # else /* !USE___THREAD */ + +#if defined(__XTENSA_WINDOWED_ABI__) # define SYSCALL_ERROR_HANDLER \ 0: neg a2, a2; \ mov a6, a2; \ @@ -159,6 +178,24 @@ s32i a2, a6, 0; \ movi a2, -1; \ j .Lpseudo_end; +#elif defined(__XTENSA_CALL0_ABI__) +# define SYSCALL_ERROR_HANDLER \ +0: neg a2, a2; \ + addi a1, a1, -16; \ + s32i a0, a1, 0; \ + s32i a2, a1, 4; \ + movi a0, __errno_location@PLT; \ + callx0 a0; \ + l32i a0, a1, 0; \ + l32i a3, a1, 4; \ + addi a1, a1, 16; \ + s32i a3, a2, 0; \ + movi a2, -1; \ + j .Lpseudo_end; +#else +#error Unsupported Xtensa ABI +#endif + # endif /* !USE___THREAD */ #else /* !_LIBC_REENTRANT */ #define SYSCALL_ERROR_HANDLER \ diff --git a/libc/sysdeps/linux/xtensa/vfork.S b/libc/sysdeps/linux/xtensa/vfork.S index 6aced0a..b8db5c1 100644 --- a/libc/sysdeps/linux/xtensa/vfork.S +++ b/libc/sysdeps/linux/xtensa/vfork.S @@ -51,6 +51,8 @@ HIDDEN_ENTRY (__vfork) + +#if defined(__XTENSA_WINDOWED_ABI__) .literal .Ljumptable, 0, .L4, .L8, .L12 mov a3, a0 # move return address out of the way @@ -163,6 +165,27 @@ HIDDEN_ENTRY (__vfork) PSEUDO_END (__vfork) .Lpseudo_end: retw +#elif defined(__XTENSA_CALL0_ABI__) + SAVE_PID(a5, a8, a3, a4) + + /* Use syscall 'clone'. Set new stack pointer to the same address. */ + movi a2, SYS_ify (clone) + movi a3, 0 + movi a6, CLONE_VM | CLONE_VFORK | SIGCHLD + syscall + + RESTORE_PID(a5, a8, a2) + + movi a3, -4096 + bgeu a2, a3, 1f + ret +1: + PSEUDO_END (__vfork) +.Lpseudo_end: + ret +#else +#error Unsupported Xtensa ABI +#endif weak_alias (__vfork, vfork) libc_hidden_def(vfork) diff --git a/libc/sysdeps/linux/xtensa/windowspill.S b/libc/sysdeps/linux/xtensa/windowspill.S index 4167b28..0130256 100644 --- a/libc/sysdeps/linux/xtensa/windowspill.S +++ b/libc/sysdeps/linux/xtensa/windowspill.S @@ -18,6 +18,7 @@ #include <bits/xtensa-config.h> +#ifdef __XTENSA_WINDOWED_ABI__ .text .align 4 .literal_position @@ -93,3 +94,5 @@ __window_spill: #endif #endif retw + +#endif diff --git a/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h b/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h index f82957d..02fe278 100644 --- a/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h +++ b/libpthread/nptl/sysdeps/unix/sysv/linux/xtensa/sysdep-cancel.h @@ -25,6 +25,7 @@ #if !defined NOT_IN_libc || defined IS_IN_libpthread || defined IS_IN_librt +#if defined(__XTENSA_WINDOWED_ABI__) /* CENABLE/CDISABLE in PSEUDO below use call8, stack frame size must be * at least 32. */ @@ -58,6 +59,64 @@ j SYSCALL_ERROR_LABEL; \ .Lpseudo_end: +# define CENABLE movi a8, CENABLE_FUNC; \ + callx8 a8 +# define CDISABLE movi a8, CDISABLE_FUNC; \ + callx8 a8 +#elif defined(__XTENSA_CALL0_ABI__) + +# undef PSEUDO +# define PSEUDO(name, syscall_name, args) \ + .text; \ + ENTRY (name) \ + SINGLE_THREAD_P(a10); \ + bnez a10, .Lpseudo_cancel; \ + DO_CALL (syscall_name, args); \ + bgez a2, .Lpseudo_done; \ + movi a4, -4095; \ + blt a2, a4, .Lpseudo_done; \ + j SYSCALL_ERROR_LABEL; \ + .Lpseudo_done: \ + ret; \ + .Lpseudo_cancel: \ + addi a1, a1, -32; \ + /* The syscall args are in a2...a7; save them */ \ + s32i a0, a1, 0; \ + s32i a2, a1, 4; \ + s32i a3, a1, 8; \ + s32i a4, a1, 12; \ + s32i a5, a1, 16; \ + s32i a6, a1, 20; \ + s32i a7, a1, 24; \ + CENABLE; \ + /* Move return value to a10 preserved across the syscall */ \ + mov a10, a2; \ + l32i a2, a1, 4; \ + l32i a3, a1, 8; \ + l32i a4, a1, 12; \ + l32i a5, a1, 16; \ + l32i a6, a1, 20; \ + l32i a7, a1, 24; \ + DO_CALL (syscall_name, args); \ + s32i a2, a1, 4; \ + mov a2, a10; \ + CDISABLE; \ + l32i a2, a1, 4; \ + l32i a0, a1, 0; \ + addi a1, a1, 32; \ + bgez a2, .Lpseudo_end; \ + movi a4, -4095; \ + blt a2, a4, .Lpseudo_end; \ + j SYSCALL_ERROR_LABEL; \ + .Lpseudo_end: + +# define CENABLE movi a0, CENABLE_FUNC; \ + callx0 a0 +# define CDISABLE movi a0, CDISABLE_FUNC; \ + callx0 a0 +#else +#error Unsupported Xtensa ABI +#endif # ifdef IS_IN_libpthread # define CENABLE_FUNC __pthread_enable_asynccancel @@ -74,11 +133,6 @@ # error Unsupported library # endif -# define CENABLE movi a8, CENABLE_FUNC; \ - callx8 a8 -# define CDISABLE movi a8, CDISABLE_FUNC; \ - callx8 a8 - # if defined IS_IN_libpthread || !defined NOT_IN_libc # ifndef __ASSEMBLER__ extern int __local_multiple_threads attribute_hidden; diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S b/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S index 1e220a8..10b1c00 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S +++ b/libpthread/nptl/sysdeps/xtensa/pthread_spin_lock.S @@ -16,13 +16,10 @@ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ - .text - .align 4 - - .globl pthread_spin_lock -pthread_spin_lock: +#include <sysdep.h> - entry a1, 16 + .text +ENTRY (pthread_spin_lock) movi a3, 0 wsr a3, scompare1 @@ -31,7 +28,6 @@ pthread_spin_lock: bnez a3, 1b movi a2, 0 - retw + abi_ret - .type pthread_spin_lock, @function - .size pthread_spin_lock, .-pthread_spin_lock +END (pthread_spin_lock) diff --git a/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S b/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S index a736b01..4742bdb 100644 --- a/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S +++ b/libpthread/nptl/sysdeps/xtensa/pthread_spin_trylock.S @@ -18,14 +18,10 @@ #define _ERRNO_H 1 #include <bits/errno.h> +#include <sysdep.h> .text - .align 4 - - .globl pthread_spin_trylock -pthread_spin_trylock: - - entry a1, 16 +ENTRY (pthread_spin_trylock) movi a3, 0 wsr a3, scompare1 @@ -34,7 +30,6 @@ pthread_spin_trylock: movi a2, EBUSY moveqz a2, a3, a3 - retw + abi_ret - .type pthread_spin_trylock, @function - .size pthread_spin_trylock, .-pthread_spin_trylock +END (pthread_spin_trylock) diff --git a/test/tls/tls-macros.h b/test/tls/tls-macros.h index 7d89274..315f0e2 100644 --- a/test/tls/tls-macros.h +++ b/test/tls/tls-macros.h @@ -887,6 +887,7 @@ register void *__gp __asm__("$29"); #elif defined __xtensa__ +#if defined(__XTENSA_WINDOWED_ABI__) #define TLS_GD(x) \ ({ int *__l; \ __asm__ ("movi a8, " #x "@TLSFUNC\n\t" \ @@ -909,6 +910,32 @@ register void *__gp __asm__("$29"); : \ : "a8", "a9", "a10", "a11", "a12", "a13", "a14", "a15"); \ __l; }) +#elif defined(__XTENSA_CALL0_ABI__) +#define TLS_GD(x) \ + ({ int *__l; \ + __asm__ ("movi a0, " #x "@TLSFUNC\n\t" \ + "movi a2, " #x "@TLSARG\n\t" \ + "callx0.tls a0, " #x "@TLSCALL\n\t" \ + "mov %0, a2\n\t" \ + : "=r" (__l) \ + : \ + : "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "a10", "a11");\ + __l; }) + +#define TLS_LD(x) \ + ({ int *__l; \ + __asm__ ("movi a0, _TLS_MODULE_BASE_@TLSFUNC\n\t" \ + "movi a2, _TLS_MODULE_BASE_@TLSARG\n\t" \ + "callx0.tls a0, _TLS_MODULE_BASE_@TLSCALL\n\t" \ + "movi %0, " #x "@TPOFF\n\t" \ + "add %0, %0, a2\n\t" \ + : "=r" (__l) \ + : \ + : "a2", "a3", "a4", "a5", "a6", "a7", "a8", "a9", "a10", "a11");\ + __l; }) +#else +#error Unsupported Xtensa ABI +#endif #define TLS_IE(x) TLS_LE(x) hooks/post-receive -- uClibc-ng - small C library for embedded systems

9 years, 5 months

uClibc-ng - small C library for embedded systems branch 1.0 updated. v1.0.6-7-g9fae2ad

by wbx＠helium.waldemar-brodkorb.de

9 years, 5 months

Problem compiling Zsh's mathfunc: "undefined reference to `j0'..."

by Jan

Hi, I seem to have run into a problem when compiling zsh 5.1.1 or older builds down to 5.0.7 with the mathfunc module compiled in. This occurs with regular uclibc as well. Here's the build script I'm using. I run this by typing: sh build "$ARCH". : ${PREFIX:=/opt} SROOT="$(find $CROSS -maxdepth 1 -type d -name ${1}*)" make clean ./configure --host=$1 --prefix=$PREFIX \ --enable-function-subdirs \ --enable-multibyte --enable-cap \ --disable-dynamic --disable-restricted-r \ --enable-zsh-secure-free --with-tcsetpgrp \ --disable-locale \ CC=$CROSS/bin/gcc \ CFLAGS="-Os -s -I$PREFIX/include -I$SROOT/sysroot/usr/include" \ LDFLAGS="-static -L$PREFIX/lib -L$SROOT/sysroot/usr/lib -Wl,-z,norelro -Wl,--hash-style=gnu" \ LD=$CROSS/bin/ld \ STRIP=$CROSS/bin/strip \ RANLIB=$CROSS/bin/ranlib # edit config.modules to enable mathfunc make V=1 This is the error I get: /home/jan/a/uclibc-ng-arm.thumb.nolocale.newlibs/bin/gcc -c -I. -I../Src -I../Src -I../Src/Zle -I. -Os -s -I/opt/include -I/home/jan/a/uclibc-ng-arm.thumb.nolocale.newlibs/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include -DHAVE_CONFIG_H -Os -s -I/opt/include -I/home/jan/a/uclibc-ng-arm.thumb.nolocale.newlibs/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include -o params.o params.c make[3]: Entering directory '/home/jan/a/zsh-5.1.1/Src/Builtins' make[3]: Leaving directory '/home/jan/a/zsh-5.1.1/Src/Builtins' make[3]: Entering directory '/home/jan/a/zsh-5.1.1/Src/Modules' make[4]: Entering directory '/home/jan/a/zsh-5.1.1/Src/Zle' make[4]: 'complete.mdh' is up to date. make[4]: Leaving directory '/home/jan/a/zsh-5.1.1/Src/Zle' make[3]: Leaving directory '/home/jan/a/zsh-5.1.1/Src/Modules' make[3]: Entering directory '/home/jan/a/zsh-5.1.1/Src/Zle' make[3]: Leaving directory '/home/jan/a/zsh-5.1.1/Src/Zle' make[2]: Leaving directory '/home/jan/a/zsh-5.1.1/Src' Updated `stamp-modobjs'. rm -f zsh /home/jan/a/uclibc-ng-arm.thumb.nolocale.newlibs/bin/gcc -static -L/opt/lib -L/home/jan/a/uclibc-ng-arm.thumb.nolocale.newlibs/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib -Wl,-z,norelro -Wl,--hash-style=gnu -o zsh main.o `cat stamp-modobjs` -lcap -ltinfo -lrt -lm -lc Modules/mathfunc.o: In function `math_func': mathfunc.c:(.text+0x3ba): undefined reference to `j0' mathfunc.c:(.text+0x3c0): undefined reference to `j1' mathfunc.c:(.text+0x3ca): undefined reference to `jn' mathfunc.c:(.text+0x446): undefined reference to `y0' mathfunc.c:(.text+0x44c): undefined reference to `y1' mathfunc.c:(.text+0x456): undefined reference to `yn' collect2: error: ld returned 1 exit status Makefile:229: recipe for target 'zsh' failed make[1]: *** [zsh] Error 1 make[1]: Leaving directory '/home/jan/a/zsh-5.1.1/Src' Makefile:190: recipe for target 'all' failed make: *** [all] Error 1 I'm not sure what to make of this. I know that uclibc/uclibc-ng has the bessel functions in libm, but the zsh build still gives this error. I was able to compile zsh with the mathfunc module using a musl toolchain, so I think this is specific to uclibc. The uclibc-ng toolchain I'm using is from a buildroot 08/2015 configuration. I'd really appreciate some pointers on this. Best regards, Jan

9 years, 5 months

Status of TLS and NPTL support for noMMU

by Max Filippov

Hello, I'm trying to build uClibc-based userspace for uclinux. It builds and works as long as I keep uClibc single-threaded. If I enable TLS and NPTL support first I face build errors (one caused by reference to fork from libpthread/nptl/sysdeps/unix/sysv/linux/fork.c, other outside uClibc, in the elf2flt, which cannot deal with .tbss section overlapping .data section) and then runtime errors (an attempt to allocate TLS memory with sbrk which doesn't work in uclinux and then inability to initialize TLS data, which I haven't tracked yet). All that makes me think that either I'm doing something terribly wrong, or TLS + NPTL are not supported by uClibc for uclinux. So my questions are: - are TLS and NPTL supported by uClibc for uclinux? - if not, what are the supported threading options? -- Thanks. -- Max

9 years, 5 months

enabling sigsetmask() support

by Alex Potapenko

Hi, I'm trying to compile a sourcecode that makes use of sigsetmask() function against uClibc-ng 1.0.6. This symbol is missing from uClibc-ng built with default Buildroot 2015.08 config. Which option should be enabled to have it? I only found two signal options in the config: UCLIBC_HAS_OBSOLETE_BSD_SIGNAL and UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL. The former was enabled by default, the latter was off, but turning it on doesn't help too. I see that sigsetmask() is just a wrapper around sigset_set_old_mask, sigprocmask and sigset_get_old_mask, but I don't want to resort to patching the user app sourcecode if possible. Thanks, Alex

9 years, 6 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

devel