[uclibc-ng-devel] uClibc-ng - small C library for embedded systems branch 1.0 updated. v1.0.9-57-g0ad7307

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "uClibc-ng - small C library for embedded systems". The branch, 1.0 has been updated via 0ad73077c230093ae004829da44418597f330c6a (commit) via cc82a850a0ebfbacb7fb62ea2c5b7dd6aebb005d (commit) via 2636b17616a19d628c3dbc373ebae67ef6e2b1f6 (commit) via e3c3bf2b5801d0cc544e732fcee1ba51121051b3 (commit) via f5bdd8ff82607e55a1c511e13e37a984408c8094 (commit) via 2a3ffa836a3a9f94f19ee2671f41c1851221a105 (commit) via 74b17c7956b8f0bd109b0fd26a8a9869441d09bf (commit) via 73491f469c244ec077e8448d41c4e193b6a3599b (commit) via 6b4bcce3cbb89442f96e2e47a507b5983f27a191 (commit) via 6994bbf289dc098d38b27521da3a7431e17736db (commit) from 836c1a7baa9421c1222e022cdc263d8c1a5a2b14 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 0ad73077c230093ae004829da44418597f330c6a Author: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; Date: Thu Dec 24 00:46:18 2015 +0100 prepare for release of 1.0.10 commit cc82a850a0ebfbacb7fb62ea2c5b7dd6aebb005d Author: Steve Ellcey &lt;sellcey(a)imgtec.com&gt; Date: Wed Dec 23 08:38:41 2015 -0800 Replace bltzal with lapc for MIPS R6 builds. The R6 version of MIPS does not support the bltzal instruction. This patch changes dl-startup.h and dl-sysdep.h to use lapc on R6 instead. lapc is a new R6 insruction so older systems need to continue to use bltzal in order to load register $31. Signed-off-by: Steve Ellcey &lt;sellcey(a)imgtec.com&gt; commit 2636b17616a19d628c3dbc373ebae67ef6e2b1f6 Author: Steve Ellcey &lt;sellcey(a)imgtec.com&gt; Date: Mon Dec 21 13:22:07 2015 -0800 Replace MIPS specific memcpy.S/memset.S with version from glibc/newlib. These MIPS specific versions of memcpy.S and memset.S are faster than the current ones and match what is in newlib and glibc. They also have support for the mips32r6 and mips64r6 architectures. Signed-off-by: Steve Ellcey &lt;sellcey(a)imgtec.com&gt; commit e3c3bf2b5801d0cc544e732fcee1ba51121051b3 Author: Nicolas S. Dade &lt;nic.dade(a)gmail.com&gt; Date: Fri Dec 18 19:39:19 2015 -0800 pselect: Use linux pselect syscall when available Linux has a pselect syscall since 2.6.something. Using it rather than emulating it with sigprocmask+select+sigprocmask is smaller code, and works properly. (The emulation has race conditions when unblocked signals arrive before or after the select) The tv.nsec >= 1E9 handling comes from uclibc's linux select() implementation, which itself uses pselect() internally if the pselect syscall exists. I though it would be good to do the same here. Note that although the libc pselect() API has 6 arguments, the linux kernel syscall as 7 arguments. There is an extra, somewhat vestigial, sizeof the signal mask argument. Signed-off-by: Nicolas S. Dade &lt;nic.dade(a)gmail.com&gt; commit f5bdd8ff82607e55a1c511e13e37a984408c8094 Author: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; Date: Tue Dec 22 10:58:08 2015 +0100 libc/pwd_grp: Create template for non-reentrant functions Avoid a lot of copy'n'paste code, no functionality change Signed-off-by: Leonid Lisovskiy &lt;lly.dev(a)gmail.com&gt; commit 2a3ffa836a3a9f94f19ee2671f41c1851221a105 Author: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; Date: Tue Dec 22 10:56:08 2015 +0100 Use gcc's __builtin_mempcpy() as __mempcpy(), if possible Patch from OpenWrt. Reported-by: Leonid Lisovskiy &lt;lly.dev(a)gmail.com&gt; commit 74b17c7956b8f0bd109b0fd26a8a9869441d09bf Author: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; Date: Tue Dec 22 10:51:13 2015 +0100 use arch specific thread stack size for nptl Use the arch specific thread stack size for nptl if the size returned by getrlimits exceeds it - fixes threads on systems with only 16 MB RAM. Patch from OpenWRT Reported-by: Leonid Lisovskiy &lt;lly.dev(a)gmail.com&gt; commit 73491f469c244ec077e8448d41c4e193b6a3599b Author: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; Date: Tue Dec 22 10:52:55 2015 +0100 Do define some IPv6 related symbols even with IPv6 disabled Fixes compilation of some faulty applictions. Patch from Freetz.org Reported-by: Leonid Lisovskiy &lt;lly.dev(a)gmail.com&gt; commit 6b4bcce3cbb89442f96e2e47a507b5983f27a191 Author: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; Date: Tue Dec 22 10:47:56 2015 +0100 resolv: fix gethostbyname2_r to match gethostbyname_r, fixing bugs with AAAA lookups The latter half of gethostbyname2_r (doing AAAA queries) is rather dramatically different from the corresponding portion of gethostbyname_r (doing A queries). This leads to problems like calls to getaddrinfo only returning one IPv6 address, even when multiple exist. Seems to be entirely a case of divergent evolution -- a half-decade of fixes for the IPv4 code but no love for IPv6. Until now. ;) DNS behaviour for IPv6 is really no different than for IPv4 -- beyond the difference in address sizes, there's no need for the functions to be so different. Consequently, this patch really is almost just a cut-and-paste of gethostbyname_r, with the appropriate substitutions of in6_addr, AF_INET6, etc; while holding on to the few extra bits that actually belong in there (eg #ifdef __UCLIBC_HAS_IPV6__). Signed-off-by: Wes Campaigne &lt;westacular(a)gmail.com&gt; commit 6994bbf289dc098d38b27521da3a7431e17736db Author: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; Date: Tue Dec 22 10:45:51 2015 +0100 inet/resolv: Fix broken h_aliases list terminator after 2dab3f5 Commit 2dab3f5a "resolv: tiny shrinkage in /etc/hosts handling" leads to that read_etc_hosts_r() provide garbage pointer at the end of h_aliases list if more than four hostnames follow a dotted quad in /etc/hosts Test-case: Add following line to /etc/hosts 63.63.0.2 host1 alias2 alias3 alias4 alias5 #include <stdio.h> #include <errno.h> #include <netdb.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> int main (void) { int i; char *a; struct hostent *he; struct in_addr ipv4addr; inet_pton(AF_INET, "63.63.0.2", &ipv4addr); he = gethostbyaddr(&ipv4addr, sizeof ipv4addr, AF_INET); if (he == NULL) exit(1); printf("Host name: '%s'\n", he->h_name); i = 0; while ((a = he->h_aliases[i]) != NULL) { printf("Host alias: '%s'\n", a); ++i; } return 0; } Wrong output: Host name: 'host1' Host alias: 'alias2' Host alias: 'alias3' Host alias: 'alias4' Host alias: 'alias5' Host alias: '??' Signed-off-by: Leonid Lisovskiy &lt;lly.dev(a)gmail.com&gt; Signed-off-by: Waldemar Brodkorb &lt;wbx(a)uclibc-ng.org&gt; ----------------------------------------------------------------------- Summary of changes: Rules.mak | 2 +- include/string.h | 4 +- ldso/ldso/mips/dl-startup.h | 5 + ldso/ldso/mips/dl-sysdep.h | 5 + libc/inet/resolv.c | 165 ++++-- libc/pwd_grp/fgetgrent.c | 12 +- libc/pwd_grp/fgetpwent.c | 12 +- libc/pwd_grp/fgetspent.c | 6 +- libc/pwd_grp/getgrent.c | 5 +- libc/pwd_grp/getgrgid.c | 6 +- libc/pwd_grp/getgrgid_r.c | 7 +- libc/pwd_grp/getgrnam.c | 6 +- libc/pwd_grp/getgrnam_r.c | 7 +- libc/pwd_grp/getpwent.c | 5 +- libc/pwd_grp/getpwnam.c | 7 +- libc/pwd_grp/getpwnam_r.c | 7 +- libc/pwd_grp/getpwuid.c | 6 +- libc/pwd_grp/getpwuid_r.c | 7 +- libc/pwd_grp/getspent.c | 5 +- libc/pwd_grp/getspnam.c | 6 +- libc/pwd_grp/getspnam_r.c | 7 +- libc/pwd_grp/pwd_grp.c | 263 +-------- libc/pwd_grp/pwd_grp_internal.c | 49 +- libc/pwd_grp/sgetspent.c | 6 +- libc/string/generic/mempcpy.c | 1 + libc/string/mips/memcpy.S | 1051 +++++++++++++++++++++++++++-------- libc/string/mips/memset.S | 516 +++++++++++++---- libc/sysdeps/linux/common/bits/in.h | 2 +- libc/sysdeps/linux/common/pselect.c | 52 ++ libpthread/nptl/init.c | 4 + 30 files changed, 1549 insertions(+), 687 deletions(-) diff --git a/Rules.mak b/Rules.mak index 7652aab..7f244b4 100644 --- a/Rules.mak +++ b/Rules.mak @@ -126,7 +126,7 @@ export RUNTIME_PREFIX DEVEL_PREFIX KERNEL_HEADERS MULTILIB_DIR # Now config hard core MAJOR_VERSION := 1 MINOR_VERSION := 0 -SUBLEVEL := 9 +SUBLEVEL := 10 EXTRAVERSION := VERSION := $(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL) ABI_VERSION := $(MAJOR_VERSION) diff --git a/include/string.h b/include/string.h index 1d75f44..80585ef 100644 --- a/include/string.h +++ b/include/string.h @@ -258,7 +258,9 @@ extern void *memmem (const void *__haystack, size_t __haystacklen, /* Copy N bytes of SRC to DEST, return pointer to bytes after the last written byte. */ -#if 0 /* uClibc: disabled */ +#if __GNUC_PREREQ (3, 4) +# define __mempcpy(dest, src, n) __builtin_mempcpy(dest, src, n) +#else /* uClibc: disabled */ extern void *__mempcpy (void *__restrict __dest, const void *__restrict __src, size_t __n) __THROW __nonnull ((1, 2)); diff --git a/ldso/ldso/mips/dl-startup.h b/ldso/ldso/mips/dl-startup.h index 4d9918d..0cab7be 100644 --- a/ldso/ldso/mips/dl-startup.h +++ b/ldso/ldso/mips/dl-startup.h @@ -37,6 +37,7 @@ __asm__("" #if _MIPS_SIM == _MIPS_SIM_ABI32 " subu $29, 16\n" #endif +# if !defined __mips_isa_rev || __mips_isa_rev < 6 #if _MIPS_SIM == _MIPS_SIM_ABI64 " dla $8, .coff\n" #else /* O32 || N32 */ @@ -44,6 +45,10 @@ __asm__("" #endif /* O32 || N32 */ " bltzal $8, .coff\n" ".coff:\n" +# else + ".coff:\n" + " lapc $31, .coff\n" +# endif #if _MIPS_SIM == _MIPS_SIM_ABI64 " dsubu $8, $31, $8\n" " dla $25, _dl_start\n" diff --git a/ldso/ldso/mips/dl-sysdep.h b/ldso/ldso/mips/dl-sysdep.h index 6041245..b2caa7f 100644 --- a/ldso/ldso/mips/dl-sysdep.h +++ b/ldso/ldso/mips/dl-sysdep.h @@ -225,10 +225,15 @@ elf_machine_load_address (void) { ElfW(Addr) addr; __asm__ (" .set noreorder\n" +# if !defined __mips_isa_rev || __mips_isa_rev < 6 " " STRINGXP (PTR_LA) " %0, 0f\n" " bltzal $0, 0f\n" " nop\n" "0: " STRINGXP (PTR_SUBU) " %0, $31, %0\n" +#else + "0: lapc $31, 0\n" + " " STRINGXP (PTR_SUBU) " %0, $31, %0\n" +#endif " .set reorder\n" : "=r" (addr) : /* No inputs */ diff --git a/libc/inet/resolv.c b/libc/inet/resolv.c index 8e5a97d..3851b2a 100644 --- a/libc/inet/resolv.c +++ b/libc/inet/resolv.c @@ -1596,7 +1596,7 @@ parser_t * __open_etc_hosts(void) #define MINTOKENS 2 /* ip address + canonical name */ #define MAXTOKENS (MINTOKENS + MAXALIASES) -#define HALISTOFF (sizeof(char*) * MAXTOKENS) +#define HALISTOFF (sizeof(char*) * (MAXTOKENS + 1)) /* reserve space for list terminator */ #define INADDROFF (HALISTOFF + 2 * sizeof(char*)) int __read_etc_hosts_r( @@ -2200,12 +2200,13 @@ int gethostbyname2_r(const char *name, ? gethostbyname_r(name, result_buf, buf, buflen, result, h_errnop) : HOST_NOT_FOUND; #else - struct in6_addr *in; struct in6_addr **addr_list; + char **alias; + char *alias0; unsigned char *packet; struct resolv_answer a; int i; - int nest = 0; + int packet_len; int wrong_af = 0; if (family == AF_INET) @@ -2220,9 +2221,8 @@ int gethostbyname2_r(const char *name, /* do /etc/hosts first */ { - int old_errno = errno; /* Save the old errno and reset errno */ - __set_errno(0); /* to check for missing /etc/hosts. */ - + int old_errno = errno; /* save the old errno and reset errno */ + __set_errno(0); /* to check for missing /etc/hosts. */ i = __get_hosts_byname_r(name, AF_INET6 /*family*/, result_buf, buf, buflen, result, h_errnop); if (i == NETDB_SUCCESS) { @@ -2244,42 +2244,58 @@ int gethostbyname2_r(const char *name, } __set_errno(old_errno); } + DPRINTF("Nothing found in /etc/hosts\n"); *h_errnop = NETDB_INTERNAL; + /* prepare future h_aliases[0] */ + i = strlen(name) + 1; + if ((ssize_t)buflen <= i) + return ERANGE; + memcpy(buf, name, i); /* paranoia: name might change */ + alias0 = buf; + buf += i; + buflen -= i; /* make sure pointer is aligned */ i = ALIGN_BUFFER_OFFSET(buf); buf += i; buflen -= i; /* Layout in buf: - * struct in6_addr* in; - * struct in6_addr* addr_list[2]; - * char scratch_buf[256]; + * char *alias[2]; + * struct in6_addr* addr_list[NN+1]; + * struct in6_addr* in[NN]; */ - in = (struct in6_addr*)buf; - buf += sizeof(*in); - buflen -= sizeof(*in); - addr_list = (struct in6_addr**)buf; - buf += sizeof(*addr_list) * 2; - buflen -= sizeof(*addr_list) * 2; + alias = (char **)buf; + buf += sizeof(alias[0]) * 2; + buflen -= sizeof(alias[0]) * 2; + addr_list = (struct in6_addr **)buf; + /* buflen may be < 0, must do signed compare */ if ((ssize_t)buflen < 256) return ERANGE; - addr_list[0] = in; - addr_list[1] = NULL; - strncpy(buf, name, buflen); - buf[buflen] = '\0'; + + /* we store only one "alias" - the name itself */ +#ifdef __UCLIBC_MJN3_ONLY__ +#warning TODO -- generate the full list +#endif + alias[0] = alias0; + alias[1] = NULL; /* maybe it is already an address? */ - if (inet_pton(AF_INET6, name, in)) { - result_buf->h_name = buf; - result_buf->h_addrtype = AF_INET6; - result_buf->h_length = sizeof(*in); - result_buf->h_addr_list = (char **) addr_list; - /* result_buf->h_aliases = ??? */ - *result = result_buf; - *h_errnop = NETDB_SUCCESS; - return NETDB_SUCCESS; + { + struct in6_addr *in = (struct in6_addr *)(buf + sizeof(addr_list[0]) * 2); + if (inet_pton(AF_INET6, name, in)) { + addr_list[0] = in; + addr_list[1] = NULL; + result_buf->h_name = alias0; + result_buf->h_aliases = alias; + result_buf->h_addrtype = AF_INET6; + result_buf->h_length = sizeof(struct in6_addr); + result_buf->h_addr_list = (char **) addr_list; + *result = result_buf; + *h_errnop = NETDB_SUCCESS; + return NETDB_SUCCESS; + } } /* what if /etc/hosts has it but it's not IPv6? @@ -2291,51 +2307,80 @@ int gethostbyname2_r(const char *name, } /* talk to DNS servers */ -/* TODO: why it's so different from gethostbyname_r (IPv4 case)? */ - memset(&a, '\0', sizeof(a)); - for (;;) { - int packet_len; + a.buf = buf; + /* take into account that at least one address will be there, + * we'll need space of one in6_addr + two addr_list[] elems */ + a.buflen = buflen - ((sizeof(addr_list[0]) * 2 + sizeof(struct in6_addr))); + a.add_count = 0; + packet_len = __dns_lookup(name, T_AAAA, &packet, &a); + if (packet_len < 0) { + *h_errnop = HOST_NOT_FOUND; + DPRINTF("__dns_lookup returned < 0\n"); + return TRY_AGAIN; + } -/* Hmm why we memset(a) to zeros only once? */ - packet_len = __dns_lookup(buf, T_AAAA, &packet, &a); - if (packet_len < 0) { - *h_errnop = HOST_NOT_FOUND; - return TRY_AGAIN; + if (a.atype == T_AAAA) { /* ADDRESS */ + /* we need space for addr_list[] and one IPv6 address */ + /* + 1 accounting for 1st addr (it's in a.rdata), + * another + 1 for NULL in last addr_list[]: */ + int need_bytes = sizeof(addr_list[0]) * (a.add_count + 1 + 1) + /* for 1st addr (it's in a.rdata): */ + + sizeof(struct in6_addr); + /* how many bytes will 2nd and following addresses take? */ + int ips_len = a.add_count * a.rdlength; + + buflen -= (need_bytes + ips_len); + if ((ssize_t)buflen < 0) { + DPRINTF("buffer too small for all addresses\n"); + /* *h_errnop = NETDB_INTERNAL; - already is */ + i = ERANGE; + goto free_and_ret; } - strncpy(buf, a.dotted, buflen); - free(a.dotted); - if (a.atype != T_CNAME) - break; + /* if there are additional addresses in buf, + * move them forward so that they are not destroyed */ + DPRINTF("a.add_count:%d a.rdlength:%d a.rdata:%p\n", a.add_count, a.rdlength, a.rdata); + memmove(buf + need_bytes, buf, ips_len); - DPRINTF("Got a CNAME in gethostbyname()\n"); - if (++nest > MAX_RECURSE) { - *h_errnop = NO_RECOVERY; - return -1; + /* 1st address is in a.rdata, insert it */ + buf += need_bytes - sizeof(struct in6_addr); + memcpy(buf, a.rdata, sizeof(struct in6_addr)); + + /* fill addr_list[] */ + for (i = 0; i <= a.add_count; i++) { + addr_list[i] = (struct in6_addr*)buf; + buf += sizeof(struct in6_addr); } - i = __decode_dotted(packet, a.rdoffset, packet_len, buf, buflen); - free(packet); - if (i < 0) { - *h_errnop = NO_RECOVERY; - return -1; + addr_list[i] = NULL; + + /* if we have enough space, we can report "better" name + * (it may contain search domains attached by __dns_lookup, + * or CNAME of the host if it is different from the name + * we used to find it) */ + if (a.dotted && buflen > strlen(a.dotted)) { + strcpy(buf, a.dotted); + alias0 = buf; } - } - if (a.atype == T_AAAA) { /* ADDRESS */ - memcpy(in, a.rdata, sizeof(*in)); - result_buf->h_name = buf; + + result_buf->h_name = alias0; + result_buf->h_aliases = alias; result_buf->h_addrtype = AF_INET6; - result_buf->h_length = sizeof(*in); + result_buf->h_length = sizeof(struct in6_addr); result_buf->h_addr_list = (char **) addr_list; - /* result_buf->h_aliases = ??? */ - free(packet); *result = result_buf; *h_errnop = NETDB_SUCCESS; - return NETDB_SUCCESS; + i = NETDB_SUCCESS; + goto free_and_ret; } - free(packet); + *h_errnop = HOST_NOT_FOUND; - return TRY_AGAIN; + __set_h_errno(HOST_NOT_FOUND); + i = TRY_AGAIN; + free_and_ret: + free(a.dotted); + free(packet); + return i; #endif /* __UCLIBC_HAS_IPV6__ */ } libc_hidden_def(gethostbyname2_r) diff --git a/libc/pwd_grp/fgetgrent.c b/libc/pwd_grp/fgetgrent.c index 695aee1..6a45799 100644 --- a/libc/pwd_grp/fgetgrent.c +++ b/libc/pwd_grp/fgetgrent.c @@ -4,5 +4,15 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_fgetgrent +#include <features.h> + +#ifdef __USE_SVID + +#define GETXXKEY_FUNC fgetgrent +#define GETXXKEY_ENTTYPE struct group +#define GETXXKEY_ADD_PARAMS FILE *stream +#define GETXXKEY_ADD_VARIABLES stream +#define GETXXKEY_BUFLEN __UCLIBC_GRP_BUFFER_SIZE__ #include "pwd_grp.c" + +#endif diff --git a/libc/pwd_grp/fgetpwent.c b/libc/pwd_grp/fgetpwent.c index ddcc7ff..6f65cf6 100644 --- a/libc/pwd_grp/fgetpwent.c +++ b/libc/pwd_grp/fgetpwent.c @@ -4,5 +4,15 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_fgetpwent +#include <features.h> + +#ifdef __USE_SVID + +#define GETXXKEY_FUNC fgetpwent +#define GETXXKEY_ENTTYPE struct passwd +#define GETXXKEY_ADD_PARAMS FILE *stream +#define GETXXKEY_ADD_VARIABLES stream +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ #include "pwd_grp.c" + +#endif diff --git a/libc/pwd_grp/fgetspent.c b/libc/pwd_grp/fgetspent.c index b7c1ef2..77ca0b8 100644 --- a/libc/pwd_grp/fgetspent.c +++ b/libc/pwd_grp/fgetspent.c @@ -4,5 +4,9 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_fgetspent +#define GETXXKEY_FUNC fgetspent +#define GETXXKEY_ENTTYPE struct spwd +#define GETXXKEY_ADD_PARAMS FILE *stream +#define GETXXKEY_ADD_VARIABLES stream +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getgrent.c b/libc/pwd_grp/getgrent.c index 808e4e8..5b03b31 100644 --- a/libc/pwd_grp/getgrent.c +++ b/libc/pwd_grp/getgrent.c @@ -4,5 +4,8 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getgrent +#define GETXXKEY_FUNC getgrent +#define GETXXKEY_ENTTYPE struct group +#define GETXXKEY_ADD_PARAMS void +#define GETXXKEY_BUFLEN __UCLIBC_GRP_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getgrgid.c b/libc/pwd_grp/getgrgid.c index 96ce903..2988452 100644 --- a/libc/pwd_grp/getgrgid.c +++ b/libc/pwd_grp/getgrgid.c @@ -4,5 +4,9 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getgrgid +#define GETXXKEY_FUNC getgrgid +#define GETXXKEY_ENTTYPE struct group +#define GETXXKEY_ADD_PARAMS gid_t git +#define GETXXKEY_ADD_VARIABLES git +#define GETXXKEY_BUFLEN __UCLIBC_GRP_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getgrgid_r.c b/libc/pwd_grp/getgrgid_r.c index a962f4c..b0f0c9a 100644 --- a/libc/pwd_grp/getgrgid_r.c +++ b/libc/pwd_grp/getgrgid_r.c @@ -4,5 +4,10 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getgrgid_r +#define GETXXKEY_R_FUNC getgrgid_r +#define GETXXKEY_R_PARSER __parsegrent +#define GETXXKEY_R_ENTTYPE struct group +#define GETXXKEY_R_TEST(ENT) ((ENT)->gr_gid == key) +#define DO_GETXXKEY_R_KEYTYPE gid_t +#define DO_GETXXKEY_R_PATHNAME _PATH_GROUP #include "pwd_grp.c" diff --git a/libc/pwd_grp/getgrnam.c b/libc/pwd_grp/getgrnam.c index 3b47d9a..f6ce459 100644 --- a/libc/pwd_grp/getgrnam.c +++ b/libc/pwd_grp/getgrnam.c @@ -4,5 +4,9 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getgrnam +#define GETXXKEY_FUNC getgrnam +#define GETXXKEY_ENTTYPE struct group +#define GETXXKEY_ADD_PARAMS const char *name +#define GETXXKEY_ADD_VARIABLES name +#define GETXXKEY_BUFLEN __UCLIBC_GRP_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getgrnam_r.c b/libc/pwd_grp/getgrnam_r.c index 592a66c..35121e7 100644 --- a/libc/pwd_grp/getgrnam_r.c +++ b/libc/pwd_grp/getgrnam_r.c @@ -4,5 +4,10 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getgrnam_r +#define GETXXKEY_R_FUNC getgrnam_r +#define GETXXKEY_R_PARSER __parsegrent +#define GETXXKEY_R_ENTTYPE struct group +#define GETXXKEY_R_TEST(ENT) (!strcmp((ENT)->gr_name, key)) +#define DO_GETXXKEY_R_KEYTYPE const char *__restrict +#define DO_GETXXKEY_R_PATHNAME _PATH_GROUP #include "pwd_grp.c" diff --git a/libc/pwd_grp/getpwent.c b/libc/pwd_grp/getpwent.c index a617bc8..7ddc8ee 100644 --- a/libc/pwd_grp/getpwent.c +++ b/libc/pwd_grp/getpwent.c @@ -4,5 +4,8 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getpwent +#define GETXXKEY_FUNC getpwent +#define GETXXKEY_ENTTYPE struct passwd +#define GETXXKEY_ADD_PARAMS void +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getpwnam.c b/libc/pwd_grp/getpwnam.c index d00640b..e3e8c02 100644 --- a/libc/pwd_grp/getpwnam.c +++ b/libc/pwd_grp/getpwnam.c @@ -4,5 +4,10 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getpwnam +#define GETXXKEY_FUNC getpwnam +#define GETXXKEY_ENTTYPE struct passwd +#define GETXXKEY_ADD_PARAMS const char *name +#define GETXXKEY_ADD_VARIABLES name +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ +#define GETXXKEY_FUNC_HIDDEN #include "pwd_grp.c" diff --git a/libc/pwd_grp/getpwnam_r.c b/libc/pwd_grp/getpwnam_r.c index a4440e7..bc5e3d5 100644 --- a/libc/pwd_grp/getpwnam_r.c +++ b/libc/pwd_grp/getpwnam_r.c @@ -4,5 +4,10 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getpwnam_r +#define GETXXKEY_R_FUNC getpwnam_r +#define GETXXKEY_R_PARSER __parsepwent +#define GETXXKEY_R_ENTTYPE struct passwd +#define GETXXKEY_R_TEST(ENT) (!strcmp((ENT)->pw_name, key)) +#define DO_GETXXKEY_R_KEYTYPE const char *__restrict +#define DO_GETXXKEY_R_PATHNAME _PATH_PASSWD #include "pwd_grp.c" diff --git a/libc/pwd_grp/getpwuid.c b/libc/pwd_grp/getpwuid.c index 16ac50f..1ad2688 100644 --- a/libc/pwd_grp/getpwuid.c +++ b/libc/pwd_grp/getpwuid.c @@ -4,5 +4,9 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getpwuid +#define GETXXKEY_FUNC getpwuid +#define GETXXKEY_ENTTYPE struct passwd +#define GETXXKEY_ADD_PARAMS uid_t uid +#define GETXXKEY_ADD_VARIABLES uid +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getpwuid_r.c b/libc/pwd_grp/getpwuid_r.c index 21d39ed..0a5aa96 100644 --- a/libc/pwd_grp/getpwuid_r.c +++ b/libc/pwd_grp/getpwuid_r.c @@ -4,5 +4,10 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getpwuid_r +#define GETXXKEY_R_FUNC getpwuid_r +#define GETXXKEY_R_PARSER __parsepwent +#define GETXXKEY_R_ENTTYPE struct passwd +#define GETXXKEY_R_TEST(ENT) ((ENT)->pw_uid == key) +#define DO_GETXXKEY_R_KEYTYPE uid_t +#define DO_GETXXKEY_R_PATHNAME _PATH_PASSWD #include "pwd_grp.c" diff --git a/libc/pwd_grp/getspent.c b/libc/pwd_grp/getspent.c index 5699b67..4feb9f9 100644 --- a/libc/pwd_grp/getspent.c +++ b/libc/pwd_grp/getspent.c @@ -4,5 +4,8 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getspent +#define GETXXKEY_FUNC getspent +#define GETXXKEY_ENTTYPE struct spwd +#define GETXXKEY_ADD_PARAMS void +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getspnam.c b/libc/pwd_grp/getspnam.c index 19e40c7..a0a01ec 100644 --- a/libc/pwd_grp/getspnam.c +++ b/libc/pwd_grp/getspnam.c @@ -4,5 +4,9 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getspnam +#define GETXXKEY_FUNC getspnam +#define GETXXKEY_ENTTYPE struct spwd +#define GETXXKEY_ADD_PARAMS const char *name +#define GETXXKEY_ADD_VARIABLES name +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/pwd_grp/getspnam_r.c b/libc/pwd_grp/getspnam_r.c index 053b697..ea23848 100644 --- a/libc/pwd_grp/getspnam_r.c +++ b/libc/pwd_grp/getspnam_r.c @@ -4,5 +4,10 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_getspnam_r +#define GETXXKEY_R_FUNC getspnam_r +#define GETXXKEY_R_PARSER __parsespent +#define GETXXKEY_R_ENTTYPE struct spwd +#define GETXXKEY_R_TEST(ENT) (!strcmp((ENT)->sp_namp, key)) +#define DO_GETXXKEY_R_KEYTYPE const char *__restrict +#define DO_GETXXKEY_R_PATHNAME _PATH_SHADOW #include "pwd_grp.c" diff --git a/libc/pwd_grp/pwd_grp.c b/libc/pwd_grp/pwd_grp.c index 0e7c7f7..acdb08d 100644 --- a/libc/pwd_grp/pwd_grp.c +++ b/libc/pwd_grp/pwd_grp.c @@ -127,59 +127,6 @@ libc_hidden_def(fgetspent_r) #endif /**********************************************************************/ -/* For the various fget??ent funcs, return NULL on failure and a - * pointer to the appropriate struct (statically allocated) on success. - */ -/**********************************************************************/ -#ifdef L_fgetpwent - -#ifdef __USE_SVID - -struct passwd *fgetpwent(FILE *stream) -{ - static char buffer[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct passwd resultbuf; - struct passwd *result; - - fgetpwent_r(stream, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} -#endif - -#endif -/**********************************************************************/ -#ifdef L_fgetgrent - -#ifdef __USE_SVID - -struct group *fgetgrent(FILE *stream) -{ - static char buffer[__UCLIBC_GRP_BUFFER_SIZE__]; - static struct group resultbuf; - struct group *result; - - fgetgrent_r(stream, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} -#endif - -#endif -/**********************************************************************/ -#ifdef L_fgetspent - - -struct spwd *fgetspent(FILE *stream) -{ - static char buffer[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct spwd resultbuf; - struct spwd *result; - - fgetspent_r(stream, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} - -#endif -/**********************************************************************/ #ifdef L_sgetspent_r int sgetspent_r(const char *string, struct spwd *result_buf, @@ -213,92 +160,6 @@ libc_hidden_def(sgetspent_r) #endif /**********************************************************************/ - -#ifdef GETXXKEY_R_FUNC -#error GETXXKEY_R_FUNC is already defined! -#endif - -#ifdef L_getpwnam_r -#define GETXXKEY_R_FUNC getpwnam_r -#define GETXXKEY_R_PARSER __parsepwent -#define GETXXKEY_R_ENTTYPE struct passwd -#define GETXXKEY_R_TEST(ENT) (!strcmp((ENT)->pw_name, key)) -#define DO_GETXXKEY_R_KEYTYPE const char *__restrict -#define DO_GETXXKEY_R_PATHNAME _PATH_PASSWD -#include "pwd_grp_internal.c" -#endif - -#ifdef L_getgrnam_r -#define GETXXKEY_R_FUNC getgrnam_r -#define GETXXKEY_R_PARSER __parsegrent -#define GETXXKEY_R_ENTTYPE struct group -#define GETXXKEY_R_TEST(ENT) (!strcmp((ENT)->gr_name, key)) -#define DO_GETXXKEY_R_KEYTYPE const char *__restrict -#define DO_GETXXKEY_R_PATHNAME _PATH_GROUP -#include "pwd_grp_internal.c" -#endif - -#ifdef L_getspnam_r -#define GETXXKEY_R_FUNC getspnam_r -#define GETXXKEY_R_PARSER __parsespent -#define GETXXKEY_R_ENTTYPE struct spwd -#define GETXXKEY_R_TEST(ENT) (!strcmp((ENT)->sp_namp, key)) -#define DO_GETXXKEY_R_KEYTYPE const char *__restrict -#define DO_GETXXKEY_R_PATHNAME _PATH_SHADOW -#include "pwd_grp_internal.c" -#endif - -#ifdef L_getpwuid_r -#define GETXXKEY_R_FUNC getpwuid_r -#define GETXXKEY_R_PARSER __parsepwent -#define GETXXKEY_R_ENTTYPE struct passwd -#define GETXXKEY_R_TEST(ENT) ((ENT)->pw_uid == key) -#define DO_GETXXKEY_R_KEYTYPE uid_t -#define DO_GETXXKEY_R_PATHNAME _PATH_PASSWD -#include "pwd_grp_internal.c" -#endif - -#ifdef L_getgrgid_r -#define GETXXKEY_R_FUNC getgrgid_r -#define GETXXKEY_R_PARSER __parsegrent -#define GETXXKEY_R_ENTTYPE struct group -#define GETXXKEY_R_TEST(ENT) ((ENT)->gr_gid == key) -#define DO_GETXXKEY_R_KEYTYPE gid_t -#define DO_GETXXKEY_R_PATHNAME _PATH_GROUP -#include "pwd_grp_internal.c" -#endif - -/**********************************************************************/ -#ifdef L_getpwuid - - -struct passwd *getpwuid(uid_t uid) -{ - static char buffer[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct passwd resultbuf; - struct passwd *result; - - getpwuid_r(uid, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} - -#endif -/**********************************************************************/ -#ifdef L_getgrgid - - -struct group *getgrgid(gid_t gid) -{ - static char buffer[__UCLIBC_GRP_BUFFER_SIZE__]; - static struct group resultbuf; - struct group *result; - - getgrgid_r(gid, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} - -#endif -/**********************************************************************/ #ifdef L_getspuid_r /* This function is non-standard and is currently not built. It seems @@ -325,69 +186,6 @@ int getspuid_r(uid_t uid, struct spwd *__restrict resultbuf, #endif /**********************************************************************/ -#ifdef L_getspuid - -/* This function is non-standard and is currently not built. - * Why it was added, I do not know. */ - -struct spwd *getspuid(uid_t uid) -{ - static char buffer[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct spwd resultbuf; - struct spwd *result; - - getspuid_r(uid, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} - -#endif -/**********************************************************************/ -#ifdef L_getpwnam - - -struct passwd *getpwnam(const char *name) -{ - static char buffer[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct passwd resultbuf; - struct passwd *result; - - getpwnam_r(name, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} -libc_hidden_def(getpwnam) - -#endif -/**********************************************************************/ -#ifdef L_getgrnam - - -struct group *getgrnam(const char *name) -{ - static char buffer[__UCLIBC_GRP_BUFFER_SIZE__]; - static struct group resultbuf; - struct group *result; - - getgrnam_r(name, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} - -#endif -/**********************************************************************/ -#ifdef L_getspnam - - -struct spwd *getspnam(const char *name) -{ - static char buffer[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct spwd resultbuf; - struct spwd *result; - - getspnam_r(name, &resultbuf, buffer, sizeof(buffer), &result); - return result; -} - -#endif -/**********************************************************************/ #ifdef L_getpw @@ -585,65 +383,14 @@ libc_hidden_def(getspent_r) #endif /**********************************************************************/ -#ifdef L_getpwent - - -struct passwd *getpwent(void) -{ - static char line_buff[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct passwd pwd; - struct passwd *result; - - getpwent_r(&pwd, line_buff, sizeof(line_buff), &result); - return result; -} - -#endif -/**********************************************************************/ -#ifdef L_getgrent - - -struct group *getgrent(void) -{ - static char line_buff[__UCLIBC_GRP_BUFFER_SIZE__]; - static struct group gr; - struct group *result; - - getgrent_r(&gr, line_buff, sizeof(line_buff), &result); - return result; -} - -#endif +/* For the various fget??ent funcs, return NULL on failure and a + * pointer to the appropriate struct (statically allocated) on success. + */ /**********************************************************************/ -#ifdef L_getspent - - -struct spwd *getspent(void) -{ - static char line_buff[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct spwd spwd; - struct spwd *result; - - getspent_r(&spwd, line_buff, sizeof(line_buff), &result); - return result; -} - +#if defined(GETXXKEY_FUNC) || defined(GETXXKEY_R_FUNC) +#include "pwd_grp_internal.c" #endif -/**********************************************************************/ -#ifdef L_sgetspent - - -struct spwd *sgetspent(const char *string) -{ - static char line_buff[__UCLIBC_PWD_BUFFER_SIZE__]; - static struct spwd spwd; - struct spwd *result; - - sgetspent_r(string, &spwd, line_buff, sizeof(line_buff), &result); - return result; -} -#endif /**********************************************************************/ #ifdef L___getgrouplist_internal diff --git a/libc/pwd_grp/pwd_grp_internal.c b/libc/pwd_grp/pwd_grp_internal.c index d2fde11..104f532 100644 --- a/libc/pwd_grp/pwd_grp_internal.c +++ b/libc/pwd_grp/pwd_grp_internal.c @@ -36,18 +36,10 @@ #endif /**********************************************************************/ -/* Sizes for statically allocated buffers. */ - -/* If you change these values, also change _SC_GETPW_R_SIZE_MAX and - * _SC_GETGR_R_SIZE_MAX in libc/unistd/sysconf.c to match */ -#define PWD_BUFFER_SIZE 256 -#define GRP_BUFFER_SIZE 256 - -/**********************************************************************/ /* Prototypes for internal functions. */ -#ifndef GETXXKEY_R_FUNC -#error GETXXKEY_R_FUNC is not defined! +#if !defined(GETXXKEY_R_FUNC) && !defined(GETXXKEY_FUNC) +#error GETXXKEY_R_FUNC/GETXXKEY_FUNC are not defined! #endif /**********************************************************************/ #ifdef GETXXKEY_R_FUNC @@ -89,9 +81,44 @@ int GETXXKEY_R_FUNC(DO_GETXXKEY_R_KEYTYPE key, } libc_hidden_def(GETXXKEY_R_FUNC) +#endif /* GETXXKEY_R_FUNC */ + +/**********************************************************************/ +#ifdef GETXXKEY_FUNC + +#define REENTRANT_NAME APPEND_R(GETXXKEY_FUNC) +#define APPEND_R(name) APPEND_R1(name) +#define APPEND_R1(name) name##_r + +GETXXKEY_ENTTYPE *GETXXKEY_FUNC(GETXXKEY_ADD_PARAMS) +{ + static char buffer[GETXXKEY_BUFLEN]; + static GETXXKEY_ENTTYPE resultbuf; + GETXXKEY_ENTTYPE *result; + +# ifdef GETXXKEY_ADD_VARIABLES + REENTRANT_NAME(GETXXKEY_ADD_VARIABLES, &resultbuf, buffer, sizeof(buffer), &result); +# else + REENTRANT_NAME(&resultbuf, buffer, sizeof(buffer), &result); +# endif + return result; +} +#ifdef GETXXKEY_FUNC_HIDDEN +libc_hidden_def(GETXXKEY_FUNC) #endif + +#undef REENTRANT_NAME +#undef APPEND_R +#undef APPEND_R1 +#endif /* GETXXKEY_FUNC */ + /**********************************************************************/ -#undef GETXXKEY_R_FUNC_HIDDEN +#undef GETXXKEY_FUNC +#undef GETXXKEY_ENTTYPE +#undef GETXXKEY_BUFLEN +#undef GETXXKEY_FUNC_HIDDEN +#undef GETXXKEY_ADD_PARAMS +#undef GETXXKEY_ADD_VARIABLES #undef GETXXKEY_R_FUNC #undef GETXXKEY_R_PARSER #undef GETXXKEY_R_ENTTYPE diff --git a/libc/pwd_grp/sgetspent.c b/libc/pwd_grp/sgetspent.c index 877a247..990c0b6 100644 --- a/libc/pwd_grp/sgetspent.c +++ b/libc/pwd_grp/sgetspent.c @@ -4,5 +4,9 @@ * Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball. */ -#define L_sgetspent +#define GETXXKEY_FUNC sgetspent +#define GETXXKEY_ENTTYPE struct spwd +#define GETXXKEY_ADD_PARAMS const char *string +#define GETXXKEY_ADD_VARIABLES string +#define GETXXKEY_BUFLEN __UCLIBC_PWD_BUFFER_SIZE__ #include "pwd_grp.c" diff --git a/libc/string/generic/mempcpy.c b/libc/string/generic/mempcpy.c index d7fa79e..bb5563a 100644 --- a/libc/string/generic/mempcpy.c +++ b/libc/string/generic/mempcpy.c @@ -16,4 +16,5 @@ void *mempcpy (void *dstpp, const void *srcpp, size_t len) return (void *)(((char *)dstpp) + len); } libc_hidden_weak(mempcpy) +strong_alias(mempcpy,__mempcpy) #endif diff --git a/libc/string/mips/memcpy.S b/libc/string/mips/memcpy.S index 48c4f2a..2a187ef 100644 --- a/libc/string/mips/memcpy.S +++ b/libc/string/mips/memcpy.S @@ -1,6 +1,5 @@ -/* Copyright (C) 2002, 2003 Free Software Foundation, Inc. +/* Copyright (C) 2012-2015 Free Software Foundation, Inc. This file is part of the GNU C Library. - Contributed by Hartvig Ekner &lt;hartvige(a)mips.com&gt;om>, 2002. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public @@ -13,243 +12,861 @@ Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, see + License along with the GNU C Library. If not, see <http://www.gnu.org/licenses/>. */ -#include <features.h> -#include <sysdep.h> -#include <endian.h> +#ifdef ANDROID_CHANGES +# include "machine/asm.h" +# include "machine/regdef.h" +# define USE_MEMMOVE_FOR_OVERLAP +# define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD_STREAMED +# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE +#elif _LIBC +# include <sysdep.h> +# include <regdef.h> +# include <sys/asm.h> +# define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD_STREAMED +# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE +#elif defined _COMPILING_NEWLIB +# include "machine/asm.h" +# include "machine/regdef.h" +# define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD_STREAMED +# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE +#else +# include <regdef.h> +# include <sys/asm.h> +#endif + +#if (_MIPS_ISA == _MIPS_ISA_MIPS4) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64) +# ifndef DISABLE_PREFETCH +# define USE_PREFETCH +# endif +#endif + +#if defined(_MIPS_SIM) && ((_MIPS_SIM == _ABI64) || (_MIPS_SIM == _ABIN32)) +# ifndef DISABLE_DOUBLE +# define USE_DOUBLE +# endif +#endif + +/* Some asm.h files do not have the L macro definition. */ +#ifndef L +# if _MIPS_SIM == _ABIO32 +# define L(label) $L ## label +# else +# define L(label) .L ## label +# endif +#endif + +/* Some asm.h files do not have the PTR_ADDIU macro definition. */ +#ifndef PTR_ADDIU +# ifdef USE_DOUBLE +# define PTR_ADDIU daddiu +# else +# define PTR_ADDIU addiu +# endif +#endif + +/* Some asm.h files do not have the PTR_SRA macro definition. */ +#ifndef PTR_SRA +# ifdef USE_DOUBLE +# define PTR_SRA dsra +# else +# define PTR_SRA sra +# endif +#endif + +/* New R6 instructions that may not be in asm.h. */ +#ifndef PTR_LSA +# if _MIPS_SIM == _ABI64 +# define PTR_LSA dlsa +# else +# define PTR_LSA lsa +# endif +#endif + +/* + * Using PREFETCH_HINT_LOAD_STREAMED instead of PREFETCH_LOAD on load + * prefetches appears to offer a slight preformance advantage. + * + * Using PREFETCH_HINT_PREPAREFORSTORE instead of PREFETCH_STORE + * or PREFETCH_STORE_STREAMED offers a large performance advantage + * but PREPAREFORSTORE has some special restrictions to consider. + * + * Prefetch with the 'prepare for store' hint does not copy a memory + * location into the cache, it just allocates a cache line and zeros + * it out. This means that if you do not write to the entire cache + * line before writing it out to memory some data will get zero'ed out + * when the cache line is written back to memory and data will be lost. + * + * Also if you are using this memcpy to copy overlapping buffers it may + * not behave correctly when using the 'prepare for store' hint. If you + * use the 'prepare for store' prefetch on a memory area that is in the + * memcpy source (as well as the memcpy destination), then you will get + * some data zero'ed out before you have a chance to read it and data will + * be lost. + * + * If you are going to use this memcpy routine with the 'prepare for store' + * prefetch you may want to set USE_MEMMOVE_FOR_OVERLAP in order to avoid + * the problem of running memcpy on overlapping buffers. + * + * There are ifdef'ed sections of this memcpy to make sure that it does not + * do prefetches on cache lines that are not going to be completely written. + * This code is only needed and only used when PREFETCH_STORE_HINT is set to + * PREFETCH_HINT_PREPAREFORSTORE. This code assumes that cache lines are + * 32 bytes and if the cache line is larger it will not work correctly. + */ + +#ifdef USE_PREFETCH +# define PREFETCH_HINT_LOAD 0 +# define PREFETCH_HINT_STORE 1 +# define PREFETCH_HINT_LOAD_STREAMED 4 +# define PREFETCH_HINT_STORE_STREAMED 5 +# define PREFETCH_HINT_LOAD_RETAINED 6 +# define PREFETCH_HINT_STORE_RETAINED 7 +# define PREFETCH_HINT_WRITEBACK_INVAL 25 +# define PREFETCH_HINT_PREPAREFORSTORE 30 + +/* + * If we have not picked out what hints to use at this point use the + * standard load and store prefetch hints. + */ +# ifndef PREFETCH_STORE_HINT +# define PREFETCH_STORE_HINT PREFETCH_HINT_STORE +# endif +# ifndef PREFETCH_LOAD_HINT +# define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD +# endif + +/* + * We double everything when USE_DOUBLE is true so we do 2 prefetches to + * get 64 bytes in that case. The assumption is that each individual + * prefetch brings in 32 bytes. + */ + +# ifdef USE_DOUBLE +# define PREFETCH_CHUNK 64 +# define PREFETCH_FOR_LOAD(chunk, reg) \ + pref PREFETCH_LOAD_HINT, (chunk)*64(reg); \ + pref PREFETCH_LOAD_HINT, ((chunk)*64)+32(reg) +# define PREFETCH_FOR_STORE(chunk, reg) \ + pref PREFETCH_STORE_HINT, (chunk)*64(reg); \ + pref PREFETCH_STORE_HINT, ((chunk)*64)+32(reg) +# else +# define PREFETCH_CHUNK 32 +# define PREFETCH_FOR_LOAD(chunk, reg) \ + pref PREFETCH_LOAD_HINT, (chunk)*32(reg) +# define PREFETCH_FOR_STORE(chunk, reg) \ + pref PREFETCH_STORE_HINT, (chunk)*32(reg) +# endif +/* MAX_PREFETCH_SIZE is the maximum size of a prefetch, it must not be less + * than PREFETCH_CHUNK, the assumed size of each prefetch. If the real size + * of a prefetch is greater than MAX_PREFETCH_SIZE and the PREPAREFORSTORE + * hint is used, the code will not work correctly. If PREPAREFORSTORE is not + * used then MAX_PREFETCH_SIZE does not matter. */ +# define MAX_PREFETCH_SIZE 128 +/* PREFETCH_LIMIT is set based on the fact that we never use an offset greater + * than 5 on a STORE prefetch and that a single prefetch can never be larger + * than MAX_PREFETCH_SIZE. We add the extra 32 when USE_DOUBLE is set because + * we actually do two prefetches in that case, one 32 bytes after the other. */ +# ifdef USE_DOUBLE +# define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + 32 + MAX_PREFETCH_SIZE +# else +# define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + MAX_PREFETCH_SIZE +# endif +# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) \ + && ((PREFETCH_CHUNK * 4) < MAX_PREFETCH_SIZE) +/* We cannot handle this because the initial prefetches may fetch bytes that + * are before the buffer being copied. We start copies with an offset + * of 4 so avoid this situation when using PREPAREFORSTORE. */ +#error "PREFETCH_CHUNK is too large and/or MAX_PREFETCH_SIZE is too small." +# endif +#else /* USE_PREFETCH not defined */ +# define PREFETCH_FOR_LOAD(offset, reg) +# define PREFETCH_FOR_STORE(offset, reg) +#endif + +#if __mips_isa_rev > 5 +# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) +# undef PREFETCH_STORE_HINT +# define PREFETCH_STORE_HINT PREFETCH_HINT_STORE_STREAMED +# endif +# define R6_CODE +#endif -/* void *memcpy(void *s1, const void *s2, size_t n); */ +/* Allow the routine to be named something else if desired. */ +#ifndef MEMCPY_NAME +# define MEMCPY_NAME memcpy +#endif + +/* We use these 32/64 bit registers as temporaries to do the copying. */ +#define REG0 t0 +#define REG1 t1 +#define REG2 t2 +#define REG3 t3 +#if defined(_MIPS_SIM) && ((_MIPS_SIM == _ABIO32) || (_MIPS_SIM == _ABIO64)) +# define REG4 t4 +# define REG5 t5 +# define REG6 t6 +# define REG7 t7 +#else +# define REG4 ta0 +# define REG5 ta1 +# define REG6 ta2 +# define REG7 ta3 +#endif -#ifdef __mips64 +/* We load/store 64 bits at a time when USE_DOUBLE is true. + * The C_ prefix stands for CHUNK and is used to avoid macro name + * conflicts with system header files. */ -#include <sys/asm.h> +#ifdef USE_DOUBLE +# define C_ST sd +# define C_LD ld +# ifdef __MIPSEB +# define C_LDHI ldl /* high part is left in big-endian */ +# define C_STHI sdl /* high part is left in big-endian */ +# define C_LDLO ldr /* low part is right in big-endian */ +# define C_STLO sdr /* low part is right in big-endian */ +# else +# define C_LDHI ldr /* high part is right in little-endian */ +# define C_STHI sdr /* high part is right in little-endian */ +# define C_LDLO ldl /* low part is left in little-endian */ +# define C_STLO sdl /* low part is left in little-endian */ +# endif +# define C_ALIGN dalign /* r6 align instruction */ +#else +# define C_ST sw +# define C_LD lw +# ifdef __MIPSEB +# define C_LDHI lwl /* high part is left in big-endian */ +# define C_STHI swl /* high part is left in big-endian */ +# define C_LDLO lwr /* low part is right in big-endian */ +# define C_STLO swr /* low part is right in big-endian */ +# else +# define C_LDHI lwr /* high part is right in little-endian */ +# define C_STHI swr /* high part is right in little-endian */ +# define C_LDLO lwl /* low part is left in little-endian */ +# define C_STLO swl /* low part is left in little-endian */ +# endif +# define C_ALIGN align /* r6 align instruction */ +#endif -#if __BYTE_ORDER == __BIG_ENDIAN -# define LDHI ldl /* high part is left in big-endian */ -# define SDHI sdl /* high part is left in big-endian */ -# define LDLO ldr /* low part is right in big-endian */ -# define SDLO sdr /* low part is right in big-endian */ +/* Bookkeeping values for 32 vs. 64 bit mode. */ +#ifdef USE_DOUBLE +# define NSIZE 8 +# define NSIZEMASK 0x3f +# define NSIZEDMASK 0x7f #else -# define LDHI ldr /* high part is right in little-endian */ -# define SDHI sdr /* high part is right in little-endian */ -# define LDLO ldl /* low part is left in little-endian */ -# define SDLO sdl /* low part is left in little-endian */ +# define NSIZE 4 +# define NSIZEMASK 0x1f +# define NSIZEDMASK 0x3f #endif +#define UNIT(unit) ((unit)*NSIZE) +#define UNITM1(unit) (((unit)*NSIZE)-1) -ENTRY (memcpy) +#ifdef ANDROID_CHANGES +LEAF(MEMCPY_NAME, 0) +#else +LEAF(MEMCPY_NAME) +#endif + .set nomips16 .set noreorder +/* + * Below we handle the case where memcpy is called with overlapping src and dst. + * Although memcpy is not required to handle this case, some parts of Android + * like Skia rely on such usage. We call memmove to handle such cases. + */ +#ifdef USE_MEMMOVE_FOR_OVERLAP + PTR_SUBU t0,a0,a1 + PTR_SRA t2,t0,31 + xor t1,t0,t2 + PTR_SUBU t0,t1,t2 + sltu t2,t0,a2 + beq t2,zero,L(memcpy) + la t9,memmove + jr t9 + nop +L(memcpy): +#endif +/* + * If the size is less than 2*NSIZE (8 or 16), go to L(lastb). Regardless of + * size, copy dst pointer to v0 for the return value. + */ + slti t2,a2,(2 * NSIZE) + bne t2,zero,L(lasts) +#if defined(RETURN_FIRST_PREFETCH) || defined(RETURN_LAST_PREFETCH) + move v0,zero +#else + move v0,a0 +#endif - slti t0, a2, 16 # Less than 16? - bne t0, zero, L(last16) - move v0, a0 # Setup exit value before too late - - xor t0, a1, a0 # Find a0/a1 displacement - andi t0, 0x7 - bne t0, zero, L(shift) # Go handle the unaligned case - PTR_SUBU t1, zero, a1 - andi t1, 0x7 # a0/a1 are aligned, but are we - beq t1, zero, L(chk8w) # starting in the middle of a word? - PTR_SUBU a2, t1 - LDHI t0, 0(a1) # Yes we are... take care of that - PTR_ADDU a1, t1 - SDHI t0, 0(a0) - PTR_ADDU a0, t1 - -L(chk8w): - andi t0, a2, 0x3f # 64 or more bytes left? - beq t0, a2, L(chk1w) - PTR_SUBU a3, a2, t0 # Yes - PTR_ADDU a3, a1 # a3 = end address of loop - move a2, t0 # a2 = what will be left after loop -L(lop8w): - ld t0, 0(a1) # Loop taking 8 words at a time - ld t1, 8(a1) - ld t2, 16(a1) - ld t3, 24(a1) - ld ta0, 32(a1) - ld ta1, 40(a1) - ld ta2, 48(a1) - ld ta3, 56(a1) - PTR_ADDIU a0, 64 - PTR_ADDIU a1, 64 - sd t0, -64(a0) - sd t1, -56(a0) - sd t2, -48(a0) - sd t3, -40(a0) - sd ta0, -32(a0) - sd ta1, -24(a0) - sd ta2, -16(a0) - bne a1, a3, L(lop8w) - sd ta3, -8(a0) +#ifndef R6_CODE -L(chk1w): - andi t0, a2, 0x7 # 8 or more bytes left? - beq t0, a2, L(last16) - PTR_SUBU a3, a2, t0 # Yes, handle them one dword at a time - PTR_ADDU a3, a1 # a3 again end address - move a2, t0 -L(lop1w): - ld t0, 0(a1) - PTR_ADDIU a0, 8 - PTR_ADDIU a1, 8 - bne a1, a3, L(lop1w) - sd t0, -8(a0) - -L(last16): - blez a2, L(lst16e) # Handle last 16 bytes, one at a time - PTR_ADDU a3, a2, a1 -L(lst16l): - lb t0, 0(a1) - PTR_ADDIU a0, 1 - PTR_ADDIU a1, 1 - bne a1, a3, L(lst16l) - sb t0, -1(a0) -L(lst16e): - jr ra # Bye, bye - nop +/* + * If src and dst have different alignments, go to L(unaligned), if they + * have the same alignment (but are not actually aligned) do a partial + * load/store to make them aligned. If they are both already aligned + * we can start copying at L(aligned). + */ + xor t8,a1,a0 + andi t8,t8,(NSIZE-1) /* t8 is a0/a1 word-displacement */ + bne t8,zero,L(unaligned) + PTR_SUBU a3, zero, a0 -L(shift): - PTR_SUBU a3, zero, a0 # Src and Dest unaligned - andi a3, 0x7 # (unoptimized case...) - beq a3, zero, L(shft1) - PTR_SUBU a2, a3 # a2 = bytes left - LDHI t0, 0(a1) # Take care of first odd part - LDLO t0, 7(a1) - PTR_ADDU a1, a3 - SDHI t0, 0(a0) - PTR_ADDU a0, a3 -L(shft1): - andi t0, a2, 0x7 - PTR_SUBU a3, a2, t0 - PTR_ADDU a3, a1 -L(shfth): - LDHI t1, 0(a1) # Limp through, dword by dword - LDLO t1, 7(a1) - PTR_ADDIU a0, 8 - PTR_ADDIU a1, 8 - bne a1, a3, L(shfth) - sd t1, -8(a0) - b L(last16) # Handle anything which may be left - move a2, t0 + andi a3,a3,(NSIZE-1) /* copy a3 bytes to align a0/a1 */ + beq a3,zero,L(aligned) /* if a3=0, it is already aligned */ + PTR_SUBU a2,a2,a3 /* a2 is the remining bytes count */ - .set reorder -END (memcpy) + C_LDHI t8,0(a1) + PTR_ADDU a1,a1,a3 + C_STHI t8,0(a0) + PTR_ADDU a0,a0,a3 + +#else /* R6_CODE */ + +/* + * Align the destination and hope that the source gets aligned too. If it + * doesn't we jump to L(r6_unaligned*) to do unaligned copies using the r6 + * align instruction. + */ + andi t8,a0,7 + lapc t9,L(atable) + PTR_LSA t9,t8,t9,2 + jrc t9 +L(atable): + bc L(lb0) + bc L(lb7) + bc L(lb6) + bc L(lb5) + bc L(lb4) + bc L(lb3) + bc L(lb2) + bc L(lb1) +L(lb7): + lb a3, 6(a1) + sb a3, 6(a0) +L(lb6): + lb a3, 5(a1) + sb a3, 5(a0) +L(lb5): + lb a3, 4(a1) + sb a3, 4(a0) +L(lb4): + lb a3, 3(a1) + sb a3, 3(a0) +L(lb3): + lb a3, 2(a1) + sb a3, 2(a0) +L(lb2): + lb a3, 1(a1) + sb a3, 1(a0) +L(lb1): + lb a3, 0(a1) + sb a3, 0(a0) + + li t9,8 + subu t8,t9,t8 + PTR_SUBU a2,a2,t8 + PTR_ADDU a0,a0,t8 + PTR_ADDU a1,a1,t8 +L(lb0): -#else /* !__mips64 */ + andi t8,a1,(NSIZE-1) + lapc t9,L(jtable) + PTR_LSA t9,t8,t9,2 + jrc t9 +L(jtable): + bc L(aligned) + bc L(r6_unaligned1) + bc L(r6_unaligned2) + bc L(r6_unaligned3) +# ifdef USE_DOUBLE + bc L(r6_unaligned4) + bc L(r6_unaligned5) + bc L(r6_unaligned6) + bc L(r6_unaligned7) +# endif +#endif /* R6_CODE */ -#if __BYTE_ORDER == __BIG_ENDIAN -# define LWHI lwl /* high part is left in big-endian */ -# define SWHI swl /* high part is left in big-endian */ -# define LWLO lwr /* low part is right in big-endian */ -# define SWLO swr /* low part is right in big-endian */ +L(aligned): + +/* + * Now dst/src are both aligned to (word or double word) aligned addresses + * Set a2 to count how many bytes we have to copy after all the 64/128 byte + * chunks are copied and a3 to the dst pointer after all the 64/128 byte + * chunks have been copied. We will loop, incrementing a0 and a1 until a0 + * equals a3. + */ + + andi t8,a2,NSIZEDMASK /* any whole 64-byte/128-byte chunks? */ + beq a2,t8,L(chkw) /* if a2==t8, no 64-byte/128-byte chunks */ + PTR_SUBU a3,a2,t8 /* subtract from a2 the reminder */ + PTR_ADDU a3,a0,a3 /* Now a3 is the final dst after loop */ + +/* When in the loop we may prefetch with the 'prepare to store' hint, + * in this case the a0+x should not be past the "t0-32" address. This + * means: for x=128 the last "safe" a0 address is "t0-160". Alternatively, + * for x=64 the last "safe" a0 address is "t0-96" In the current version we + * will use "prefetch hint,128(a0)", so "t0-160" is the limit. + */ +#if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) + PTR_ADDU t0,a0,a2 /* t0 is the "past the end" address */ + PTR_SUBU t9,t0,PREFETCH_LIMIT /* t9 is the "last safe pref" address */ +#endif + PREFETCH_FOR_LOAD (0, a1) + PREFETCH_FOR_LOAD (1, a1) + PREFETCH_FOR_LOAD (2, a1) + PREFETCH_FOR_LOAD (3, a1) +#if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE) + PREFETCH_FOR_STORE (1, a0) + PREFETCH_FOR_STORE (2, a0) + PREFETCH_FOR_STORE (3, a0) +#endif +#if defined(RETURN_FIRST_PREFETCH) && defined(USE_PREFETCH) +# if PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE + sltu v1,t9,a0 + bgtz v1,L(skip_set) + nop + PTR_ADDIU v0,a0,(PREFETCH_CHUNK*4) +L(skip_set): +# else + PTR_ADDIU v0,a0,(PREFETCH_CHUNK*1) +# endif +#endif +#if defined(RETURN_LAST_PREFETCH) && defined(USE_PREFETCH) \ + && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE) + PTR_ADDIU v0,a0,(PREFETCH_CHUNK*3) +# ifdef USE_DOUBLE + PTR_ADDIU v0,v0,32 +# endif +#endif +L(loop16w): + C_LD t0,UNIT(0)(a1) +#if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) + sltu v1,t9,a0 /* If a0 > t9 don't use next prefetch */ + bgtz v1,L(skip_pref) +#endif + C_LD t1,UNIT(1)(a1) +#ifdef R6_CODE + PREFETCH_FOR_STORE (2, a0) #else -# define LWHI lwr /* high part is right in little-endian */ -# define SWHI swr /* high part is right in little-endian */ -# define LWLO lwl /* low part is left in little-endian */ -# define SWLO swl /* low part is left in little-endian */ + PREFETCH_FOR_STORE (4, a0) + PREFETCH_FOR_STORE (5, a0) +#endif +#if defined(RETURN_LAST_PREFETCH) && defined(USE_PREFETCH) + PTR_ADDIU v0,a0,(PREFETCH_CHUNK*5) +# ifdef USE_DOUBLE + PTR_ADDIU v0,v0,32 +# endif #endif +L(skip_pref): + C_LD REG2,UNIT(2)(a1) + C_LD REG3,UNIT(3)(a1) + C_LD REG4,UNIT(4)(a1) + C_LD REG5,UNIT(5)(a1) + C_LD REG6,UNIT(6)(a1) + C_LD REG7,UNIT(7)(a1) +#ifdef R6_CODE + PREFETCH_FOR_LOAD (3, a1) +#else + PREFETCH_FOR_LOAD (4, a1) +#endif + C_ST t0,UNIT(0)(a0) + C_ST t1,UNIT(1)(a0) + C_ST REG2,UNIT(2)(a0) + C_ST REG3,UNIT(3)(a0) + C_ST REG4,UNIT(4)(a0) + C_ST REG5,UNIT(5)(a0) + C_ST REG6,UNIT(6)(a0) + C_ST REG7,UNIT(7)(a0) -ENTRY (memcpy) - .set noreorder + C_LD t0,UNIT(8)(a1) + C_LD t1,UNIT(9)(a1) + C_LD REG2,UNIT(10)(a1) + C_LD REG3,UNIT(11)(a1) + C_LD REG4,UNIT(12)(a1) + C_LD REG5,UNIT(13)(a1) + C_LD REG6,UNIT(14)(a1) + C_LD REG7,UNIT(15)(a1) +#ifndef R6_CODE + PREFETCH_FOR_LOAD (5, a1) +#endif + C_ST t0,UNIT(8)(a0) + C_ST t1,UNIT(9)(a0) + C_ST REG2,UNIT(10)(a0) + C_ST REG3,UNIT(11)(a0) + C_ST REG4,UNIT(12)(a0) + C_ST REG5,UNIT(13)(a0) + C_ST REG6,UNIT(14)(a0) + C_ST REG7,UNIT(15)(a0) + PTR_ADDIU a0,a0,UNIT(16) /* adding 64/128 to dest */ + bne a0,a3,L(loop16w) + PTR_ADDIU a1,a1,UNIT(16) /* adding 64/128 to src */ + move a2,t8 + +/* Here we have src and dest word-aligned but less than 64-bytes or + * 128 bytes to go. Check for a 32(64) byte chunk and copy if if there + * is one. Otherwise jump down to L(chk1w) to handle the tail end of + * the copy. + */ + +L(chkw): + PREFETCH_FOR_LOAD (0, a1) + andi t8,a2,NSIZEMASK /* Is there a 32-byte/64-byte chunk. */ + /* The t8 is the reminder count past 32-bytes */ + beq a2,t8,L(chk1w) /* When a2=t8, no 32-byte chunk */ + nop + C_LD t0,UNIT(0)(a1) + C_LD t1,UNIT(1)(a1) + C_LD REG2,UNIT(2)(a1) + C_LD REG3,UNIT(3)(a1) + C_LD REG4,UNIT(4)(a1) + C_LD REG5,UNIT(5)(a1) + C_LD REG6,UNIT(6)(a1) + C_LD REG7,UNIT(7)(a1) + PTR_ADDIU a1,a1,UNIT(8) + C_ST t0,UNIT(0)(a0) + C_ST t1,UNIT(1)(a0) + C_ST REG2,UNIT(2)(a0) + C_ST REG3,UNIT(3)(a0) + C_ST REG4,UNIT(4)(a0) + C_ST REG5,UNIT(5)(a0) + C_ST REG6,UNIT(6)(a0) + C_ST REG7,UNIT(7)(a0) + PTR_ADDIU a0,a0,UNIT(8) + +/* + * Here we have less than 32(64) bytes to copy. Set up for a loop to + * copy one word (or double word) at a time. Set a2 to count how many + * bytes we have to copy after all the word (or double word) chunks are + * copied and a3 to the dst pointer after all the (d)word chunks have + * been copied. We will loop, incrementing a0 and a1 until a0 equals a3. + */ +L(chk1w): + andi a2,t8,(NSIZE-1) /* a2 is the reminder past one (d)word chunks */ + beq a2,t8,L(lastw) + PTR_SUBU a3,t8,a2 /* a3 is count of bytes in one (d)word chunks */ + PTR_ADDU a3,a0,a3 /* a3 is the dst address after loop */ - slti t0, a2, 8 # Less than 8? - bne t0, zero, L(last8) - move v0, a0 # Setup exit value before too late - - xor t0, a1, a0 # Find a0/a1 displacement - andi t0, 0x3 - bne t0, zero, L(shift) # Go handle the unaligned case - subu t1, zero, a1 - andi t1, 0x3 # a0/a1 are aligned, but are we - beq t1, zero, L(chk8w) # starting in the middle of a word? - subu a2, t1 - LWHI t0, 0(a1) # Yes we are... take care of that - addu a1, t1 - SWHI t0, 0(a0) - addu a0, t1 - -L(chk8w): - andi t0, a2, 0x1f # 32 or more bytes left? - beq t0, a2, L(chk1w) - subu a3, a2, t0 # Yes - addu a3, a1 # a3 = end address of loop - move a2, t0 # a2 = what will be left after loop -L(lop8w): - lw t0, 0(a1) # Loop taking 8 words at a time - lw t1, 4(a1) - lw t2, 8(a1) - lw t3, 12(a1) - lw t4, 16(a1) - lw t5, 20(a1) - lw t6, 24(a1) - lw t7, 28(a1) - addiu a0, 32 - addiu a1, 32 - sw t0, -32(a0) - sw t1, -28(a0) - sw t2, -24(a0) - sw t3, -20(a0) - sw t4, -16(a0) - sw t5, -12(a0) - sw t6, -8(a0) - bne a1, a3, L(lop8w) - sw t7, -4(a0) - -L(chk1w): - andi t0, a2, 0x3 # 4 or more bytes left? - beq t0, a2, L(last8) - subu a3, a2, t0 # Yes, handle them one word at a time - addu a3, a1 # a3 again end address - move a2, t0 -L(lop1w): - lw t0, 0(a1) - addiu a0, 4 - addiu a1, 4 - bne a1, a3, L(lop1w) - sw t0, -4(a0) - -L(last8): - blez a2, L(lst8e) # Handle last 8 bytes, one at a time - addu a3, a2, a1 -L(lst8l): - lb t0, 0(a1) - addiu a0, 1 - addiu a1, 1 - bne a1, a3, L(lst8l) - sb t0, -1(a0) -L(lst8e): - jr ra # Bye, bye +/* copying in words (4-byte or 8-byte chunks) */ +L(wordCopy_loop): + C_LD REG3,UNIT(0)(a1) + PTR_ADDIU a0,a0,UNIT(1) + PTR_ADDIU a1,a1,UNIT(1) + bne a0,a3,L(wordCopy_loop) + C_ST REG3,UNIT(-1)(a0) + +/* If we have been copying double words, see if we can copy a single word + before doing byte copies. We can have, at most, one word to copy. */ + +L(lastw): +#ifdef USE_DOUBLE + andi t8,a2,3 /* a2 is the remainder past 4 byte chunks. */ + beq t8,a2,L(lastb) + lw REG3,0(a1) + sw REG3,0(a0) + PTR_ADDIU a0,a0,4 + PTR_ADDIU a1,a1,4 + move a2,t8 +#endif + +/* Copy the last 8 (or 16) bytes */ +L(lastb): + blez a2,L(leave) + PTR_ADDU a3,a0,a2 /* a3 is the last dst address */ +L(lastbloop): + lb v1,0(a1) + PTR_ADDIU a0,a0,1 + PTR_ADDIU a1,a1,1 + bne a0,a3,L(lastbloop) + sb v1,-1(a0) +L(leave): + j ra nop -L(shift): - subu a3, zero, a0 # Src and Dest unaligned - andi a3, 0x3 # (unoptimized case...) - beq a3, zero, L(shft1) - subu a2, a3 # a2 = bytes left - LWHI t0, 0(a1) # Take care of first odd part - LWLO t0, 3(a1) - addu a1, a3 - SWHI t0, 0(a0) - addu a0, a3 -L(shft1): - andi t0, a2, 0x3 - subu a3, a2, t0 - addu a3, a1 -L(shfth): - LWHI t1, 0(a1) # Limp through, word by word - LWLO t1, 3(a1) - addiu a0, 4 - addiu a1, 4 - bne a1, a3, L(shfth) - sw t1, -4(a0) - b L(last8) # Handle anything which may be left - move a2, t0 +/* We jump here with a memcpy of less than 8 or 16 bytes, depending on + whether or not USE_DOUBLE is defined. Instead of just doing byte + copies, check the alignment and size and use lw/sw if possible. + Otherwise, do byte copies. */ - .set reorder -END (memcpy) +L(lasts): + andi t8,a2,3 + beq t8,a2,L(lastb) + + andi t9,a0,3 + bne t9,zero,L(lastb) + andi t9,a1,3 + bne t9,zero,L(lastb) + + PTR_SUBU a3,a2,t8 + PTR_ADDU a3,a0,a3 + +L(wcopy_loop): + lw REG3,0(a1) + PTR_ADDIU a0,a0,4 + PTR_ADDIU a1,a1,4 + bne a0,a3,L(wcopy_loop) + sw REG3,-4(a0) -#endif /* !__mips64 */ + b L(lastb) + move a2,t8 -libc_hidden_def(memcpy) +#ifndef R6_CODE +/* + * UNALIGNED case, got here with a3 = "negu a0" + * This code is nearly identical to the aligned code above + * but only the destination (not the source) gets aligned + * so we need to do partial loads of the source followed + * by normal stores to the destination (once we have aligned + * the destination). + */ + +L(unaligned): + andi a3,a3,(NSIZE-1) /* copy a3 bytes to align a0/a1 */ + beqz a3,L(ua_chk16w) /* if a3=0, it is already aligned */ + PTR_SUBU a2,a2,a3 /* a2 is the remining bytes count */ + + C_LDHI v1,UNIT(0)(a1) + C_LDLO v1,UNITM1(1)(a1) + PTR_ADDU a1,a1,a3 + C_STHI v1,UNIT(0)(a0) + PTR_ADDU a0,a0,a3 + +/* + * Now the destination (but not the source) is aligned + * Set a2 to count how many bytes we have to copy after all the 64/128 byte + * chunks are copied and a3 to the dst pointer after all the 64/128 byte + * chunks have been copied. We will loop, incrementing a0 and a1 until a0 + * equals a3. + */ + +L(ua_chk16w): + andi t8,a2,NSIZEDMASK /* any whole 64-byte/128-byte chunks? */ + beq a2,t8,L(ua_chkw) /* if a2==t8, no 64-byte/128-byte chunks */ + PTR_SUBU a3,a2,t8 /* subtract from a2 the reminder */ + PTR_ADDU a3,a0,a3 /* Now a3 is the final dst after loop */ + +# if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) + PTR_ADDU t0,a0,a2 /* t0 is the "past the end" address */ + PTR_SUBU t9,t0,PREFETCH_LIMIT /* t9 is the "last safe pref" address */ +# endif + PREFETCH_FOR_LOAD (0, a1) + PREFETCH_FOR_LOAD (1, a1) + PREFETCH_FOR_LOAD (2, a1) +# if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE) + PREFETCH_FOR_STORE (1, a0) + PREFETCH_FOR_STORE (2, a0) + PREFETCH_FOR_STORE (3, a0) +# endif +# if defined(RETURN_FIRST_PREFETCH) && defined(USE_PREFETCH) +# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) + sltu v1,t9,a0 + bgtz v1,L(ua_skip_set) + nop + PTR_ADDIU v0,a0,(PREFETCH_CHUNK*4) +L(ua_skip_set): +# else + PTR_ADDIU v0,a0,(PREFETCH_CHUNK*1) +# endif +# endif +L(ua_loop16w): + PREFETCH_FOR_LOAD (3, a1) + C_LDHI t0,UNIT(0)(a1) + C_LDHI t1,UNIT(1)(a1) + C_LDHI REG2,UNIT(2)(a1) +# if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) + sltu v1,t9,a0 + bgtz v1,L(ua_skip_pref) +# endif + C_LDHI REG3,UNIT(3)(a1) + PREFETCH_FOR_STORE (4, a0) + PREFETCH_FOR_STORE (5, a0) +L(ua_skip_pref): + C_LDHI REG4,UNIT(4)(a1) + C_LDHI REG5,UNIT(5)(a1) + C_LDHI REG6,UNIT(6)(a1) + C_LDHI REG7,UNIT(7)(a1) + C_LDLO t0,UNITM1(1)(a1) + C_LDLO t1,UNITM1(2)(a1) + C_LDLO REG2,UNITM1(3)(a1) + C_LDLO REG3,UNITM1(4)(a1) + C_LDLO REG4,UNITM1(5)(a1) + C_LDLO REG5,UNITM1(6)(a1) + C_LDLO REG6,UNITM1(7)(a1) + C_LDLO REG7,UNITM1(8)(a1) + PREFETCH_FOR_LOAD (4, a1) + C_ST t0,UNIT(0)(a0) + C_ST t1,UNIT(1)(a0) + C_ST REG2,UNIT(2)(a0) + C_ST REG3,UNIT(3)(a0) + C_ST REG4,UNIT(4)(a0) + C_ST REG5,UNIT(5)(a0) + C_ST REG6,UNIT(6)(a0) + C_ST REG7,UNIT(7)(a0) + C_LDHI t0,UNIT(8)(a1) + C_LDHI t1,UNIT(9)(a1) + C_LDHI REG2,UNIT(10)(a1) + C_LDHI REG3,UNIT(11)(a1) + C_LDHI REG4,UNIT(12)(a1) + C_LDHI REG5,UNIT(13)(a1) + C_LDHI REG6,UNIT(14)(a1) + C_LDHI REG7,UNIT(15)(a1) + C_LDLO t0,UNITM1(9)(a1) + C_LDLO t1,UNITM1(10)(a1) + C_LDLO REG2,UNITM1(11)(a1) + C_LDLO REG3,UNITM1(12)(a1) + C_LDLO REG4,UNITM1(13)(a1) + C_LDLO REG5,UNITM1(14)(a1) + C_LDLO REG6,UNITM1(15)(a1) + C_LDLO REG7,UNITM1(16)(a1) + PREFETCH_FOR_LOAD (5, a1) + C_ST t0,UNIT(8)(a0) + C_ST t1,UNIT(9)(a0) + C_ST REG2,UNIT(10)(a0) + C_ST REG3,UNIT(11)(a0) + C_ST REG4,UNIT(12)(a0) + C_ST REG5,UNIT(13)(a0) + C_ST REG6,UNIT(14)(a0) + C_ST REG7,UNIT(15)(a0) + PTR_ADDIU a0,a0,UNIT(16) /* adding 64/128 to dest */ + bne a0,a3,L(ua_loop16w) + PTR_ADDIU a1,a1,UNIT(16) /* adding 64/128 to src */ + move a2,t8 + +/* Here we have src and dest word-aligned but less than 64-bytes or + * 128 bytes to go. Check for a 32(64) byte chunk and copy if if there + * is one. Otherwise jump down to L(ua_chk1w) to handle the tail end of + * the copy. */ + +L(ua_chkw): + PREFETCH_FOR_LOAD (0, a1) + andi t8,a2,NSIZEMASK /* Is there a 32-byte/64-byte chunk. */ + /* t8 is the reminder count past 32-bytes */ + beq a2,t8,L(ua_chk1w) /* When a2=t8, no 32-byte chunk */ + nop + C_LDHI t0,UNIT(0)(a1) + C_LDHI t1,UNIT(1)(a1) + C_LDHI REG2,UNIT(2)(a1) + C_LDHI REG3,UNIT(3)(a1) + C_LDHI REG4,UNIT(4)(a1) + C_LDHI REG5,UNIT(5)(a1) + C_LDHI REG6,UNIT(6)(a1) + C_LDHI REG7,UNIT(7)(a1) + C_LDLO t0,UNITM1(1)(a1) + C_LDLO t1,UNITM1(2)(a1) + C_LDLO REG2,UNITM1(3)(a1) + C_LDLO REG3,UNITM1(4)(a1) + C_LDLO REG4,UNITM1(5)(a1) + C_LDLO REG5,UNITM1(6)(a1) + C_LDLO REG6,UNITM1(7)(a1) + C_LDLO REG7,UNITM1(8)(a1) + PTR_ADDIU a1,a1,UNIT(8) + C_ST t0,UNIT(0)(a0) + C_ST t1,UNIT(1)(a0) + C_ST REG2,UNIT(2)(a0) + C_ST REG3,UNIT(3)(a0) + C_ST REG4,UNIT(4)(a0) + C_ST REG5,UNIT(5)(a0) + C_ST REG6,UNIT(6)(a0) + C_ST REG7,UNIT(7)(a0) + PTR_ADDIU a0,a0,UNIT(8) +/* + * Here we have less than 32(64) bytes to copy. Set up for a loop to + * copy one word (or double word) at a time. + */ +L(ua_chk1w): + andi a2,t8,(NSIZE-1) /* a2 is the reminder past one (d)word chunks */ + beq a2,t8,L(ua_smallCopy) + PTR_SUBU a3,t8,a2 /* a3 is count of bytes in one (d)word chunks */ + PTR_ADDU a3,a0,a3 /* a3 is the dst address after loop */ + +/* copying in words (4-byte or 8-byte chunks) */ +L(ua_wordCopy_loop): + C_LDHI v1,UNIT(0)(a1) + C_LDLO v1,UNITM1(1)(a1) + PTR_ADDIU a0,a0,UNIT(1) + PTR_ADDIU a1,a1,UNIT(1) + bne a0,a3,L(ua_wordCopy_loop) + C_ST v1,UNIT(-1)(a0) + +/* Copy the last 8 (or 16) bytes */ +L(ua_smallCopy): + beqz a2,L(leave) + PTR_ADDU a3,a0,a2 /* a3 is the last dst address */ +L(ua_smallCopy_loop): + lb v1,0(a1) + PTR_ADDIU a0,a0,1 + PTR_ADDIU a1,a1,1 + bne a0,a3,L(ua_smallCopy_loop) + sb v1,-1(a0) + + j ra + nop + +#else /* R6_CODE */ + +# ifdef __MIPSEB +# define SWAP_REGS(X,Y) X, Y +# define ALIGN_OFFSET(N) (N) +# else +# define SWAP_REGS(X,Y) Y, X +# define ALIGN_OFFSET(N) (NSIZE-N) +# endif +# define R6_UNALIGNED_WORD_COPY(BYTEOFFSET) \ + andi REG7, a2, (NSIZE-1);/* REG7 is # of bytes to by bytes. */ \ + beq REG7, a2, L(lastb); /* Check for bytes to copy by word */ \ + PTR_SUBU a3, a2, REG7; /* a3 is number of bytes to be copied in */ \ + /* (d)word chunks. */ \ + move a2, REG7; /* a2 is # of bytes to copy byte by byte */ \ + /* after word loop is finished. */ \ + PTR_ADDU REG6, a0, a3; /* REG6 is the dst address after loop. */ \ + PTR_SUBU REG2, a1, t8; /* REG2 is the aligned src address. */ \ + PTR_ADDU a1, a1, a3; /* a1 is addr of source after word loop. */ \ + C_LD t0, UNIT(0)(REG2); /* Load first part of source. */ \ +L(r6_ua_wordcopy##BYTEOFFSET): \ + C_LD t1, UNIT(1)(REG2); /* Load second part of source. */ \ + C_ALIGN REG3, SWAP_REGS(t1,t0), ALIGN_OFFSET(BYTEOFFSET); \ + PTR_ADDIU a0, a0, UNIT(1); /* Increment destination pointer. */ \ + PTR_ADDIU REG2, REG2, UNIT(1); /* Increment aligned source pointer.*/ \ + move t0, t1; /* Move second part of source to first. */ \ + bne a0, REG6,L(r6_ua_wordcopy##BYTEOFFSET); \ + C_ST REG3, UNIT(-1)(a0); \ + j L(lastb); \ + nop + + /* We are generating R6 code, the destination is 4 byte aligned and + the source is not 4 byte aligned. t8 is 1, 2, or 3 depending on the + alignment of the source. */ + +L(r6_unaligned1): + R6_UNALIGNED_WORD_COPY(1) +L(r6_unaligned2): + R6_UNALIGNED_WORD_COPY(2) +L(r6_unaligned3): + R6_UNALIGNED_WORD_COPY(3) +# ifdef USE_DOUBLE +L(r6_unaligned4): + R6_UNALIGNED_WORD_COPY(4) +L(r6_unaligned5): + R6_UNALIGNED_WORD_COPY(5) +L(r6_unaligned6): + R6_UNALIGNED_WORD_COPY(6) +L(r6_unaligned7): + R6_UNALIGNED_WORD_COPY(7) +# endif +#endif /* R6_CODE */ + + .set at + .set reorder +END(MEMCPY_NAME) +#ifndef ANDROID_CHANGES +# ifdef _LIBC +# ifdef __UCLIBC__ +libc_hidden_def(MEMCPY_NAME) +# else +libc_hidden_builtin_def (MEMCPY_NAME) +# endif +# endif +#endif diff --git a/libc/string/mips/memset.S b/libc/string/mips/memset.S index 26b2598..ef8ab0b 100644 --- a/libc/string/mips/memset.S +++ b/libc/string/mips/memset.S @@ -1,6 +1,5 @@ -/* Copyright (C) 2002, 2003 Free Software Foundation, Inc. +/* Copyright (C) 2013-2015 Free Software Foundation, Inc. This file is part of the GNU C Library. - Contributed by Hartvig Ekner &lt;hartvige(a)mips.com&gt;om>, 2002. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public @@ -13,145 +12,420 @@ Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, see + License along with the GNU C Library. If not, see <http://www.gnu.org/licenses/>. */ -#include <features.h> -#include <sysdep.h> -#include <endian.h> +#ifdef ANDROID_CHANGES +# include "machine/asm.h" +# include "machine/regdef.h" +# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE +#elif _LIBC +# include <sysdep.h> +# include <regdef.h> +# include <sys/asm.h> +# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE +#elif defined _COMPILING_NEWLIB +# include "machine/asm.h" +# include "machine/regdef.h" +# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE +#else +# include <regdef.h> +# include <sys/asm.h> +#endif + +/* Check to see if the MIPS architecture we are compiling for supports + prefetching. */ + +#if (__mips == 4) || (__mips == 5) || (__mips == 32) || (__mips == 64) +# ifndef DISABLE_PREFETCH +# define USE_PREFETCH +# endif +#endif + +#if defined(_MIPS_SIM) && ((_MIPS_SIM == _ABI64) || (_MIPS_SIM == _ABIN32)) +# ifndef DISABLE_DOUBLE +# define USE_DOUBLE +# endif +#endif + +#ifndef USE_DOUBLE +# ifndef DISABLE_DOUBLE_ALIGN +# define DOUBLE_ALIGN +# endif +#endif + + +/* Some asm.h files do not have the L macro definition. */ +#ifndef L +# if _MIPS_SIM == _ABIO32 +# define L(label) $L ## label +# else +# define L(label) .L ## label +# endif +#endif + +/* Some asm.h files do not have the PTR_ADDIU macro definition. */ +#ifndef PTR_ADDIU +# ifdef USE_DOUBLE +# define PTR_ADDIU daddiu +# else +# define PTR_ADDIU addiu +# endif +#endif -/* void *memset(void *s, int c, size_t n). */ +/* New R6 instructions that may not be in asm.h. */ +#ifndef PTR_LSA +# if _MIPS_SIM == _ABI64 +# define PTR_LSA dlsa +# else +# define PTR_LSA lsa +# endif +#endif + +/* Using PREFETCH_HINT_PREPAREFORSTORE instead of PREFETCH_STORE + or PREFETCH_STORE_STREAMED offers a large performance advantage + but PREPAREFORSTORE has some special restrictions to consider. + + Prefetch with the 'prepare for store' hint does not copy a memory + location into the cache, it just allocates a cache line and zeros + it out. This means that if you do not write to the entire cache + line before writing it out to memory some data will get zero'ed out + when the cache line is written back to memory and data will be lost. + + There are ifdef'ed sections of this memcpy to make sure that it does not + do prefetches on cache lines that are not going to be completely written. + This code is only needed and only used when PREFETCH_STORE_HINT is set to + PREFETCH_HINT_PREPAREFORSTORE. This code assumes that cache lines are + less than MAX_PREFETCH_SIZE bytes and if the cache line is larger it will + not work correctly. */ + +#ifdef USE_PREFETCH +# define PREFETCH_HINT_STORE 1 +# define PREFETCH_HINT_STORE_STREAMED 5 +# define PREFETCH_HINT_STORE_RETAINED 7 +# define PREFETCH_HINT_PREPAREFORSTORE 30 + +/* If we have not picked out what hints to use at this point use the + standard load and store prefetch hints. */ +# ifndef PREFETCH_STORE_HINT +# define PREFETCH_STORE_HINT PREFETCH_HINT_STORE +# endif + +/* We double everything when USE_DOUBLE is true so we do 2 prefetches to + get 64 bytes in that case. The assumption is that each individual + prefetch brings in 32 bytes. */ +# ifdef USE_DOUBLE +# define PREFETCH_CHUNK 64 +# define PREFETCH_FOR_STORE(chunk, reg) \ + pref PREFETCH_STORE_HINT, (chunk)*64(reg); \ + pref PREFETCH_STORE_HINT, ((chunk)*64)+32(reg) +# else +# define PREFETCH_CHUNK 32 +# define PREFETCH_FOR_STORE(chunk, reg) \ + pref PREFETCH_STORE_HINT, (chunk)*32(reg) +# endif -#ifdef __mips64 +/* MAX_PREFETCH_SIZE is the maximum size of a prefetch, it must not be less + than PREFETCH_CHUNK, the assumed size of each prefetch. If the real size + of a prefetch is greater than MAX_PREFETCH_SIZE and the PREPAREFORSTORE + hint is used, the code will not work correctly. If PREPAREFORSTORE is not + used than MAX_PREFETCH_SIZE does not matter. */ +# define MAX_PREFETCH_SIZE 128 +/* PREFETCH_LIMIT is set based on the fact that we never use an offset greater + than 5 on a STORE prefetch and that a single prefetch can never be larger + than MAX_PREFETCH_SIZE. We add the extra 32 when USE_DOUBLE is set because + we actually do two prefetches in that case, one 32 bytes after the other. */ +# ifdef USE_DOUBLE +# define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + 32 + MAX_PREFETCH_SIZE +# else +# define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + MAX_PREFETCH_SIZE +# endif -#include <sys/asm.h> +# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) \ + && ((PREFETCH_CHUNK * 4) < MAX_PREFETCH_SIZE) +/* We cannot handle this because the initial prefetches may fetch bytes that + are before the buffer being copied. We start copies with an offset + of 4 so avoid this situation when using PREPAREFORSTORE. */ +# error "PREFETCH_CHUNK is too large and/or MAX_PREFETCH_SIZE is too small." +# endif +#else /* USE_PREFETCH not defined */ +# define PREFETCH_FOR_STORE(offset, reg) +#endif + +#if __mips_isa_rev > 5 +# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) +# undef PREFETCH_STORE_HINT +# define PREFETCH_STORE_HINT PREFETCH_HINT_STORE_STREAMED +# endif +# define R6_CODE +#endif -#if __BYTE_ORDER == __BIG_ENDIAN -# define SDHI sdl /* high part is left in big-endian */ +/* Allow the routine to be named something else if desired. */ +#ifndef MEMSET_NAME +# define MEMSET_NAME memset +#endif + +/* We load/store 64 bits at a time when USE_DOUBLE is true. + The C_ prefix stands for CHUNK and is used to avoid macro name + conflicts with system header files. */ + +#ifdef USE_DOUBLE +# define C_ST sd +# ifdef __MIPSEB +# define C_STHI sdl /* high part is left in big-endian */ +# else +# define C_STHI sdr /* high part is right in little-endian */ +# endif #else -# define SDHI sdr /* high part is right in little-endian */ +# define C_ST sw +# ifdef __MIPSEB +# define C_STHI swl /* high part is left in big-endian */ +# else +# define C_STHI swr /* high part is right in little-endian */ +# endif #endif -ENTRY (memset) - .set noreorder +/* Bookkeeping values for 32 vs. 64 bit mode. */ +#ifdef USE_DOUBLE +# define NSIZE 8 +# define NSIZEMASK 0x3f +# define NSIZEDMASK 0x7f +#else +# define NSIZE 4 +# define NSIZEMASK 0x1f +# define NSIZEDMASK 0x3f +#endif +#define UNIT(unit) ((unit)*NSIZE) +#define UNITM1(unit) (((unit)*NSIZE)-1) - slti ta1, a2, 16 # Less than 16? - bne ta1, zero, L(last16) - move v0, a0 # Setup exit value before too late - - beq a1, zero, L(ueven) # If zero pattern, no need to extend - andi a1, 0xff # Avoid problems with bogus arguments - dsll ta0, a1, 8 - or a1, ta0 - dsll ta0, a1, 16 - or a1, ta0 # a1 is now pattern in full word - dsll ta0, a1, 32 - or a1, ta0 # a1 is now pattern in double word - -L(ueven): - PTR_SUBU ta0, zero, a0 # Unaligned address? - andi ta0, 0x7 - beq ta0, zero, L(chkw) - PTR_SUBU a2, ta0 - SDHI a1, 0(a0) # Yes, handle first unaligned part - PTR_ADDU a0, ta0 # Now both a0 and a2 are updated +#ifdef ANDROID_CHANGES +LEAF(MEMSET_NAME,0) +#else +LEAF(MEMSET_NAME) +#endif -L(chkw): - andi ta0, a2, 0xf # Enough left for one loop iteration? - beq ta0, a2, L(chkl) - PTR_SUBU a3, a2, ta0 - PTR_ADDU a3, a0 # a3 is last loop address +1 - move a2, ta0 # a2 is now # of bytes left after loop -L(loopw): - PTR_ADDIU a0, 16 # Handle 2 dwords pr. iteration - sd a1, -16(a0) - bne a0, a3, L(loopw) - sd a1, -8(a0) - -L(chkl): - andi ta0, a2, 0x8 # Check if there is at least a double - beq ta0, zero, L(last16) # word remaining after the loop - PTR_SUBU a2, ta0 - sd a1, 0(a0) # Yes... - PTR_ADDIU a0, 8 - -L(last16): - blez a2, L(exit) # Handle last 16 bytes (if cnt>0) - PTR_ADDU a3, a2, a0 # a3 is last address +1 -L(lst16l): - PTR_ADDIU a0, 1 - bne a0, a3, L(lst16l) - sb a1, -1(a0) -L(exit): - j ra # Bye, bye + .set nomips16 + .set noreorder +/* If the size is less than 2*NSIZE (8 or 16), go to L(lastb). Regardless of + size, copy dst pointer to v0 for the return value. */ + slti t2,a2,(2 * NSIZE) + bne t2,zero,L(lastb) + move v0,a0 + +/* If memset value is not zero, we copy it to all the bytes in a 32 or 64 + bit word. */ + beq a1,zero,L(set0) /* If memset value is zero no smear */ + PTR_SUBU a3,zero,a0 nop - .set reorder -END (memset) + /* smear byte into 32 or 64 bit word */ +#if ((__mips == 64) || (__mips == 32)) && (__mips_isa_rev >= 2) +# ifdef USE_DOUBLE + dins a1, a1, 8, 8 /* Replicate fill byte into half-word. */ + dins a1, a1, 16, 16 /* Replicate fill byte into word. */ + dins a1, a1, 32, 32 /* Replicate fill byte into dbl word. */ +# else + ins a1, a1, 8, 8 /* Replicate fill byte into half-word. */ + ins a1, a1, 16, 16 /* Replicate fill byte into word. */ +# endif +#else +# ifdef USE_DOUBLE + and a1,0xff + dsll t2,a1,8 + or a1,t2 + dsll t2,a1,16 + or a1,t2 + dsll t2,a1,32 + or a1,t2 +# else + and a1,0xff + sll t2,a1,8 + or a1,t2 + sll t2,a1,16 + or a1,t2 +# endif +#endif + +/* If the destination address is not aligned do a partial store to get it + aligned. If it is already aligned just jump to L(aligned). */ +L(set0): +#ifndef R6_CODE + andi t2,a3,(NSIZE-1) /* word-unaligned address? */ + beq t2,zero,L(aligned) /* t2 is the unalignment count */ + PTR_SUBU a2,a2,t2 + C_STHI a1,0(a0) + PTR_ADDU a0,a0,t2 +#else /* R6_CODE */ + andi t2,a0,(NSIZE-1) + lapc t9,L(atable) + PTR_LSA t9,t2,t9,2 + jrc t9 +L(atable): + bc L(aligned) +# ifdef USE_DOUBLE + bc L(lb7) + bc L(lb6) + bc L(lb5) + bc L(lb4) +# endif + bc L(lb3) + bc L(lb2) + bc L(lb1) +L(lb7): + sb a1,6(a0) +L(lb6): + sb a1,5(a0) +L(lb5): + sb a1,4(a0) +L(lb4): + sb a1,3(a0) +L(lb3): + sb a1,2(a0) +L(lb2): + sb a1,1(a0) +L(lb1): + sb a1,0(a0) + + li t9,NSIZE + subu t2,t9,t2 + PTR_SUBU a2,a2,t2 + PTR_ADDU a0,a0,t2 +#endif /* R6_CODE */ + +L(aligned): +/* If USE_DOUBLE is not set we may still want to align the data on a 16 + byte boundry instead of an 8 byte boundry to maximize the opportunity + of proAptiv chips to do memory bonding (combining two sequential 4 + byte stores into one 8 byte store). We know there are at least 4 bytes + left to store or we would have jumped to L(lastb) earlier in the code. */ +#ifdef DOUBLE_ALIGN + andi t2,a3,4 + beq t2,zero,L(double_aligned) + PTR_SUBU a2,a2,t2 + sw a1,0(a0) + PTR_ADDU a0,a0,t2 +L(double_aligned): +#endif -#else /* !__mips64 */ +/* Now the destination is aligned to (word or double word) aligned address + Set a2 to count how many bytes we have to copy after all the 64/128 byte + chunks are copied and a3 to the dest pointer after all the 64/128 byte + chunks have been copied. We will loop, incrementing a0 until it equals + a3. */ + andi t8,a2,NSIZEDMASK /* any whole 64-byte/128-byte chunks? */ + beq a2,t8,L(chkw) /* if a2==t8, no 64-byte/128-byte chunks */ + PTR_SUBU a3,a2,t8 /* subtract from a2 the reminder */ + PTR_ADDU a3,a0,a3 /* Now a3 is the final dst after loop */ -#if __BYTE_ORDER == __BIG_ENDIAN -# define SWHI swl /* high part is left in big-endian */ +/* When in the loop we may prefetch with the 'prepare to store' hint, + in this case the a0+x should not be past the "t0-32" address. This + means: for x=128 the last "safe" a0 address is "t0-160". Alternatively, + for x=64 the last "safe" a0 address is "t0-96" In the current version we + will use "prefetch hint,128(a0)", so "t0-160" is the limit. */ +#if defined(USE_PREFETCH) \ + && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) + PTR_ADDU t0,a0,a2 /* t0 is the "past the end" address */ + PTR_SUBU t9,t0,PREFETCH_LIMIT /* t9 is the "last safe pref" address */ +#endif +#if defined(USE_PREFETCH) \ + && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE) + PREFETCH_FOR_STORE (1, a0) + PREFETCH_FOR_STORE (2, a0) + PREFETCH_FOR_STORE (3, a0) +#endif + +L(loop16w): +#if defined(USE_PREFETCH) \ + && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) + sltu v1,t9,a0 /* If a0 > t9 don't use next prefetch */ + bgtz v1,L(skip_pref) + nop +#endif +#ifdef R6_CODE + PREFETCH_FOR_STORE (2, a0) #else -# define SWHI swr /* high part is right in little-endian */ + PREFETCH_FOR_STORE (4, a0) + PREFETCH_FOR_STORE (5, a0) #endif +L(skip_pref): + C_ST a1,UNIT(0)(a0) + C_ST a1,UNIT(1)(a0) + C_ST a1,UNIT(2)(a0) + C_ST a1,UNIT(3)(a0) + C_ST a1,UNIT(4)(a0) + C_ST a1,UNIT(5)(a0) + C_ST a1,UNIT(6)(a0) + C_ST a1,UNIT(7)(a0) + C_ST a1,UNIT(8)(a0) + C_ST a1,UNIT(9)(a0) + C_ST a1,UNIT(10)(a0) + C_ST a1,UNIT(11)(a0) + C_ST a1,UNIT(12)(a0) + C_ST a1,UNIT(13)(a0) + C_ST a1,UNIT(14)(a0) + C_ST a1,UNIT(15)(a0) + PTR_ADDIU a0,a0,UNIT(16) /* adding 64/128 to dest */ + bne a0,a3,L(loop16w) + nop + move a2,t8 -ENTRY (memset) - .set noreorder +/* Here we have dest word-aligned but less than 64-bytes or 128 bytes to go. + Check for a 32(64) byte chunk and copy if if there is one. Otherwise + jump down to L(chk1w) to handle the tail end of the copy. */ +L(chkw): + andi t8,a2,NSIZEMASK /* is there a 32-byte/64-byte chunk. */ + /* the t8 is the reminder count past 32-bytes */ + beq a2,t8,L(chk1w)/* when a2==t8, no 32-byte chunk */ + nop + C_ST a1,UNIT(0)(a0) + C_ST a1,UNIT(1)(a0) + C_ST a1,UNIT(2)(a0) + C_ST a1,UNIT(3)(a0) + C_ST a1,UNIT(4)(a0) + C_ST a1,UNIT(5)(a0) + C_ST a1,UNIT(6)(a0) + C_ST a1,UNIT(7)(a0) + PTR_ADDIU a0,a0,UNIT(8) + +/* Here we have less than 32(64) bytes to set. Set up for a loop to + copy one word (or double word) at a time. Set a2 to count how many + bytes we have to copy after all the word (or double word) chunks are + copied and a3 to the dest pointer after all the (d)word chunks have + been copied. We will loop, incrementing a0 until a0 equals a3. */ +L(chk1w): + andi a2,t8,(NSIZE-1) /* a2 is the reminder past one (d)word chunks */ + beq a2,t8,L(lastb) + PTR_SUBU a3,t8,a2 /* a3 is count of bytes in one (d)word chunks */ + PTR_ADDU a3,a0,a3 /* a3 is the dst address after loop */ - slti t1, a2, 8 # Less than 8? - bne t1, zero, L(last8) - move v0, a0 # Setup exit value before too late - - beq a1, zero, L(ueven) # If zero pattern, no need to extend - andi a1, 0xff # Avoid problems with bogus arguments - sll t0, a1, 8 - or a1, t0 - sll t0, a1, 16 - or a1, t0 # a1 is now pattern in full word - -L(ueven): - subu t0, zero, a0 # Unaligned address? - andi t0, 0x3 - beq t0, zero, L(chkw) - subu a2, t0 - SWHI a1, 0(a0) # Yes, handle first unaligned part - addu a0, t0 # Now both a0 and a2 are updated - -L(chkw): - andi t0, a2, 0x7 # Enough left for one loop iteration? - beq t0, a2, L(chkl) - subu a3, a2, t0 - addu a3, a0 # a3 is last loop address +1 - move a2, t0 # a2 is now # of bytes left after loop -L(loopw): - addiu a0, 8 # Handle 2 words pr. iteration - sw a1, -8(a0) - bne a0, a3, L(loopw) - sw a1, -4(a0) - -L(chkl): - andi t0, a2, 0x4 # Check if there is at least a full - beq t0, zero, L(last8) # word remaining after the loop - subu a2, t0 - sw a1, 0(a0) # Yes... - addiu a0, 4 - -L(last8): - blez a2, L(exit) # Handle last 8 bytes (if cnt>0) - addu a3, a2, a0 # a3 is last address +1 -L(lst8l): - addiu a0, 1 - bne a0, a3, L(lst8l) - sb a1, -1(a0) -L(exit): - j ra # Bye, bye +/* copying in words (4-byte or 8 byte chunks) */ +L(wordCopy_loop): + PTR_ADDIU a0,a0,UNIT(1) + bne a0,a3,L(wordCopy_loop) + C_ST a1,UNIT(-1)(a0) + +/* Copy the last 8 (or 16) bytes */ +L(lastb): + blez a2,L(leave) + PTR_ADDU a3,a0,a2 /* a3 is the last dst address */ +L(lastbloop): + PTR_ADDIU a0,a0,1 + bne a0,a3,L(lastbloop) + sb a1,-1(a0) +L(leave): + j ra nop + .set at .set reorder -END (memset) - -#endif /* !__mips64 */ +END(MEMSET_NAME) +#ifndef ANDROID_CHANGES +# ifdef _LIBC +# ifdef __UCLIBC__ +libc_hidden_def(MEMSET_NAME) +# else +libc_hidden_builtin_def (MEMSET_NAME) +# endif +# endif +#endif -libc_hidden_def(memset) diff --git a/libc/sysdeps/linux/common/bits/in.h b/libc/sysdeps/linux/common/bits/in.h index f4a340b..c67fbf8 100644 --- a/libc/sysdeps/linux/common/bits/in.h +++ b/libc/sysdeps/linux/common/bits/in.h @@ -120,7 +120,7 @@ struct in_pktinfo }; #endif -#ifdef __UCLIBC_HAS_IPV6__ +#if defined __UCLIBC_HAS_IPV6__ || !defined __UCLIBC_STRICT_HEADERS__ /* Options for use with `getsockopt' and `setsockopt' at the IPv6 level. The first word in the comment at the right is the data type used; "bool" means a boolean value stored in an `int'. */ diff --git a/libc/sysdeps/linux/common/pselect.c b/libc/sysdeps/linux/common/pselect.c index bf19ce3..3f1dd28 100644 --- a/libc/sysdeps/linux/common/pselect.c +++ b/libc/sysdeps/linux/common/pselect.c @@ -30,6 +30,57 @@ static int __NC(pselect)(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, const struct timespec *timeout, const sigset_t *sigmask) { +#ifdef __NR_pselect6 +#define NSEC_PER_SEC 1000000000L + struct timespec _ts, *ts = 0; + if (timeout) { + /* The Linux kernel can in some situations update the timeout value. + * We do not want that so use a local variable. + */ + _ts = *timeout; + + /* GNU extension: allow for timespec values where the sub-sec + * field is equal to or more than 1 second. The kernel will + * reject this on us, so take care of the time shift ourself. + * Some applications (like readline and linphone) do this. + * See 'clarification on select() type calls and invalid timeouts' + * on the POSIX general list for more information. + */ + if (_ts.tv_nsec >= NSEC_PER_SEC) { + _ts.tv_sec += _ts.tv_nsec / NSEC_PER_SEC; + _ts.tv_nsec %= NSEC_PER_SEC; + } + + ts = &_ts; + } + + /* The pselect6 syscall API is strange. It wants a 7th arg to be + * the sizeof(*sigmask). However syscalls with > 6 arguments aren't + * supported on linux. So arguments 6 and 7 are stuffed in a struct + * and a pointer to that struct is passed as the 6th argument to + * the syscall. + * Glibc stuffs arguments 6 and 7 in a ulong[2]. Linux reads + * them as if there were a struct { sigset_t*; size_t } in + * userspace. There woudl be trouble if userspace and the kernel are + * compiled differently enough that size_t isn't the same as ulong, + * but not enough to trigger the compat layer in linux. I can't + * think of such a case, so I'm using linux's struct. + * Furthermore Glibc sets the sigsetsize to _NSIG/8. However linux + * checks for sizeof(sigset_t), which internally is a ulong array. + * This means that if _NSIG isn't a multiple of BITS_PER_LONG then + * linux will refuse glibc's value. So I prefer sizeof(sigset_t) for + * the value of sigsetsize. + */ + struct { + const sigset_t *sigmask; + size_t sigsetsize; + } args67 = { + sigmask, + sizeof(sigset_t), + }; + + return INLINE_SYSCALL(pselect6, 6, nfds, readfds, writefds, exceptfds, ts, &args67); +#else struct timeval tval; int retval; sigset_t savemask; @@ -57,6 +108,7 @@ static int __NC(pselect)(int nfds, fd_set *readfds, fd_set *writefds, sigprocmask (SIG_SETMASK, &savemask, NULL); return retval; +#endif } CANCELLABLE_SYSCALL(int, pselect, (int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, const struct timespec *timeout, const sigset_t *sigmask), diff --git a/libpthread/nptl/init.c b/libpthread/nptl/init.c index bcd49ed..776bec7 100644 --- a/libpthread/nptl/init.c +++ b/libpthread/nptl/init.c @@ -382,6 +382,10 @@ __pthread_initialize_minimal_internal (void) Use the minimal size acceptable. */ limit.rlim_cur = PTHREAD_STACK_MIN; + /* Do not exceed architecture specific default */ + if (limit.rlim_cur > ARCH_STACK_DEFAULT_SIZE) + limit.rlim_cur = ARCH_STACK_DEFAULT_SIZE; + /* Make sure it meets the minimum size that allocate_stack (allocatestack.c) will demand, which depends on the page size. */ const uintptr_t pagesz = sysconf (_SC_PAGESIZE); hooks/post-receive -- uClibc-ng - small C library for embedded systems