This is an updated patch for static pie support. I have corrected formatting and code standard issues which appeared in my previous patches. I also updated the commit message to be clearer on what is occurring and why.
From 92056b7db87be00e6daea59a4f82d022bfc7f223 Mon Sep 17 00:00:00 2001
From: linted <
linted@users.noreply.github.com>
Date: Sun, 17 Jul 2022 13:38:49 -0400
Subject: [PATCH] Added support for creation of Static Position-Independent
Executables (PIE) on i386, x86_64, and arm.
This patch adds the generation of rcrt1.o which is used by gcc when compiling with the --static-pie flag.
rcrt1.o differs from crt1.o and Scrt1.o in that it the executable has a dynamic section but no relocations have been performed prior to _start being called.
crt1.o assumes there to be no dynamic relocations, and Scrt1.o has all relocations performed prior to execution by lsdo.
The new reloc_static_pie function handles parsing the elf headers, locating the dynamic section, and performing the relocations in a architecture agnostic method.
This allows for easier porting of static-pie support to additional architectures.
Signed-off-by: linted <
linted@users.noreply.github.com>
---
Makerules | 5 ++++
extra/Configs/Config.in | 5 ++++
libc/misc/internals/Makefile.in | 1 +
libc/misc/internals/reloc_static_pie.c | 41 ++++++++++++++++++++++++++
libc/sysdeps/linux/arm/crt1.S | 15 ++++++++++
libc/sysdeps/linux/i386/crt1.S | 20 +++++++++++++
libc/sysdeps/linux/x86_64/crt1.S | 16 +++++++++-
7 files changed, 102 insertions(+), 1 deletion(-)
create mode 100644 libc/misc/internals/reloc_static_pie.c
diff --git a/Makerules b/Makerules
index fd40e6c7b..845d81897 100644
--- a/Makerules
+++ b/Makerules
@@ -405,8 +405,13 @@ else
CRTS=$(top_builddir)lib/$(CRT).o
endif
+ifeq ($(STATIC_PIE),y)
+CRTS+=$(top_builddir)lib/r$(CRT).o
+endif
+
ASFLAGS-$(CRT).o := -DL_$(CRT)
ASFLAGS-S$(CRT).o := $(PIEFLAG) -DL_S$(CRT)
+ASFLAGS-r$(CRT).o := $(PIEFLAG) -DL_r$(CRT)
$(CRTS): $(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)/$(CRT).S
$(compile.S)
$(Q)$(STRIPTOOL) -x -R .note -R .comment $@
diff --git a/extra/Configs/Config.in b/extra/Configs/Config.in
index a58ceb265..a49278b30 100644
--- a/extra/Configs/Config.in
+++ b/extra/Configs/Config.in
@@ -301,6 +301,11 @@ config DOPIC
If you wish to build all of uClibc as PIC objects, then answer Y here.
If you are unsure, then you should answer N.
+config STATIC_PIE
+ bool "Add support for Static Position Independent Executables (PIE)"
+ default n
+ depends on DOPIC && !UCLIBC_FORMAT_FDPIC_ELF && (TARGET_arm || TARGET_i386 || TARGET_x86_64)
+
config ARCH_HAS_NO_SHARED
bool
diff --git a/libc/misc/internals/Makefile.in b/libc/misc/internals/Makefile.in
index a8e4e36f9..4a6e73d2d 100644
--- a/libc/misc/internals/Makefile.in
+++ b/libc/misc/internals/Makefile.in
@@ -34,6 +34,7 @@ libc-static-$(UCLIBC_FORMAT_FLAT_SEP_DATA) += \
libc-static-$(UCLIBC_FORMAT_SHARED_FLAT) += \
$(MISC_INTERNALS_OUT)/shared_flat_initfini.o \
$(MISC_INTERNALS_OUT)/shared_flat_add_library.o
+libc-static-$(STATIC_PIE) += $(MISC_INTERNALS_OUT)/reloc_static_pie.o
libc-shared-$(UCLIBC_FORMAT_SHARED_FLAT) += \
$(MISC_INTERNALS_OUT)/shared_flat_initfini.os \
$(MISC_INTERNALS_OUT)/shared_flat_add_library.os
diff --git a/libc/misc/internals/reloc_static_pie.c b/libc/misc/internals/reloc_static_pie.c
new file mode 100644
index 000000000..9a8066b84
--- /dev/null
+++ b/libc/misc/internals/reloc_static_pie.c
@@ -0,0 +1,41 @@
+/* Support for relocating static PIE.
+ Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <
https://www.gnu.org/licenses/>. */
+
+#include <link.h>
+#include <elf.h>
+#include <dl-elf.h>
+
+void
+reloc_static_pie (ElfW(Addr) load_addr)
+{
+ ElfW(Word) relative_count = 0;
+ ElfW(Addr) rel_addr = NULL;
+ ElfW(Dyn) * dyn_addr = NULL;
+ unsigned long dynamic_info[DYNAMIC_SIZE] = {0};
+
+ /* Read our own dynamic section and fill in the info array. */
+ dyn_addr = ((void *) load_addr + elf_machine_dynamic ());
+
+ /* Use the underlying function to avoid TLS access before initialization */
+ __dl_parse_dynamic_info(dyn_addr, dynamic_info, NULL, load_addr);
+
+ /* Perform relocations */
+ relative_count = dynamic_info[DT_RELCONT_IDX];
+ rel_addr = dynamic_info[DT_RELOC_TABLE_ADDR];
+ elf_machine_relative(load_addr, rel_addr, relative_count);
+}
diff --git a/libc/sysdeps/linux/arm/crt1.S b/libc/sysdeps/linux/arm/crt1.S
index a1d7f0f23..2aa2a5234 100644
--- a/libc/sysdeps/linux/arm/crt1.S
+++ b/libc/sysdeps/linux/arm/crt1.S
@@ -246,6 +246,18 @@ _start:
mov lr, #0
#ifdef __ARCH_USE_MMU__
+#ifdef L_rcrt1
+ /* We don't need to save a1 since no dynamic linker should have run */
+ ldr a1, .L_GOT /* Get value at .L_GOT + 0 (offset to GOT)*/
+ adr a2, .L_GOT /* Get address of .L_GOT */
+ ldr a3, .L_GOT+16 /* get value of _start(GOT) stored in .L_GOT */
+ adr a4, _start /* get address of _start after relocation (changes to pc - ~30 or so) */
+ add a1, a1, a2 /* calculate where the GOT is */
+ ldr a2, [a1, a3] /* GOT + _start(GOT) = offset of _start from begin of file */
+ sub a1, a4, a2 /* current addr of _start - offset from beginning of file = load addr */
+ bl reloc_static_pie
+ mov a1, #0 /* Clean up a1 so that a random address won't get called at the end of program */
+#endif
/* Pop argc off the stack and save a pointer to argv */
ldr a2, [sp], #4
mov a3, sp
@@ -309,6 +321,9 @@ _start:
.word _fini(GOT)
.word _init(GOT)
.word main(GOT)
+#ifdef L_rcrt1
+ .word _start(GOT)
+#endif
#endif
#endif
diff --git a/libc/sysdeps/linux/i386/crt1.S b/libc/sysdeps/linux/i386/crt1.S
index 35a6552e8..decc68967 100644
--- a/libc/sysdeps/linux/i386/crt1.S
+++ b/libc/sysdeps/linux/i386/crt1.S
@@ -67,6 +67,9 @@
#endif
.type main,%function
.type __uClibc_main,%function
+#ifdef L_rcrt1
+.type reloc_static_pie,%function
+#endif
_start:
/* Clear the frame pointer. The ABI suggests this be done, to mark
the outermost frame obviously. */
@@ -100,6 +103,23 @@ _start:
pop %ebx
addl $_GLOBAL_OFFSET_TABLE_+[.-.L0],%ebx
+#ifdef L_rcrt1
+ /* We cannot rely on _DYNAMIC being usable here due to RELRO.
+ Instead we calculate the load address based off a symbol
+ that we know will exist, _start. */
+ pushl %ecx /* Save ecx so it won't get clobbered */
+ pushl %ebx /* Save ebx so it won't get clobbered */
+ xorl %ecx, %ecx /* Clear ecx */
+ addl _start@GOT(%ebx), %ecx /* Get the offset of _start */
+ movl _start@GOT(%ebx), %eax /* Get the run time address of _start */
+ subl %ecx, %eax /* Subtract to find the load address */
+ pushl %eax /* Pass the load address */
+ call reloc_static_pie@PLT
+ popl %eax /* Clean up from function call */
+ popl %ebx /* Restore the GOT address */
+ popl %ecx /* restore ecx */
+#endif
+
/* Push address of our own entry points to .fini and .init. */
pushl _fini@GOT(%ebx)
pushl _init@GOT(%ebx)
diff --git a/libc/sysdeps/linux/x86_64/crt1.S b/libc/sysdeps/linux/x86_64/crt1.S
index 87777dd5d..701cbf2f6 100644
--- a/libc/sysdeps/linux/x86_64/crt1.S
+++ b/libc/sysdeps/linux/x86_64/crt1.S
@@ -80,6 +80,20 @@ _start:
the outermost frame obviously. */
xorl %ebp, %ebp
+#ifdef L_rcrt1
+ pushq %rdi /* save rdi (but should be 0...) */
+ pushq %rdx /* store rdx (rtld_fini) */
+ xorq %rcx, %rcx /* ensure rcx is 0 */
+ addq _start@GOTPCREL(%rip), %rcx /* get offset of _start from beginning of file */
+ movq _start@GOTPCREL(%rip), %rax /* get run time address of _start */
+ subq %rcx, %rax /* calculate run time load offset */
+ movq %rax, %rdi /* load offset -> param 1 */
+ call reloc_static_pie /* relocate dynamic addrs */
+ xorq %rax, %rax /* cleanup */
+ popq %rdx
+ popq %rdi
+#endif
+
/* Extract the arguments as encoded on the stack and set up
the arguments for __libc_start_main (int (*main) (int, char **, char **),
int argc, char *argv,
@@ -107,7 +121,7 @@ _start:
which grow downwards). */
pushq %rsp
-#if defined(L_Scrt1)
+#if defined(L_Scrt1) || defined(L_rcrt1)
/* Give address for main() */
movq main@GOTPCREL(%rip), %rdi
--
2.34.1