Hi,

thanks, applied and pushed, best regards Waldemar

Marcus Haehnel wrote,

From: Valentin Gehrke valentin.gehrke@kernkonzept.com

ARMv8 has particular restrictions which coprocessor can be used and as such these instructions, which were likely used for backwards compatibility purposes, cannot be used on ARMv8. We solve this by checking for ARMv8 and then using the corresponding mnemonics which were placed in comments alongside the instructions causing issues.

Fixes the following errors:

.../setjmp.S:59:6: error: invalid operand for instruction stc p11, cr8, [r12], #68 ^ .../setjmp.S:62:6: error: invalid operand for instruction mrc p10, 7, r2, cr1, cr0, 0 ^ .../__longjmp.S:69:6: error: invalid operand for instruction ldc p11, cr8, [r12], #68 ^ .../__longjmp.S:73:6: error: invalid operand for instruction mcr p10, 7, r1, cr1, cr0, 0 ^

Signed-off-by: Marcus Haehnel marcus.haehnel@kernkonzept.com

libc/sysdeps/linux/arm/__longjmp.S | 8 ++++++++ libc/sysdeps/linux/arm/setjmp.S | 8 ++++++++ 2 files changed, 16 insertions(+)

diff --git a/libc/sysdeps/linux/arm/__longjmp.S b/libc/sysdeps/linux/arm/__longjmp.S index 58ae8ab58..a5ffe84e9 100644 --- a/libc/sysdeps/linux/arm/__longjmp.S +++ b/libc/sysdeps/linux/arm/__longjmp.S @@ -64,6 +64,13 @@ __longjmp:

#if defined __UCLIBC_HAS_FLOATS__ && ! defined __UCLIBC_HAS_SOFT_FLOAT__ #ifdef __VFP_FP__ +# if __ARM_ARCH >= 8

• /* Restore the VFP registers. */
• fldmiax ip!, {d8-d15}
• /* Restore the floating-point status register. */
• ldr r1, [ip], #4
• fmxr fpscr, r1

+# else /* Restore the VFP registers. */ /* Following instruction is fldmiax ip!, {d8-d15}. */ ldc p11, cr8, [r12], #68 @@ -71,6 +78,7 @@ __longjmp: ldr r1, [ip], #4 /* Following instruction is fmxr fpscr, r1. */ mcr p10, 7, r1, cr1, cr0, 0 +# endif # elif defined __MAVERICK__ cfldrd mvd4, [ip], #8 ; nop cfldrd mvd5, [ip], #8 ; nop diff --git a/libc/sysdeps/linux/arm/setjmp.S b/libc/sysdeps/linux/arm/setjmp.S index f7a74cc5a..d5bc9ba65 100644 --- a/libc/sysdeps/linux/arm/setjmp.S +++ b/libc/sysdeps/linux/arm/setjmp.S @@ -54,6 +54,13 @@ __sigsetjmp: #endif #if defined __UCLIBC_HAS_FLOATS__ && ! defined __UCLIBC_HAS_SOFT_FLOAT__ # ifdef __VFP_FP__ +# if __ARM_ARCH >= 8

• /* Store the VFP registers. */
• fstmiax ip!, {d8-d15}
• /* Store the floating-point status register. */
• fmrx r2, fpscr
• str r2, [ip], #4

+# else /* Store the VFP registers. */ /* Following instruction is fstmiax ip!, {d8-d15}. */ stc p11, cr8, [r12], #68 @@ -61,6 +68,7 @@ __sigsetjmp: /* Following instruction is fmrx r2, fpscr. */ mrc p10, 7, r2, cr1, cr0, 0 str r2, [ip], #4 +# endif # elif defined __MAVERICK__ cfstrd mvd4, [ip], #8 ; nop cfstrd mvd5, [ip], #8 ; nop -- 2.45.2

---

devel mailing list -- devel@uclibc-ng.org To unsubscribe send an email to devel-leave@uclibc-ng.org